RE: UDA1341TS (iPAQ H3X00) sound driver for ALSA

[Kasparek Tomas <xkaspa06@stud.fee.vutbr.cz>]

On Fri, 12 Apr 2002, Hicks, Jamey wrote:

> > -----Original Message-----
> > From: Russell King - ARM Linux [mailto:linux@arm.linux.org.uk]
> > Subject: Re: UDA1341TS (iPAQ H3X00) sound driver for ALSA
> >
> > On Wed, Apr 10, 2002 at 09:55:43AM -0400, Hicks, Jamey wrote:
> > > > -----Original Message-----
> > > > From: Nicolas Pitre [mailto:nico@cam.org]
> > > >
> > > > No.  Please pick a relevant name.  H3600 is not the only
> > > > device with an UDA1341 out there.
> > >
> > > The alsa driver mentioned is iPAQ specific.  It would be useful to
> > > restructure it in the way the other SA11x0/UDA134x driver
> > is structured.
> >
> > I agree with Nico.  Nico is objecting to it being called
> > *h3600* when it
> > is for all iPAQs, ie, H3600, H3100, H3800.

This is right, I have thought about this.
>
> If that is the case, I am open to suggestions for the name should be, bearing in mind
> that not all iPAQ devices from Compaq are handheld devices.  h3xxx seems
> like a good choice at the moment, but I have a feeling we'll be sharing
> some of the same drivers with h4xxx in the near future.

I agree with "h3xxx". Jamey should say last word, because he should know
at best, what name is most descriptive both now and in (near) future.
I think h4xxx should be served with module named  h3xxx, or we should
vote for hxxxx :).

I have in mind, that the name will change, I'm just waiting for enough
opinions to do this work just once.

Bye

--

	Tomas Kasparek (sioux, xkaspa06)
 	 tomas.kasparek@[seznam.cz,volny.cz]
	 linux@fit.vutbr.cz
	student FIT VUT Brno