From: Jon Hunter <jonathanh@nvidia.com>
To: Manikanta Maddireddy <mmaddireddy@nvidia.com>,
bhelgaas@google.com, lpieralisi@kernel.org,
kwilczynski@kernel.org, mani@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
thierry.reding@gmail.com, jingoohan1@gmail.com,
vidyas@nvidia.com, cassel@kernel.org, 18255117159@163.com
Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH V4 04/22] PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP
Date: Fri, 30 Jan 2026 17:21:22 +0000 [thread overview]
Message-ID: <a39410ec-4054-40eb-a687-0f161cffff2c@nvidia.com> (raw)
In-Reply-To: <20260126074519.3426742-5-mmaddireddy@nvidia.com>
On 26/01/2026 07:45, Manikanta Maddireddy wrote:
> From: Vidya Sagar <vidyas@nvidia.com>
>
> PERST# and CLKREQ# pinctrl settings should be applied for both root port
> and endpoint mode. Move pinctrl_pm_select_default_state() function call
> from root port specific configuration function to probe().
>
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
> ---
> V4:
> * None
>
> V3:
> * None
>
> V2:
> * None
>
> drivers/pci/controller/dwc/pcie-tegra194.c | 19 +++++++++++++------
> 1 file changed, 13 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index 0b8c1a7ca232..04ff211deaea 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -1645,12 +1645,6 @@ static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie)
> goto fail_pm_get_sync;
> }
>
> - ret = pinctrl_pm_select_default_state(dev);
> - if (ret < 0) {
> - dev_err(dev, "Failed to configure sideband pins: %d\n", ret);
> - goto fail_pm_get_sync;
> - }
> -
> ret = tegra_pcie_init_controller(pcie);
> if (ret < 0) {
> dev_err(dev, "Failed to initialize controller: %d\n", ret);
> @@ -2106,6 +2100,19 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev)
> pp = &pci->pp;
> pp->num_vectors = MAX_MSI_IRQS;
>
> + ret = pinctrl_pm_select_default_state(dev);
> + if (ret < 0) {
> + const char *level = KERN_ERR;
> +
> + if (ret == -EPROBE_DEFER)
> + level = KERN_DEBUG;
> +
> + dev_printk(level, dev,
> + "Failed to configure sideband pins: %d\n",
> + ret);
We can now use dev_err_probe() to handle the above and this becomes ...
if (ret < 0)
return dev_err_probe(dev, ret, "Failed to configure sideband pins: %d\n", ret);
> + return ret;
> + }
> +
> ret = tegra_pcie_dw_parse_dt(pcie);
> if (ret < 0) {
> const char *level = KERN_ERR;
--
nvpublic
next prev parent reply other threads:[~2026-01-30 17:21 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-26 7:44 [PATCH V4 00/22] Enhancements to pcie-tegra194 driver Manikanta Maddireddy
2026-01-26 7:44 ` [PATCH V4 01/22] PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select" Manikanta Maddireddy
2026-01-26 7:44 ` [PATCH V4 02/22] PCI: tegra194: Drive CLKREQ signal low explicitly Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 03/22] PCI: tegra194: Fix polling delay for L2 state Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 04/22] PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP Manikanta Maddireddy
2026-01-30 17:21 ` Jon Hunter [this message]
2026-02-02 5:22 ` Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 05/22] PCI: tegra194: Refactor LTSSM state polling on surprise down Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 06/22] PCI: tegra194: Disable direct speed change for EP Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 07/22] PCI: tegra194: Calibrate P2U for endpoint mode Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 08/22] PCI: tegra194: Free resources during controller deinitialization Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 09/22] PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 10/22] PCI: tegra194: Enable DMA interrupt Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 11/22] PCI: tegra194: Enable hardware hot reset mode in Endpoint Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 12/22] PCI: tegra194: Allow system suspend when the Endpoint link is not up Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 13/22] PCI: tegra194: Disable L1.2 capability of Tegra234 EP Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 14/22] PCI: tegra194: Set LTR message request before PCIe link up Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 15/22] PCI: tegra194: Don't force the device into the D0 state before L2 Manikanta Maddireddy
2026-02-02 13:27 ` Jon Hunter
2026-01-26 7:45 ` [PATCH V4 16/22] PCI: tegra194: Free up EP resources during remove() Manikanta Maddireddy
2026-02-02 13:28 ` Jon Hunter
2026-01-26 7:45 ` [PATCH V4 17/22] dt-bindings: PCI: tegra194: Add monitor clock support Manikanta Maddireddy
2026-01-29 16:40 ` Rob Herring
2026-02-02 4:34 ` Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 18/22] PCI: tegra194: Add core " Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 19/22] PCI: tegra194: Add ASPM L1 entrance latency config Manikanta Maddireddy
2026-02-02 13:28 ` Jon Hunter
2026-01-26 7:45 ` [PATCH V4 20/22] PCI: tegra194: Use HW version number Manikanta Maddireddy
2026-02-02 13:30 ` Jon Hunter
2026-01-26 7:45 ` [PATCH V4 21/22] PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 22/22] PCI: tegra194: Disable PERST IRQ only in Endpoint mode Manikanta Maddireddy
2026-02-02 13:35 ` [PATCH V4 00/22] Enhancements to pcie-tegra194 driver Jon Hunter
2026-02-05 7:55 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a39410ec-4054-40eb-a687-0f161cffff2c@nvidia.com \
--to=jonathanh@nvidia.com \
--cc=18255117159@163.com \
--cc=bhelgaas@google.com \
--cc=cassel@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jingoohan1@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=mmaddireddy@nvidia.com \
--cc=robh@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=vidyas@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.