From: tjiang@codeaurora.org
To: marcel@holtmann.org, johan.hedberg@gmail.com, luiz.dentz@gmail.com
Cc: linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
linux-arm-msm@vger.kernel.org, bgodavar@codeaurora.org,
c-hbandi@codeaurora.org, hemantg@codeaurora.org,
mka@chromium.org, rjliao@codeaurora.org, zijuhu@codeaurora.org,
tjiang@codeaurora.org
Subject: [PATCH v12] Bluetooth: btusb: Add support using different nvm for variant WCN6855 controller
Date: Wed, 29 Sep 2021 16:36:20 +0800 [thread overview]
Message-ID: <a1ce8bbbf391d39f126d4f8fa7cae541@codeaurora.org> (raw)
the RF performance of wcn6855 soc chip from different foundries will be
difference, so we should use different nvm to configure them.
Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
---
drivers/bluetooth/btusb.c | 54
+++++++++++++++++++++++++++++++++++------------
1 file changed, 40 insertions(+), 14 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index da85cc14f931..0a75c82796aa 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3186,6 +3186,9 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev
*hdev,
#define QCA_DFU_TIMEOUT 3000
#define QCA_FLAG_MULTI_NVM 0x80
+#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
+#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
+
struct qca_version {
__le32 rom_version;
__le32 patch_version;
@@ -3217,6 +3220,7 @@ static const struct qca_device_info
qca_devices_table[] = {
{ 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
{ 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
{ 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
+ { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
};
static int btusb_qca_send_vendor_req(struct usb_device *udev, u8
request,
@@ -3371,6 +3375,41 @@ static int btusb_setup_qca_load_rampatch(struct
hci_dev *hdev,
return err;
}
+static void btusb_generate_qca_nvm_name(char *fwname,
+ size_t max_size,
+ struct qca_version *ver)
+{
+ u32 rom_version = le32_to_cpu(ver->rom_version);
+
+ if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
+ u16 board_id = le16_to_cpu(ver->board_id);
+ const char *variant;
+
+ switch (ver->ram_version) {
+ case WCN6855_2_0_RAM_VERSION_GF:
+ case WCN6855_2_1_RAM_VERSION_GF:
+ variant = "_gf";
+ break;
+ default:
+ variant = "";
+ break;
+ }
+
+ /* if boardid equal 0, use default nvm without suffix */
+ if (board_id == 0x0) {
+ snprintf(fwname, max_size, "qca/nvm_usb_%08x%s.bin",
+ rom_version, variant);
+ } else {
+ snprintf(fwname, max_size, "qca/nvm_usb_%08x%s_%04x.bin",
+ rom_version, variant, board_id);
+ }
+ } else {
+ snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin",
+ rom_version);
+ }
+
+}
+
static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
struct qca_version *ver,
const struct qca_device_info *info)
@@ -3379,20 +3418,7 @@ static int btusb_setup_qca_load_nvm(struct
hci_dev *hdev,
char fwname[64];
int err;
- if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
- /* if boardid equal 0, use default nvm without surfix */
- if (le16_to_cpu(ver->board_id) == 0x0) {
- snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
- le32_to_cpu(ver->rom_version));
- } else {
- snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin",
- le32_to_cpu(ver->rom_version),
- le16_to_cpu(ver->board_id));
- }
- } else {
- snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
- le32_to_cpu(ver->rom_version));
- }
+ btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver);
err = request_firmware(&fw, fwname, &hdev->dev);
if (err) {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum, a Linux Foundation Collaborative Project
reply other threads:[~2021-09-29 8:36 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a1ce8bbbf391d39f126d4f8fa7cae541@codeaurora.org \
--to=tjiang@codeaurora.org \
--cc=bgodavar@codeaurora.org \
--cc=c-hbandi@codeaurora.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel@holtmann.org \
--cc=mka@chromium.org \
--cc=rjliao@codeaurora.org \
--cc=zijuhu@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.