From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0000666]: Simply no sound ... no line ... no mixer
Date: Sun, 12 Dec 2004 00:58:53 +0100 [thread overview]
Message-ID: <a9bcdfbc7788e18d4cfd1194452337a1@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=666>
======================================================================
Reported By: footcow
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 666
Category: PCI - azx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian
Kernel Version: 2.6.9
======================================================================
Date Submitted: 11-23-2004 01:31 CET
Last Modified: 12-12-2004 00:58 CET
======================================================================
Summary: Simply no sound ... no line ... no mixer
Description:
I have compiled the last release : 1.0.7 stable.
But I do not have any sound, no line ... no mixer ... :(
I have an AsusTek P5GD2 motherboard with lspci -v :
0000:00:1b.0 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High
Definition Audio Controller (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 813d
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at cccf4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Capabilities: [70]
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=10 [0091]
The snd_azx module is well loaded :
lsmod :
snd_azx 30920 1
snd_pcm 95112 1 snd_azx
snd_timer 25476 1 snd_pcm
snd 54500 5 snd_azx,snd_pcm,snd_timer
snd_page_alloc 10120 1 snd_pcm
If I run alsamixer I get this :
$ alsamixer
No mixer elems found
If I run alsamixergui, I get 3 columns:
Line is emplty and can't change
Same for Mic
I can only move values for a third column called Capt.
======================================================================
----------------------------------------------------------------------
tiwai - 12-11-04 17:40
----------------------------------------------------------------------
The Oops with the Input is fixed in the very latest CVS.
There is no h/w playback volume on this codec chip!
To playback, make sure that you unmute the volume. Press 'M' on the
corresponding volume. "PCM" controls only the front output, BTW. It
should be "Front", but named as "PCM" because many apps prefer this name.
----------------------------------------------------------------------
footcow - 12-12-04 00:58
----------------------------------------------------------------------
I have applied the last CVS.
OK now no more Oops in Lines settings.
But sorry I miss understand what you mean here :
"To playback, make sure that you unmute the volume. Press 'M' on the
corresponding volume."
Under alsamixer ... Everything is unmute as you can see on my screenshot.
I send you a new one because with this last release I have two new choice
: Line-In As Surround and Mic As Center/LFE.
Also what you mean with :
"There is no h/w playback volume on this codec chip!"
???
No possibility to define the volume ??
I'm under KDE ... if I run Kmix in the output form I have nothing, in the
input form I have 2 capture option, and in the last option tab
(interuptors), I can see all the option I see with alsamix (PCM, Surround,
Centr, LFE etc.) ...
So I still have no sound output for the moment !
What can I give you to have more technical details ?
Issue History
Date Modified Username Field Change
======================================================================
11-23-04 01:31 footcow New Issue
11-23-04 01:31 footcow Distribution => Debian
11-23-04 01:31 footcow Kernel Version => 2.6.9
11-23-04 21:49 footcow Note Added: 0002530
12-08-04 19:54 tiwai Note Added: 0002791
12-08-04 23:56 footcow Note Added: 0002795
12-09-04 11:27 tiwai Note Added: 0002799
12-09-04 11:33 tiwai File Added: hda-query-fix.diff
12-09-04 11:34 tiwai Note Added: 0002800
12-09-04 12:11 tiwai Note Added: 0002801
12-09-04 12:12 tiwai File Added: hda-loopback-fix.diff
12-09-04 12:12 tiwai File Added: hda-proc-amp.diff
12-10-04 22:08 footcow Note Added: 0002808
12-10-04 22:08 footcow File Added: alsamix.png
12-11-04 17:40 tiwai Note Added: 0002811
12-12-04 00:58 footcow Note Added: 0002813
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
next reply other threads:[~2004-12-11 23:58 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-11 23:58 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-05-31 16:01 [ALSA - driver 0000666]: Simply no sound ... no line ... no mixer bugtrack
2005-01-19 16:14 bugtrack
2005-01-14 23:21 bugtrack
2005-01-11 15:14 bugtrack
2005-01-08 0:22 bugtrack
2005-01-07 17:04 bugtrack
2005-01-06 23:44 bugtrack
2004-12-16 20:06 bugtrack
2004-12-16 17:32 bugtrack
2004-12-11 16:40 bugtrack
2004-12-10 21:08 bugtrack
2004-12-09 11:11 bugtrack
2004-12-09 10:34 bugtrack
2004-12-09 10:27 bugtrack
2004-12-08 22:56 bugtrack
2004-12-08 18:54 bugtrack
2004-11-23 20:49 bugtrack
2004-11-23 0:31 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a9bcdfbc7788e18d4cfd1194452337a1@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.