All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Kocialkowski <paulk@sys-base.io>
To: Quentin Schulz <foss+uboot@0leil.net>
Cc: Tom Rini <trini@konsulko.com>, Simon Glass <sjg@chromium.org>,
	Philipp Tomsich <philipp.tomsich@vrull.eu>,
	Kever Yang <kever.yang@rock-chips.com>,
	Klaus Goger <klaus.goger@cherry.de>,
	u-boot@lists.denx.de, Paul Kocialkowski <contact@paulk.fr>,
	Quentin Schulz <quentin.schulz@cherry.de>
Subject: Re: [PATCH next 5/5] rockchip: configs: puma-rk3399: do the system reset in TPL
Date: Tue, 5 Nov 2024 19:40:30 +0100	[thread overview]
Message-ID: <ZypmnjLPPZ9aC26c@collins> (raw)
In-Reply-To: <20241105-rk3399-sysreset-gpio-tpl-v1-5-12caff07a4e4@cherry.de>

[-- Attachment #1: Type: text/plain, Size: 1845 bytes --]

Hi,

Le Tue 05 Nov 24, 16:36, Quentin Schulz a écrit :
> From: Quentin Schulz <quentin.schulz@cherry.de>
> 
> RK3399 Puma can trigger a full system reset at runtime by toggling a
> GPIO. This is done whenever the system has NOT cold booted (i.e. from a
> power cycle). For RK3399 Puma, this is currently done in SPL but only
> because when this was implemented TPL wasn't used on RK3399 (or at least
> not Puma). Now that we have TPL on RK3399 (and Puma), it makes sense to
> trigger this reset as early as possible, so let's enable the drivers
> required in TPL (Rockchip GPIO and pinctrl).
> 
> Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>

Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>

Cheers,

Paul

> ---
>  configs/puma-rk3399_defconfig | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
> index 67c0ee72c925cdd49066980b0fde4131c86a99a8..7a180b1413036234d834773778f6c0f0a7e85380 100644
> --- a/configs/puma-rk3399_defconfig
> +++ b/configs/puma-rk3399_defconfig
> @@ -30,6 +30,7 @@ CONFIG_SPL_I2C=y
>  CONFIG_SPL_POWER=y
>  CONFIG_SPL_SPI_LOAD=y
>  CONFIG_TPL=y
> +CONFIG_TPL_GPIO=y
>  # CONFIG_BOOTM_NETBSD is not set
>  # CONFIG_BOOTM_PLAN9 is not set
>  # CONFIG_BOOTM_RTEMS is not set
> @@ -78,6 +79,8 @@ CONFIG_ETH_DESIGNWARE=y
>  CONFIG_GMAC_ROCKCHIP=y
>  CONFIG_PHY_ROCKCHIP_INNO_USB2=y
>  CONFIG_PHY_ROCKCHIP_TYPEC=y
> +CONFIG_TPL_PINCTRL=y
> +CONFIG_TPL_PINCTRL_FULL=y
>  CONFIG_DM_PMIC_FAN53555=y
>  CONFIG_PMIC_RK8XX=y
>  CONFIG_SPL_PMIC_RK8XX=y
> 
> -- 
> 2.47.0
> 

-- 
Paul Kocialkowski,

Independent contractor - sys-base - https://www.sys-base.io/
Free software developer - https://www.paulk.fr/

Specialist in multimedia, graphics and embedded hardware support with Linux.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  reply	other threads:[~2024-11-05 18:40 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-05 15:36 [PATCH next 0/5] rockchip: rk3399: allow to trigger sysreset in TPL Quentin Schulz
2024-11-05 15:36 ` [PATCH next 1/5] pinctrl: rockchip: allow to build for TPL Quentin Schulz
2024-11-05 18:34   ` Paul Kocialkowski
2024-11-05 15:36 ` [PATCH next 2/5] rockchip: rk3399: merge CRU check within rk3399_force_power_on_reset Quentin Schulz
2024-11-05 18:36   ` Paul Kocialkowski
2024-11-05 15:36 ` [PATCH next 3/5] rockchip: tpl: allow to call board/SoC-specific code before DRAM init Quentin Schulz
2024-11-05 18:37   ` Paul Kocialkowski
2024-11-05 15:36 ` [PATCH next 4/5] rockchip: rk3399: allow to handle sysreset-gpio in TPL Quentin Schulz
2024-11-05 18:40   ` Paul Kocialkowski
2024-11-05 18:44   ` Paul Kocialkowski
2024-11-05 15:36 ` [PATCH next 5/5] rockchip: configs: puma-rk3399: do the system reset " Quentin Schulz
2024-11-05 18:40   ` Paul Kocialkowski [this message]
2024-11-05 18:45 ` [PATCH next 0/5] rockchip: rk3399: allow to trigger sysreset " Paul Kocialkowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZypmnjLPPZ9aC26c@collins \
    --to=paulk@sys-base.io \
    --cc=contact@paulk.fr \
    --cc=foss+uboot@0leil.net \
    --cc=kever.yang@rock-chips.com \
    --cc=klaus.goger@cherry.de \
    --cc=philipp.tomsich@vrull.eu \
    --cc=quentin.schulz@cherry.de \
    --cc=sjg@chromium.org \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.