Re: [PATCH 7/7] dt-bindings: beagle: Add BeagleConnect Freedom

[Krzysztof Kozlowski <krzk@kernel.org>]

On 20/08/2026 11:25, Ayush Singh wrote:
> Add devicetree bindings for the BeagleBoard.org BeagleConnect Freedom,
> a wireless-enabled board based on the TI CC1352P7. The board exposes an
> MCU that can be attached to a host over USB, UART, SPI or I2C, and is
> described as a child node of the corresponding bus.
> 
> Signed-off-by: Ayush Singh <ayush@beagleboard.org>
> ---
>  .../beagle/beagle,beagleconnect-freedom.yaml       | 30 ++++++++++++++++++++++
>  MAINTAINERS                                        |  1 +
>  2 files changed, 31 insertions(+)
> 

Since there is going to be v2: please order patches correctly.

Please organize the patch documenting the compatible (DT bindings)
before the patch using that compatible.
See also:
https://elixir.bootlin.com/linux/v6.14-rc6/source/Documentation/devicetree/bindings/submitting-patches.rst#L46


> diff --git a/Documentation/devicetree/bindings/beagle/beagle,beagleconnect-freedom.yaml b/Documentation/devicetree/bindings/beagle/beagle,beagleconnect-freedom.yaml
> new file mode 100644
> index 000000000000..5a246f81261e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/beagle/beagle,beagleconnect-freedom.yaml
> @@ -0,0 +1,30 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/beagle/beagle,beagleconnect-freedom.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: BeagleBoard.org BeagleConnect Freedom
> +
> +description:
> +  The BeagleBoard.org BeagleConnect Freedom board connected over USB, UART, SPI or I2C.

Please wrap code according to the preferred limit expressed in Kernel
coding style (checkpatch is not a coding style description, but only a
tool).  However don't wrap blindly (see Kernel coding style).



Best regards,
Krzysztof