Re: [PATCH net-next v3 1/2] dt-bindings: net: ethernet-phy: Add timing-role role property for ethernet PHYs

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Fri, Sep 13, 2024 at 10:40:21AM +0200, Oleksij Rempel wrote:
> This patch introduces a new `timing-role` property in the device tree
> bindings for configuring the master/slave role of PHYs. This is
> essential for scenarios where hardware strap pins are unavailable or
> incorrectly configured.
> 
> The `timing-role` property supports the following values:
> - `force-master`: Forces the PHY to operate as a master (clock source).
> - `force-slave`: Forces the PHY to operate as a slave (clock receiver).
> - `prefer-master`: Prefers the PHY to be master but allows negotiation.
> - `prefer-slave`: Prefers the PHY to be slave but allows negotiation.
> 
> The terms "master" and "slave" are retained in this context to align
> with the IEEE 802.3 standards, where they are used to describe the roles
> of PHY devices in managing clock signals for data transmission. In
> particular, the terms are used in specifications for 1000Base-T and
> MultiGBASE-T PHYs, among others. Although there is an effort to adopt
> more inclusive terminology, replacing these terms could create
> discrepancies between the Linux kernel and the established standards,
> documentation, and existing hardware interfaces.

Does this provide the boot-time default that userspace is subsequently
allowed to change through ethtool, or does it provide a fixed
configuration?

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!