From: Shawn Guo <shawnguo2@yeah.net>
To: Frank Li <Frank.Li@nxp.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<imx@lists.linux.dev>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/6] arm64: dts: imx8qxp-mek: add esai, cs42888 and related node
Date: Mon, 21 Oct 2024 11:01:23 +0800 [thread overview]
Message-ID: <ZxXEA9TdHX5sEoEt@dragon> (raw)
In-Reply-To: <20240930212604.118756-2-Frank.Li@nxp.com>
On Mon, Sep 30, 2024 at 05:25:59PM -0400, Frank Li wrote:
> Add audio codec cs42888 and related node.
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb: esai@59010000: Unevaluated properties are not allowed ('power-domains' was unexpected)
> update binding patch already sent
> https://lore.kernel.org/linux-devicetree/20240927205618.4093591-1-Frank.Li@nxp.com/#R
> ---
> arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 84 +++++++++++++++++++
> 1 file changed, 84 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> index d8d9e2883caf7..9b9ad389a807a 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> @@ -50,6 +50,13 @@ usb3_data_ss: endpoint {
> };
> };
>
> + reg_audio: regulator-audio {
> + compatible = "regulator-fixed";
> + regulator-max-microvolt = <3300000>;
> + regulator-min-microvolt = <3300000>;
> + regulator-name = "cs42888_supply";
> + };
> +
> sound-bt-sco {
> compatible = "simple-audio-card";
> simple-audio-card,bitclock-inversion;
> @@ -69,6 +76,28 @@ btcpu: simple-audio-card,cpu {
> };
> };
>
> + sound-cs42888 {
> + compatible = "fsl,imx-audio-cs42888";
> + audio-asrc = <&asrc0>;
> + audio-codec = <&cs42888>;
> + audio-cpu = <&esai0>;
> + audio-routing =
> + "Line Out Jack", "AOUT1L",
> + "Line Out Jack", "AOUT1R",
> + "Line Out Jack", "AOUT2L",
> + "Line Out Jack", "AOUT2R",
> + "Line Out Jack", "AOUT3L",
> + "Line Out Jack", "AOUT3R",
> + "Line Out Jack", "AOUT4L",
> + "Line Out Jack", "AOUT4R",
> + "AIN1L", "Line In Jack",
> + "AIN1R", "Line In Jack",
> + "AIN2L", "Line In Jack",
> + "AIN2R", "Line In Jack";
> + model = "imx-cs42888";
> + status = "okay";
Unneeded "okay" status.
> + };
> +
> sound-wm8960 {
> compatible = "fsl,imx-audio-wm8960";
> model = "wm8960-audio";
> @@ -86,6 +115,15 @@ sound-wm8960 {
> };
> };
>
> +&amix {
> + status = "okay";
> +};
> +
> +&asrc0 {
> + fsl,asrc-rate = <48000>;
Double space before =
Shawn
> + status = "okay";
> +};
> +
> &dsp {
> memory-region = <&dsp_reserved>;
> status = "okay";
> @@ -95,6 +133,19 @@ &dsp_reserved {
> status = "okay";
> };
>
> +&esai0 {
> + assigned-clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
> + <&esai0_lpcg 0>;
> + assigned-clock-parents = <&aud_pll_div0_lpcg 0>;
> + assigned-clock-rates = <0>, <786432000>, <49152000>, <12288000>, <49152000>;
> + pinctrl-0 = <&pinctrl_esai0>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> &fec1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_fec1>;
> @@ -264,6 +315,24 @@ pca6416: gpio@20 {
> gpio-controller;
> #gpio-cells = <2>;
> };
> +
> + cs42888: audio-codec@48 {
> + compatible = "cirrus,cs42888";
> + reg = <0x48>;
> + clocks = <&mclkout0_lpcg 0>;
> + clock-names = "mclk";
> + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
> + <&mclkout0_lpcg 0>;
> + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
> + reset-gpios = <&pca9557_b 1 GPIO_ACTIVE_LOW>;
> + VA-supply = <®_audio>;
> + VD-supply = <®_audio>;
> + VLC-supply = <®_audio>;
> + VLS-supply = <®_audio>;
> +
> + };
> };
>
> &cm40_intmux {
> @@ -458,6 +527,21 @@ IMX8QXP_ADC_IN0_LSIO_GPIO1_IO10 0xc600004c
> >;
> };
>
> + pinctrl_esai0: esai0grp {
> + fsl,pins = <
> + IMX8QXP_ESAI0_FSR_ADMA_ESAI0_FSR 0xc6000040
> + IMX8QXP_ESAI0_FST_ADMA_ESAI0_FST 0xc6000040
> + IMX8QXP_ESAI0_SCKR_ADMA_ESAI0_SCKR 0xc6000040
> + IMX8QXP_ESAI0_SCKT_ADMA_ESAI0_SCKT 0xc6000040
> + IMX8QXP_ESAI0_TX0_ADMA_ESAI0_TX0 0xc6000040
> + IMX8QXP_ESAI0_TX1_ADMA_ESAI0_TX1 0xc6000040
> + IMX8QXP_ESAI0_TX2_RX3_ADMA_ESAI0_TX2_RX3 0xc6000040
> + IMX8QXP_ESAI0_TX3_RX2_ADMA_ESAI0_TX3_RX2 0xc6000040
> + IMX8QXP_ESAI0_TX4_RX1_ADMA_ESAI0_TX4_RX1 0xc6000040
> + IMX8QXP_ESAI0_TX5_RX0_ADMA_ESAI0_TX5_RX0 0xc6000040
> + >;
> + };
> +
> pinctrl_fec1: fec1grp {
> fsl,pins = <
> IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020
> --
> 2.34.1
>
next prev parent reply other threads:[~2024-10-21 3:01 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-30 21:25 [PATCH 1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec Frank Li
2024-09-30 21:25 ` [PATCH 2/6] arm64: dts: imx8qxp-mek: add esai, cs42888 and related node Frank Li
2024-10-21 3:01 ` Shawn Guo [this message]
2024-09-30 21:26 ` [PATCH 3/6] arm64: dts: imx8qxp-mek: enable jpeg encode and deconde Frank Li
2024-09-30 21:26 ` [PATCH 4/6] arm64: dts: imx8qxp-mek: add flexcan1 and flexcan2 Frank Li
2024-09-30 21:26 ` [PATCH 5/6] arm64: dts: imx8qxp-mek: add usbotg1 and related node Frank Li
2024-09-30 21:26 ` [PATCH 6/6] arm64: dts: imx8qxp-mek: add cm4 and related nodes Frank Li
2024-10-21 3:06 ` Shawn Guo
2024-10-02 3:51 ` [PATCH 1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec Rob Herring (Arm)
2024-10-18 19:39 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZxXEA9TdHX5sEoEt@dragon \
--to=shawnguo2@yeah.net \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.