From: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: tomm.merciai@gmail.com, linux-renesas-soc@vger.kernel.org,
linux-media@vger.kernel.org, biju.das.jz@bp.renesas.com,
prabhakar.mahadev-lad.rj@bp.renesas.com,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7 00/17] media: rzg2l-cru: Add support for RZ/G3E (CSI2, CRU)
Date: Tue, 22 Apr 2025 09:24:05 +0200 [thread overview]
Message-ID: <aAdEFfWcTUC0DvYU@tom-desktop> (raw)
In-Reply-To: <20250421151108.GB19213@pendragon.ideasonboard.com>
Hi Laurent,
Thanks for your review.
On Mon, Apr 21, 2025 at 06:11:08PM +0300, Laurent Pinchart wrote:
> Hi Tommaso,
>
> Thank you for the patches.
>
> On Fri, Apr 11, 2025 at 07:05:28PM +0200, Tommaso Merciai wrote:
> > Dear All,
> >
> > In preparation of supporting the CRU/CSI2 IPs found into the Renesas RZ/G3E
> > SoC, this series adds driver/dt-bindings support.
> > This adds also some minor fixes into rzg2l-csi2 and rzg2l-core drivers.
> >
> > The series was tested in an out of tree branch with the following hw pipeline:
> >
> > ov5645 image sensor (Coral Camera) -> rzg3e CSI2 -> rzg3e CRU
> > imx219 image sensor (Pi PiNoir Camera Module V2.1) -> rzg3e CSI2 -> rzg3e CRU
> >
> > base commit: 7702d0130dc00 (tag: next-20250408)
>
> As far as I can tell, the series has been fully reviewed. I'll collect
> the patches, run them through CI, and then send a pull request.
>
> > ------
> > Some logs:
> >
> > root@smarc-rzg3e:~# media-ctl -p
> > Media controller API version 6.15.0
> >
> > Media device information
> > ------------------------
> > driver rzg2l_cru
> > model renesas,r9a09g047-cru
> > serial
> > bus info platform:16000000.video
> > hw revision 0x0
> > driver version 6.15.0
> >
> > Device topology
> > - entity 1: csi-16000400.csi2 (2 pads, 2 links, 0 routes)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev0
> > pad0: Sink
> > [stream:0 fmt:UYVY8_1X16/1280x960 field:none colorspace:srgb]
> > <- "ov5645 0-003c":0 [ENABLED,IMMUTABLE]
> > pad1: Source
> > [stream:0 fmt:UYVY8_1X16/1280x960 field:none colorspace:srgb]
> > -> "cru-ip-16000000.video":0 [ENABLED,IMMUTABLE]
> >
> > - entity 4: cru-ip-16000000.video (2 pads, 2 links, 0 routes)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev1
> > pad0: Sink
> > [stream:0 fmt:UYVY8_1X16/1280x960 field:none]
> > <- "csi-16000400.csi2":1 [ENABLED,IMMUTABLE]
> > pad1: Source
> > [stream:0 fmt:UYVY8_1X16/1280x960 field:none]
> > -> "CRU output":0 [ENABLED,IMMUTABLE]
> >
> > - entity 7: ov5645 0-003c (1 pad, 1 link, 0 routes)
> > type V4L2 subdev subtype Sensor flags 0
> > device node name /dev/v4l-subdev2
> > pad0: Source
> > [stream:0 fmt:UYVY8_1X16/1280x960 field:none colorspace:srgb
> > crop:(0,0)/1280x960]
> > -> "csi-16000400.csi2":0 [ENABLED,IMMUTABLE]
> >
> > - entity 17: CRU output (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video0
> > pad0: Sink
> > <- "cru-ip-16000000.video":1 [ENABLED,IMMUTABLE]
> >
> > root@smarc-rzg3e:~# v4l2-compliance -d /dev/v4l-subdev0
>
> For the next submission, you can use
>
> $ v4l2-compliance -m /dev/media0
>
> to test all subdevs and video nodes.
Will do. Thanks for sharing this.
