[PATCH] arm: dts: broadcom: Add missing required fields

[Karan Sanghavi <karansanghvi98@gmail.com>]

Added below mentioned required fields
  1. interrupt-controller
  2. #interrupt-cells
in the bcm2711.dtsi file for the
interrupt-controller@40000000 block as defined in the
bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml.
This issue was noticed while compiling the dtb file
for broadcom/bcm2711-rpi-4-b.dts file.
After including the above fields in the dtsi file
interrupt-conntroller error was resolved.

Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com>
---
 arch/arm/boot/dts/broadcom/bcm2711.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
index e4e42af21ef3..313b1046d74f 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@@ -51,6 +51,8 @@ soc {
 		local_intc: interrupt-controller@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		gicv2: interrupt-controller@40041000 {
-- 
2.43.0