From mboxrd@z Thu Jan 1 00:00:00 1970 From: bugtrack@alsa-project.org Subject: [ALSA - driver 0002106]: Sound card snd-hda-intel emits NO sound Date: Fri, 12 May 2006 00:40:48 +0200 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from bugtrack.alsa-project.org (gate.perex.cz [85.132.177.35]) by alsa.jcu.cz (ALSA's E-mail Delivery System) with ESMTP id 60A4318F for ; Fri, 12 May 2006 00:40:48 +0200 (MEST) Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org A NOTE has been added to this issue. ====================================================================== ====================================================================== Reported By: louisvd Assigned To: tiwai ====================================================================== Project: ALSA - driver Issue ID: 2106 Category: PCI - hda-intel Reproducibility: always Severity: major Priority: normal Status: assigned Distribution: Fedora Core 5 Kernel Version: 2.6.16-1.2111_FC5smp ====================================================================== Date Submitted: 05-08-2006 21:00 CEST Last Modified: 05-12-2006 00:40 CEST ====================================================================== Summary: Sound card snd-hda-intel emits NO sound Description: Hi I was merrily running Fedora Core 4 and after upgrading the kernel to 2.6.16 my sound no longer worked under Linux (it works under Windows). After a lot of battling I figured I may as well upgrade to FC5 now. A clean install, out of the box, and the sound STILL did not work. I've applied every available patch to date and no luck. Tonight I installed the Alsa 1.0.11 driver, lib and util tarballs -- all installed successfully -- but there is STILL no sound produced. Everything LOOKS normal. There are no errors that I can detect. In the X and console versions of Alsamixer I have ALL the devices displayed and unmuted with the volumes at max. I've removed the sound lines from modprobe.conf and am running with alsasound and that didn't help either -- even though it says the driver has been loaded. FYI, the OSS Volume control calls it a Realtek ALC260. lspci refers to it as Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01). Please help. ====================================================================== ---------------------------------------------------------------------- louisvd - 05-10-06 20:02 ---------------------------------------------------------------------- OK then, so what must I do to fix the problem? The sound card is being activated by the supplied alsasound startup script in my init.d folder. If I run 'alsasound status' I'm told 'ALSA sound driver loaded.' As I mentioned, after nothing was working, I installed the ALSA driver, still nothing work, so then I removed the sound lines from modprobe.conf. It looks like this: alias eth0 tg3 alias scsi_hostadapter ata_piix Sadly there is still no sound. Do I need any sound stuff in there? Thanks for your time so far. I DO appreciate it. ---------------------------------------------------------------------- louisvd - 05-12-06 00:40 ---------------------------------------------------------------------- I see from below that the model is set to NULL and enable is set to N. 1. How do I make alsasound script set the model=auto? 2. Should enable=N? How do I make it set to Y? 3. I get no errors. The OS thinks the card had loaded. However, regardless of where the volume controls are, no sound plays. [root@vandyl init.d]# ls -l /sys/module/snd_hda_intel/parameters/ total 0 -r--r--r-- 1 root root 4096 May 12 00:37 enable -r--r--r-- 1 root root 4096 May 12 00:37 id -r--r--r-- 1 root root 4096 May 12 00:37 index -r--r--r-- 1 root root 4096 May 12 00:36 model -r--r--r-- 1 root root 4096 May 12 00:37 position_fix -r--r--r-- 1 root root 4096 May 12 00:37 probe_mask -r--r--r-- 1 root root 4096 May 12 00:37 single_cmd [root@vandyl init.d]# cat /sys/module/snd_hda_intel/parameters/enable N [root@vandyl init.d]# cat /sys/module/snd_hda_intel/parameters/id [root@vandyl init.d]# cat /sys/module/snd_hda_intel/parameters/index -1 [root@vandyl init.d]# cat /sys/module/snd_hda_intel/parameters/model [root@vandyl init.d]# cat /sys/module/snd_hda_intel/parameters/position_fix 0 [root@vandyl init.d]# cat /sys/module/snd_hda_intel/parameters/probe_mask -1 [root@vandyl init.d]# cat /sys/module/snd_hda_intel/parameters/single_cmd N Issue History Date Modified Username Field Change ====================================================================== 05-08-06 21:00 louisvd New Issue 05-08-06 21:00 louisvd Distribution => Fedora Core 5 05-08-06 21:00 louisvd Kernel Version => 2.6.16-1.2111_FC5smp 05-10-06 16:16 tiwai Note Added: 0009722 05-10-06 16:52 louisvd Note Added: 0009731 05-10-06 16:55 tiwai Note Added: 0009732 05-10-06 20:02 louisvd Note Added: 0009751 05-12-06 00:40 louisvd Note Added: 0009770 ====================================================================== ------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642