Re: [PATCH v2 01/22] HID: THC: Add documentation

[Bagas Sanjaya <bagasdotme@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 6040 bytes --]

On Fri, Nov 15, 2024 at 05:10:55AM +0000, Xu, Even wrote:
> 
> 
> > -----Original Message-----
> > From: Bagas Sanjaya <bagasdotme@gmail.com>
> > Sent: Friday, November 15, 2024 12:04 PM
> > To: Xu, Even <even.xu@intel.com>; jikos@kernel.org; bentiss@kernel.org;
> > corbet@lwn.net; Aaron, Ma <aaron.ma@canonical.com>
> > Cc: linux-input@vger.kernel.org; linux-kernel@vger.kernel.org; linux-
> > doc@vger.kernel.org; Sun, Xinpeng <xinpeng.sun@intel.com>; Srinivas
> > Pandruvada <srinivas.pandruvada@linux.intel.com>
> > Subject: Re: [PATCH v2 01/22] HID: THC: Add documentation
> > 
> > On Thu, Nov 14, 2024 at 01:33:55PM +0800, Even Xu wrote:
> > > +Touch Host Controller is the name of the IP block in PCH that interface with
> > Touch Devices (ex:
> > > +touchscreen, touchpad etc.). It is comprised of 3 key functional blocks:
> > > +- A natively half-duplex Quad I/O capable SPI master
> > > +- Low latency I2C interface to support HIDI2C compliant devices
> > > +- A HW sequencer with RW DMA capability to system memory
> > 
> > I see in my htmldocs output that the list above is long running paragraph instead.
> 
> You are right, let me fix it in next version.

OK.

> 
> > 
> > > +When THC is configured to SPI mode, opcodes are used for determining the
> > read/write IO mode.
> > > +There are some OPCode examples for SPI IO mode::
> > > +
> > > + +--------+---------------------------------+
> > > + | opcode |  Corresponding SPI command      |
> > > + +========+=================================+
> > > + |  0x0B  | Read Single I/O                 |
> > > + +--------+---------------------------------+
> > > + |  0x02  | Write Single I/O                |
> > > + +--------+---------------------------------+
> > > + |  0xBB  | Read Dual I/O                   |
> > > + +--------+---------------------------------+
> > > + |  0xB2  | Write Dual I/O                  |
> > > + +--------+---------------------------------+
> > > + |  0xEB  | Read Quad I/O                   |
> > > + +--------+---------------------------------+
> > > + |  0xE2  | Write Quad I/O                  |
> > > + +--------+---------------------------------+
> > > +
> > > <snipped>...
> > > +When THC is working in I2C mode, opcodes are used to tell THC what's the
> > next PIO type:
> > > +I2C SubIP APB register read, I2C SubIP APB register write, I2C touch
> > > +IC device read, I2C touch IC device write, I2C touch IC device write followed
> > by read.
> > > +
> > > +Here are the THC pre-defined opcodes for I2C mode::
> > > +
> > > + +--------+-------------------------------------------+----------+
> > > + | opcode |       Corresponding I2C command           | Address  |
> > > +
> > +========+===========================================+==========+
> > > + |  0x12  | Read I2C SubIP APB internal registers     | 0h - FFh |
> > > + +--------+-------------------------------------------+----------+
> > > + |  0x13  | Write I2C SubIP APB internal registers    | 0h - FFh |
> > > + +--------+-------------------------------------------+----------+
> > > + |  0x14  | Read external Touch IC through I2C bus    | N/A      |
> > > + +--------+-------------------------------------------+----------+
> > > + |  0x18  | Write external Touch IC through I2C bus   | N/A      |
> > > + +--------+-------------------------------------------+----------+
> > > + |  0x1C  | Write then read external Touch IC through | N/A      |
> > > + |        | I2C bus                                   |          |
> > > + +--------+-------------------------------------------+----------+
> > > +
> > > <snipped>...
> > > +Intel THC uses PRD entry descriptor for every PRD entry. Every PRD
> > > +entry descriptor occupies
> > > +128 bits memories::
> > > +
> > > + +-------------------+---------+------------------------------------------------+
> > > + | struct field      | bit(s)  | description                                    |
> > > +
> > +===================+=========+==================================
> > ===
> > > + +===========+
> > > + | dest_addr         | 53..0   | destination memory address, as every entry     |
> > > + |                   |         | is 4KB, ignore lowest 10 bits of address.      |
> > > + +-------------------+---------+------------------------------------------------+
> > > + | reserved1         | 54..62  | reserved                                       |
> > > + +-------------------+---------+------------------------------------------------+
> > > + | int_on_completion | 63      | completion interrupt enable bit, if this bit   |
> > > + |                   |         | set it means THC will trigger a completion     |
> > > + |                   |         | interrupt. This bit is set by SW driver.       |
> > > + +-------------------+---------+------------------------------------------------+
> > > + | len               | 87..64  | how many bytes of data in this entry.          |
> > > + +-------------------+---------+------------------------------------------------+
> > > + | end_of_prd        | 88      | end of PRD table bit, if this bit is set,      |
> > > + |                   |         | it means this entry is last entry in this PRD  |
> > > + |                   |         | table. This bit is set by SW driver.           |
> > > + +-------------------+---------+------------------------------------------------+
> > > + | hw_status         | 90..89  | HW status bits                                 |
> > > + +-------------------+---------+------------------------------------------------+
> > > + | reserved2         | 127..91 | reserved                                       |
> > > + +-------------------+---------+------------------------------------------------+
> > 
> > Shouldn't these tables be formatted as tables?
> 
> Good idea!
> Let's format them.

Just drop the literal block formatting, keeping the table as-is.

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]