From: Shawn Guo <shawnguo2@yeah.net>
To: Tim Harvey <tharvey@gateworks.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/2] arm64: dts: imx: Add i.MX8M Plus Gateworks GW82XX-2X support
Date: Tue, 22 Oct 2024 15:03:24 +0800 [thread overview]
Message-ID: <ZxdOPNe1du9Ho8nm@dragon> (raw)
In-Reply-To: <20241018182444.817848-2-tharvey@gateworks.com>
On Fri, Oct 18, 2024 at 11:24:46AM -0700, Tim Harvey wrote:
> The Gateworks GW82XX-2X is an ARM based single board computer (SBC)
> comprised of the i.MX8M Plus based gw702x SoM and the gw82xx baseboard
> featuring:
> - i.MX8M Plus SoC
> - LPDDR4 DRAM
> - eMMC FLASH
> - Gateworks System Controller (GSC)
> - microSD (1.8V/3.3V Capable)
> - panel status bi-color LED
> - pushbutton switch
> - fan controller with tachometer
> - USB Type-C connector
> - PCIe switch
> - 2x GbE RJ45 connectors
> - multi-protocol RS232/RS485/RS422 Serial ports
> - 2x Flexible Socket Adapters with SDIO/UART/USB/PCIe
> (for M.2 and miniPCIe expansion)
> - 2x isolated CAN
> - GPS
> - accelerometer
> - magnetometer
> - off-board connectors for: SPI, GPIO, I2C, ADC
> - Wide range DC power input
> - support for 802.3at PoE (via adapter)
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../dts/freescale/imx8mp-venice-gw82xx-2x.dts | 19 +
> .../dts/freescale/imx8mp-venice-gw82xx.dtsi | 537 ++++++++++++++++++
> 3 files changed, 557 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 91b72a1d5bb8..d1f205187454 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -196,6 +196,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw73xx-2x.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw75xx-2x.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw82xx-2x.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-ivy.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts
> new file mode 100644
> index 000000000000..597813308630
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts
> @@ -0,0 +1,19 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2024 Gateworks Corporation
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mp.dtsi"
> +#include "imx8mp-venice-gw702x.dtsi"
> +#include "imx8mp-venice-gw82xx.dtsi"
> +
> +/ {
> + model = "Gateworks Venice GW82xx-2x i.MX8MP Development Kit";
> + compatible = "gateworks,imx8mp-gw82xx-2x", "fsl,imx8mp";
> +
> + chosen {
> + stdout-path = &uart2;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx.dtsi
> new file mode 100644
> index 000000000000..83e7dada92f6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx.dtsi
> @@ -0,0 +1,537 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2024 Gateworks Corporation
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/phy/phy-imx8-pcie.h>
> +
> +/ {
> + aliases {
> + ethernet1 = ð1;
> + fsa1 = &fsa0;
> + fsa2 = &fsa1;
> + };
> +
> + led-controller {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_leds>;
> +
> + led-0 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_GREEN>;
> + gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + linux,default-trigger = "heartbeat";
> + };
> +
> + led-1 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_RED>;
> + gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
> + default-state = "off";
> + };
> + };
> +
> + pcie0_refclk: clock-pcie0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <100000000>;
> + };
> +
> + pps {
> + compatible = "pps-gpio";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pps>;
> + gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
> + };
> +
> + reg_usb2_vbus: regulator-usb2 {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_reg_usb2_en>;
> + regulator-name = "usb2_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
> + regulator-name = "VDD_3V3_SD";
> + regulator-max-microvolt = <3300000>;
> + regulator-min-microvolt = <3300000>;
> + gpio = <&gpio2 19 0>; /* SD2_RESET */
Could you use GPIO_ACTIVE_HIGH?
