Re: [PULL 1/9] softmmu: Support concurrent bounce buffers

[Peter Xu <peterx@redhat.com>]

On Fri, Sep 13, 2024 at 04:35:32PM +0200, Cédric Le Goater wrote:
> Hello,
> 
> +Mark (for the Mac devices)
> 
> On 9/9/24 22:11, Peter Xu wrote:
> > From: Mattias Nissler <mnissler@rivosinc.com>
> > 
> > When DMA memory can't be directly accessed, as is the case when
> > running the device model in a separate process without shareable DMA
> > file descriptors, bounce buffering is used.
> > 
> > It is not uncommon for device models to request mapping of several DMA
> > regions at the same time. Examples include:
> >   * net devices, e.g. when transmitting a packet that is split across
> >     several TX descriptors (observed with igb)
> >   * USB host controllers, when handling a packet with multiple data TRBs
> >     (observed with xhci)
> > 
> > Previously, qemu only provided a single bounce buffer per AddressSpace
> > and would fail DMA map requests while the buffer was already in use. In
> > turn, this would cause DMA failures that ultimately manifest as hardware
> > errors from the guest perspective.
> > 
> > This change allocates DMA bounce buffers dynamically instead of
> > supporting only a single buffer. Thus, multiple DMA mappings work
> > correctly also when RAM can't be mmap()-ed.
> > 
> > The total bounce buffer allocation size is limited individually for each
> > AddressSpace. The default limit is 4096 bytes, matching the previous
> > maximum buffer size. A new x-max-bounce-buffer-size parameter is
> > provided to configure the limit for PCI devices.
> > 
> > Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
> > Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> > Acked-by: Peter Xu <peterx@redhat.com>
> > Link: https://lore.kernel.org/r/20240819135455.2957406-1-mnissler@rivosinc.com
> > Signed-off-by: Peter Xu <peterx@redhat.com>
> > ---
> >   include/exec/memory.h       | 14 +++----
> >   include/hw/pci/pci_device.h |  3 ++
> >   hw/pci/pci.c                |  8 ++++
> >   system/memory.c             |  5 ++-
> >   system/physmem.c            | 82 ++++++++++++++++++++++++++-----------
> >   5 files changed, 76 insertions(+), 36 deletions(-)
> 
> Here is a report of a segv of the ppc64 mac99+cpu970 machine booting debian.
> See the stack trace below. Just wanted to let you know. I will digging further
> next week.
> 
> Thanks,
> 
> C.
> 
> 
> 
> Thread 1 "qemu-system-ppc" received signal SIGSEGV, Segmentation fault.
> address_space_unmap (len=<optimized out>, access_len=0, is_write=false, buffer=0x0,
>     as=0x5555565d45c0 <address_space_memory>) at ../system/physmem.c:3333
> 3333	    assert(bounce->magic == BOUNCE_BUFFER_MAGIC);
> (gdb) bt
> #0  address_space_unmap
>     (len=<optimized out>, access_len=0, is_write=false, buffer=0x0, as=0x5555565d45c0 <address_space_memory>)
>     at ../system/physmem.c:3333
> #1  address_space_unmap
>     (as=as@entry=0x5555565d45c0 <address_space_memory>, buffer=0x0, len=<optimized out>, is_write=<optimized out>, access_len=0) at ../system/physmem.c:3313
> #2  0x000055555595ea48 in dma_memory_unmap
>     (access_len=<optimized out>, dir=<optimized out>, len=<optimized out>, buffer=<optimized out>, as=<optimized out>) at /home/legoater/work/qemu/qemu.git/include/sysemu/dma.h:236
> #3  pmac_ide_atapi_transfer_cb (opaque=0x555556c06470, ret=<optimized out>) at ../hw/ide/macio.c:122
> #4  0x00005555559861f3 in DBDMA_run (s=0x555556c04c60) at ../hw/misc/macio/mac_dbdma.c:546
> #5  DBDMA_run_bh (opaque=0x555556c04c60) at ../hw/misc/macio/mac_dbdma.c:556
> #6  0x0000555555f19f33 in aio_bh_call (bh=bh@entry=0x555556ab5570) at ../util/async.c:171
> #7  0x0000555555f1a0f5 in aio_bh_poll (ctx=ctx@entry=0x5555566af150) at ../util/async.c:218
> #8  0x0000555555f0269e in aio_dispatch (ctx=0x5555566af150) at ../util/aio-posix.c:423
> #9  0x0000555555f19d8e in aio_ctx_dispatch
>     (source=<optimized out>, callback=<optimized out>, user_data=<optimized out>) at ../util/async.c:360
> #10 0x00007ffff7315f4f in g_main_context_dispatch () at /lib64/libglib-2.0.so.0
> #11 0x0000555555f1b488 in glib_pollfds_poll () at ../util/main-loop.c:287
> #12 os_host_main_loop_wait (timeout=2143429) at ../util/main-loop.c:310
> #13 main_loop_wait (nonblocking=nonblocking@entry=0) at ../util/main-loop.c:589
> #14 0x0000555555abeba3 in qemu_main_loop () at ../system/runstate.c:826
> #15 0x0000555555e63787 in qemu_default_main () at ../system/main.c:37
> #16 0x00007ffff6e29590 in __libc_start_call_main () at /lib64/libc.so.6
> #17 0x00007ffff6e29640 in __libc_start_main_impl () at /lib64/libc.so.6
> #18 0x000055555588d4f5 in _start ()

Thanks for the report!

Mattias,

Would you have time to take a look?

Thanks,

-- 
Peter Xu