Thanks & Regards,
Tommaso
>
> > v4l2-compliance 1.26.1-5142, 64 bits, 64-bit time_t
> > v4l2-compliance SHA: 4aee01a02792 2023-12-12 21:40:38
> >
> > Compliance test for device /dev/v4l-subdev0:
> >
> > Driver Info:
> > Driver version : 6.15.0
> > Capabilities : 0x00[ 580.151532] csi-16000400.csi2: ================= START STATUS =================
> > 000000
> >
> > Requir[ 580.151532] csi-16000400.csi2: ================= START STATUS =================
> > ed ioctls:
> > tes[ 580.168711] csi-16000400.csi2: ================== END STATUS ==================
> > t VIDIOC_SUDBEV_[ 580.168711] csi-16000400.csi2: ================== END STATUS ==================
> > QUERYCAP: OK
> > test invalid ioctls: OK
> >
> > Allow for multiple opens:
> > test second /dev/v4l-subdev0 open: OK
> > test VIDIOC_SUBDEV_QUERYCAP: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> > test VIDIOC_QUERYCTRL: OK (Not Supported)
> > test VIDIOC_G/S_CTRL: OK (Not Supported)
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 0 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK (Not Supported)
> > test VIDIOC_TRY_FMT: OK (Not Supported)
> > test VIDIOC_S_FMT: OK (Not Supported)
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> > test CREATE_BUFS maximum buffers: OK
> > test VIDIOC_EXPBUF: OK (Not Supported)
> > test Requests: OK (Not Supported)
> >
> > Total for device /dev/v4l-subdev0: 44, Succeeded: 44, Failed: 0, Warnings: 0
> >
> > root@smarc-rzg3e:~# v4l2-compliance -d /dev/v4l-subdev1
> > v4l2-compliance 1.26.1-5142, 64 [ 592.022784] cru-ip-16000000.video: ================= START STATUS =================
> > bits, 64-bit tim[ 592.022784] cru-ip-16000000.video: ================= START STATUS =================
> > e_t
> > v4l2-compli[ 592.040565] cru-ip-16000000.video: ================== END STATUS ==================
> > ance SHA: 4aee01[ 592.040565] cru-ip-16000000.video: ================== END STATUS ==================
> > a02792 2023-12-12 21:40:38
> >
> > Compliance test for rzg2l_cru device /dev/v4l-subdev1:
> >
> > Driver Info:
> > Driver version : 6.15.0
> > Capabilities : 0x00000000
> > Media Driver Info:
> > Driver name : rzg2l_cru
> > Model : renesas,r9a09g047-cru
> > Serial :
> > Bus info : platform:16000000.video
> > Media version : 6.15.0
> > Hardware revision: 0x00000000 (0)
> > Driver version : 6.15.0
> > Interface Info:
> > ID : 0x0300000d
> > Type : V4L Sub-Device
> > Entity Info:
> > ID : 0x00000004 (4)
> > Name : cru-ip-16000000.video
> > Function : Video Pixel Formatter
> > Pad 0x01000005 : 0: Sink, Must Connect
> > Link 0x02000015: from remote pad 0x1000003 of entity 'csi-16000400.csi2' (Video Interface Bridge): Data, Enabled, Immutable
> > Pad 0x01000006 : 1: Source, Must Connect
> > Link 0x02000017: to remote pad 0x1000012 of entity 'CRU output' (V4L2 I/O): Data, Enabled, Immutable
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> > test VIDIOC_SUDBEV_QUERYCAP: OK
> > test invalid ioctls: OK
> >
> > Allow for multiple opens:
> > test second /dev/v4l-subdev1 open: OK
> > test VIDIOC_SUBDEV_QUERYCAP: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Sub-Device ioctls (Sink Pad 0):
> > Try Stream 0
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > Active Stream 0
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 1):
> > Try Stream 0
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > Active Stream 0
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> > test VIDIOC_QUERYCTRL: OK (Not Supported)
> > test VIDIOC_G/S_CTRL: OK (Not Supported)
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 0 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK (Not Supported)
> > test VIDIOC_TRY_FMT: OK (Not Supported)
> > test VIDIOC_S_FMT: OK (Not Supported)
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> > test CREATE_BUFS maximum buffers: OK
> > test VIDIOC_EXPBUF: OK (Not Supported)
> > test Requests: OK (Not Supported)
> >
> > Total for rzg2l_cru device /dev/v4l-subdev1: 59, Succeeded: 59, Failed: 0, Warnings: 0
> >
> > root@smarc-rzg3e:~# v4l2-compliance -d /dev/v4l-subdev2
> > v4l2-compliance 1.26.1-5142, 64 [ 602.158977] ov5645 0-003c: ================= START STATUS =================
> > bits, 64-bit tim[ 602.158977] ov5645 0-003c: ================= START STATUS =================
> > e_t
> > v4l2-compli[ 602.175529] ov5645 0-003c: ================== END STATUS ==================
> > ance SHA: 4aee01[ 602.175529] ov5645 0-003c: ================== END STATUS ==================
> > a02792 2023-12-12 21:40:38
> >
> > Compliance test for device /dev/v4l-subdev2:
> >
> > Driver Info:
> > Driver version : 6.15.0
> > Capabilities : 0x00000000
> >
> > Required ioctls:
> > test VIDIOC_SUDBEV_QUERYCAP: OK
> > test invalid ioctls: OK
> >
> > Allow for multiple opens:
> > test second /dev/v4l-subdev2 open: OK
> > test VIDIOC_SUBDEV_QUERYCAP: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > test VIDIOC_QUERYCTRL: OK
> > test VIDIOC_G/S_CTRL: OK