> + enable-active-high;
> + off-on-delay-us = <12000>;
> + startup-delay-us = <100>;
> + };
> +};
> +
> +&ecspi2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi2>;
> + cs-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>, /* CS0 onboard TPM */
> + <&gpio5 13 GPIO_ACTIVE_LOW>, /* CS1 off-board J32 SPI */
> + <&gpio1 12 GPIO_ACTIVE_LOW>, /* CS3 off-board J52 FSA1 */
> + <&gpio4 26 GPIO_ACTIVE_LOW>; /* CS2 off-board J51 FSA2 */
> + status = "okay";
> +
> + tpm@0 {
> + compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
> + reg = <0x0>;
> + spi-max-frequency = <10000000>;
> + };
> +};
> +
> +&flexcan1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_can1>;
> + status = "okay";
> +};
> +
> +&flexcan2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_can2>;
> + status = "okay";
> +};
> +
> +&gpio1 {
> + gpio-line-names =
> + "", "", "", "",
> + "", "", "", "",
> + "", "", "", "",
> + "", "fsa2_gpio1", "", "",
> + "", "", "", "",
> + "", "", "", "",
> + "", "", "", "",
> + "", "", "", "";
> +};
> +
> +&gpio4 {
> + gpio-line-names =
> + "", "", "", "",
> + "", "", "", "",
> + "dio1", "fsa1_gpio2", "", "dio0",
> + "", "", "", "",
> + "", "", "", "",
> + "", "", "rs485_en", "rs485_term",
> + "fsa2_gpio2", "fsa1_gpio1", "", "rs485_half",
> + "", "", "", "";
> +};
> +
> +&i2c2 {
> + accelerometer@19 {
> + compatible = "st,lis2de12";
> + reg = <0x19>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_accel>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
> + st,drdy-int-pin = <1>;
> + };
> +
> + magnetometer@1e {
> + compatible = "st,lis2mdl";
> + reg = <0x1e>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mag>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> + st,drdy-int-pin = <1>;
Could you check Rob's bot warning?
Shawn
> + };
> +};
> +
> +&i2c3 {
> + i2c-mux@70 {
> + compatible = "nxp,pca9548";
> + reg = <0x70>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* J30 */
> + fsa1: i2c@0 {
> + reg = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fsa2i2c>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio@20 {
> + compatible = "nxp,pca9555";
> + reg = <0x20>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + eeprom@54 {
> + compatible = "atmel,24c02";
> + reg = <0x54>;
> + pagesize = <16>;
> + };
> +
> + eeprom@55 {
> + compatible = "atmel,24c02";
> + reg = <0x55>;
> + pagesize = <16>;
> + };
> + };
> +
> + /* J29 */
> + fsa0: i2c@1 {
> + reg = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fsa1i2c>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio@20 {
> + compatible = "nxp,pca9555";
> + reg = <0x20>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + eeprom@54 {
> + compatible = "atmel,24c02";
> + reg = <0x54>;
> + pagesize = <16>;
> + };
> +
> + eeprom@55 {
> + compatible = "atmel,24c02";
> + reg = <0x55>;
> + pagesize = <16>;
> + };
> + };
> +
> + /* J33 */
> + i2c@2 {
> + reg = <2>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +};
> +
> +&pcie_phy {
> + clocks = <&pcie0_refclk>;
> + clock-names = "ref";
> + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> + fsl,clkreq-unsupported;
> + status = "okay";
> +};
> +
> +&pcie {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie0>;
> + reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +
> + pcie@0,0 {
> + reg = <0x0000 0 0 0 0>;
> + device_type = "pci";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges;
> +
> + pcie@0,0 {
> + reg = <0x0000 0 0 0 0>;
> + device_type = "pci";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges;
> +
> + pcie@7,0 {
> + reg = <0x3800 0 0 0 0>;
> + device_type = "pci";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges;
> +
> + eth1: ethernet@0,0 {
> + reg = <0x0000 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges;
> + local-mac-address = [00 00 00 00 00 00];
> + };
> + };
> + };
> + };
> +};
> +
> +/* GPS */
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +/* RS232 */
> +&uart4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4>;
> + status = "okay";
> +};
> +
> +/* USB1 - FSA1 */
> +&usb3_0 {
> + fsl,permanently-attached;
> + fsl,disable-port-power-control;
> + status = "okay";
> +};
> +
> +&usb3_phy0 {
> + status = "okay";
> +};
> +
> +&usb_dwc3_0 {
> + adp-disable;
> + hnp-disable;
> + srp-disable;
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +/* USB2 - USB3.0 Hub */
> +&usb3_1 {
> + fsl,permanently-attached;
> + fsl,disable-port-power-control;
> + status = "okay";
> +};
> +
> +&usb3_phy1 {
> + vbus-supply = <®_usb2_vbus>;
> + status = "okay";
> +};
> +
> +&usb_dwc3_1 {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +/* SDIO 1.8V */
> +&usdhc1 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> + bus-width = <4>;
> + non-removable;
> + status = "okay";
> +};
> +
> +/* microSD */
> +&usdhc2 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> + cd-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; /* CD is active high */
> + bus-width = <4>;
> + vmmc-supply = <®_usdhc2_vmmc>;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08 0x40000146 /* DIO1 */
> + MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11 0x40000146 /* DIO0 */
> + MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x40000106 /* RS485_HALF */
> + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x40000106 /* RS485_EN */
> + MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x40000106 /* RS485_TERM */
> + >;
> + };
> +
> + pinctrl_accel: accelgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x150 /* IRQ# */
> + >;
> + };
> +
> + pinctrl_can1: can1grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
> + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
> + >;
> + };
> +
> + pinctrl_can2: can2grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154
> + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154
> + >;
> + };
> +
> + pinctrl_gpio_leds: gpioledgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x6 /* LEDG */
> + MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x6 /* LEDR */
> + >;
> + };
> +
> + pinctrl_fsa1i2c: fsa1i2cgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 0x1d0 /* FSA1_ALERT# */
> + MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x400001d0 /* FSA1_GPIO1 */
> + MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09 0x400001d0 /* FSA1_GPIO2 */
> + >;
> + };
> +
> + pinctrl_fsa2i2c: fsa2i2cgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04 0x1d0 /* FSA2_ALERT# */
> + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x400001d0 /* FSA2_GPIO1 */
> + MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x400001d0 /* FSA2_GPIO2 */
> + >;
> + };
> +
> + pinctrl_mag: maggrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x140 /* IRQ# */
> + >;
> + };
> +
> + pinctrl_pcie0: pcie0grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x106 /* PERST# */
> + >;
> + };
> +
> + pinctrl_pps: ppsgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x146
> + >;
> + };
> +
> + pinctrl_reg_usb2_en: regusb2grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x146 /* USBHUB_RST# */
> + >;
> + };
> +
> + pinctrl_spi2: spi2grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0xd0
> + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0xd0
> + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0xd0
> + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140 /* J32_CS */
> + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140 /* TPM_CS */
> + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x140 /* FSA1_CS */
> + MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x140 /* FSA2_CS */
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
> + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
> + >;
> + };
> +
> + pinctrl_uart4: uart4grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140
> + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
> + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
> + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
> + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
> + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
> + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
> + >;
> + };
> +
> + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194
> + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4
> + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4
> + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4
> + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4
> + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4
> + >;
> + };
> +
> + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196
> + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6
> + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6
> + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6
> + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6
> + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
> + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
> + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
> + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
> + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
> + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
> + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
> + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
> + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
> + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
> + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
> + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
> + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
> + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
> + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
> + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
> + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
> + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
> + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x1d0
> + >;
> + };
> +
> + pinctrl_usdhc2_gpio: usdhc2gpiogrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
> + >;
> + };
> +};
> --
> 2.25.1
>
next prev parent reply other threads:[~2024-10-22 7:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-18 18:24 [PATCH 1/2] dt-bindings: arm: fsl: Add Gateworks GW82XX-2x dev kit Tim Harvey
2024-10-18 18:24 ` [PATCH 2/2] arm64: dts: imx: Add i.MX8M Plus Gateworks GW82XX-2X support Tim Harvey
2024-10-22 7:03 ` Shawn Guo [this message]
2024-10-21 8:01 ` [PATCH 1/2] dt-bindings: arm: fsl: Add Gateworks GW82XX-2x dev kit Krzysztof Kozlowski
2024-10-21 17:58 ` Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZxdOPNe1du9Ho8nm@dragon \
--to=shawnguo2@yeah.net \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.