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 12 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK (Not Supported)
> > test VIDIOC_TRY_FMT: OK (Not Supported)
> > test VIDIOC_S_FMT: OK (Not Supported)
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> > test CREATE_BUFS maximum buffers: OK
> > test VIDIOC_EXPBUF: OK (Not Supported)
> > test Requests: OK (Not Supported)
> >
> > Total for device /dev/v4l-subdev2: 44, Succeeded: 44, Failed: 0, Warnings: 0
> >
> > Thanks & Regards,
> > Tommaso
> >
> > Lad Prabhakar (12):
> > media: dt-bindings: renesas,rzg2l-csi2: Document Renesas RZ/V2H(P) SoC
> > media: rzg2l-cru: csi2: Use local variable for struct device in
> > rzg2l_csi2_probe()
> > media: rzg2l-cru: rzg2l-core: Use local variable for struct device in
> > rzg2l_cru_probe()
> > media: rzg2l-cru: csi2: Introduce SoC-specific D-PHY handling
> > media: rzg2l-cru: csi2: Add support for RZ/V2H(P) SoC
> > media: rzg2l-cru: Add register mapping support
> > media: rzg2l-cru: Pass resolution limits via OF data
> > media: rzg2l-cru: Add image_conv offset to OF data
> > media: rzg2l-cru: Add IRQ handler to OF data
> > media: rzg2l-cru: Add function pointer to check if FIFO is empty
> > media: rzg2l-cru: Add function pointer to configure CSI
> > media: rzg2l-cru: Add support for RZ/G3E SoC
> >
> > Tommaso Merciai (5):
> > media: dt-bindings: renesas,rzg2l-csi2: Document Renesas RZ/G3E CSI-2
> > block
> > media: dt-bindings: renesas,rzg2l-cru: Document Renesas RZ/G3E SoC
> > media: rzg2l-cru: csi2: Use devm_pm_runtime_enable()
> > media: rzg2l-cru: rzg2l-core: Use devm_pm_runtime_enable()
> > media: rzg2l-cru: csi2: Skip system clock for RZ/V2H(P) SoC
> >
> > .../bindings/media/renesas,rzg2l-cru.yaml | 65 +++-
> > .../bindings/media/renesas,rzg2l-csi2.yaml | 62 +++-
> > .../platform/renesas/rzg2l-cru/rzg2l-core.c | 139 ++++++++-
> > .../renesas/rzg2l-cru/rzg2l-cru-regs.h | 91 ++++--
> > .../platform/renesas/rzg2l-cru/rzg2l-cru.h | 39 ++-
> > .../platform/renesas/rzg2l-cru/rzg2l-csi2.c | 165 ++++++++--
> > .../platform/renesas/rzg2l-cru/rzg2l-ip.c | 13 +-
> > .../platform/renesas/rzg2l-cru/rzg2l-video.c | 295 ++++++++++++++++--
> > 8 files changed, 737 insertions(+), 132 deletions(-)
>
> --
> Regards,
>
> Laurent Pinchart
prev parent reply other threads:[~2025-04-22 7:24 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-11 17:05 [PATCH v7 00/17] media: rzg2l-cru: Add support for RZ/G3E (CSI2, CRU) Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 01/17] media: dt-bindings: renesas,rzg2l-csi2: Document Renesas RZ/V2H(P) SoC Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 02/17] media: dt-bindings: renesas,rzg2l-csi2: Document Renesas RZ/G3E CSI-2 block Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 03/17] media: dt-bindings: renesas,rzg2l-cru: Document Renesas RZ/G3E SoC Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 04/17] media: rzg2l-cru: csi2: Use local variable for struct device in rzg2l_csi2_probe() Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 05/17] media: rzg2l-cru: csi2: Use devm_pm_runtime_enable() Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 06/17] media: rzg2l-cru: rzg2l-core: Use local variable for struct device in rzg2l_cru_probe() Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 07/17] media: rzg2l-cru: rzg2l-core: Use devm_pm_runtime_enable() Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 08/17] media: rzg2l-cru: csi2: Introduce SoC-specific D-PHY handling Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 09/17] media: rzg2l-cru: csi2: Skip system clock for RZ/V2H(P) SoC Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 10/17] media: rzg2l-cru: csi2: Add support " Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 11/17] media: rzg2l-cru: Add register mapping support Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 12/17] media: rzg2l-cru: Pass resolution limits via OF data Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 13/17] media: rzg2l-cru: Add image_conv offset to " Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 14/17] media: rzg2l-cru: Add IRQ handler " Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 15/17] media: rzg2l-cru: Add function pointer to check if FIFO is empty Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 16/17] media: rzg2l-cru: Add function pointer to configure CSI Tommaso Merciai
2025-04-11 17:05 ` [PATCH v7 17/17] media: rzg2l-cru: Add support for RZ/G3E SoC Tommaso Merciai
2025-04-14 7:40 ` [PATCH v7 00/17] media: rzg2l-cru: Add support for RZ/G3E (CSI2, CRU) Geert Uytterhoeven
2025-04-14 7:49 ` Tommaso Merciai
2025-04-21 15:11 ` Laurent Pinchart
2025-04-22 7:24 ` Tommaso Merciai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aAdEFfWcTUC0DvYU@tom-desktop \
--to=tommaso.merciai.xr@bp.renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=krzk+dt@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mchehab@kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh@kernel.org \
--cc=tomm.merciai@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.