All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: Mehdi Djait <mehdi.djait@linux.intel.com>
Cc: laurent.pinchart@ideasonboard.com,
	tomi.valkeinen@ideasonboard.com, jacopo.mondi@ideasonboard.com,
	hverkuil@xs4all.nl, kieran.bingham@ideasonboard.com,
	naush@raspberrypi.com, mchehab@kernel.org, hdegoede@redhat.com,
	dave.stevenson@raspberrypi.com, linux-media@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH v2] media: v4l2-common: Add a helper for obtaining the clock producer
Date: Sat, 10 May 2025 12:56:02 +0000	[thread overview]
Message-ID: <aB9M4jUsGA9YAkSm@kekkonen.localdomain> (raw)
In-Reply-To: <20250310122305.209534-1-mehdi.djait@linux.intel.com>

Hi Mehdi,

On Mon, Mar 10, 2025 at 01:23:05PM +0100, Mehdi Djait wrote:
> Introduce a helper for v4l2 sensor drivers on both DT- and ACPI-based
> platforms to retrieve a reference to the clock producer from firmware.
> 
> This helper behaves the same as clk_get_optional() except where there is
> no clock producer like ACPI-based platforms.
> 
> For ACPI-based platforms the function will read the "clock-frequency"
> ACPI _DSD property and register a fixed frequency clock with the frequency
> indicated in the property.
> 
> Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
> ---
> Link for discussion (where this patch was proposed): https://lore.kernel.org/linux-media/20250220154909.152538-1-mehdi.djait@linux.intel.com/
> 
> v1 -> v2:
> Suggested by Sakari:
>     - removed clk_name
>     - removed the IS_ERR() check
>     - improved the kernel-doc comment and commit msg
> Link for v1: https://lore.kernel.org/linux-media/20250227092643.113939-1-mehdi.djait@linux.intel.com
> 
>  drivers/media/v4l2-core/v4l2-common.c | 35 +++++++++++++++++++++++++++
>  include/media/v4l2-common.h           | 18 ++++++++++++++
>  2 files changed, 53 insertions(+)
> 
> diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
> index 0a2f4f0d0a07..99d826acb213 100644
> --- a/drivers/media/v4l2-core/v4l2-common.c
> +++ b/drivers/media/v4l2-core/v4l2-common.c
> @@ -34,6 +34,9 @@
>   * Added Gerd Knorrs v4l1 enhancements (Justin Schoeman)
>   */
>  
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
>  #include <linux/module.h>
>  #include <linux/types.h>
>  #include <linux/kernel.h>
> @@ -636,3 +639,35 @@ int v4l2_link_freq_to_bitmap(struct device *dev, const u64 *fw_link_freqs,
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(v4l2_link_freq_to_bitmap);
> +
> +struct clk *devm_v4l2_sensor_clk_get(struct device *dev, const char *id)
> +{
> +	struct clk_hw *clk_hw;
> +	struct clk *clk;
> +	u32 rate;
> +	int ret;
> +
> +	clk = devm_clk_get_optional(dev, id);
> +	if (clk)
> +		return clk;
> +
> +	if (!is_acpi_node(dev_fwnode(dev)))
> +		return ERR_PTR(-ENOENT);
> +
> +	ret = device_property_read_u32(dev, "clock-frequency", &rate);
> +	if (ret)
> +		return ERR_PTR(ret);
> +
> +	if (!id) {
> +		id = devm_kasprintf(dev, GFP_KERNEL, "clk-%s", dev_name(dev));
> +		if (!id)
> +			return ERR_PTR(-ENOMEM);
> +	}
> +
> +	clk_hw = devm_clk_hw_register_fixed_rate(dev, id, NULL, 0, rate);

devm_clk_hw_register_fixed_rate() is only available when COMMON_CLK is
enabled. You need #ifdefs here. In practice without CCF only
devm_clk_get_optional() is useful I guess.

Another question is then how commonly COMMON_CLK is enabled e.g. on x86
systems. At least Debian kernel has it. Presumably it's common elsewhere,
too.

> +	if (IS_ERR(clk_hw))
> +		return ERR_CAST(clk_hw);
> +
> +	return clk_hw->clk;
> +}
> +EXPORT_SYMBOL_GPL(devm_v4l2_sensor_clk_get);
> diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
> index 63ad36f04f72..35b9ac698e8a 100644
> --- a/include/media/v4l2-common.h
> +++ b/include/media/v4l2-common.h
> @@ -573,6 +573,24 @@ int v4l2_link_freq_to_bitmap(struct device *dev, const u64 *fw_link_freqs,
>  			     unsigned int num_of_driver_link_freqs,
>  			     unsigned long *bitmap);
>  
> +/**
> + * devm_v4l2_sensor_clk_get - lookup and obtain a reference to an optional clock
> + *			      producer for a camera sensor.
> + *
> + * @dev: device for v4l2 sensor clock "consumer"
> + * @id: clock consumer ID
> + *
> + * This function behaves the same way as clk_get_optional() except where there
> + * is no clock producer like in ACPI-based platforms.
> + * For ACPI-based platforms, the function will read the "clock-frequency"
> + * ACPI _DSD property and register a fixed-clock with the frequency indicated
> + * in the property.
> + *
> + * Return:
> + * * pointer to a struct clk on success or an error code on failure.
> + */
> +struct clk *devm_v4l2_sensor_clk_get(struct device *dev, const char *id);
> +
>  static inline u64 v4l2_buffer_get_timestamp(const struct v4l2_buffer *buf)
>  {
>  	/*

-- 
Regards,

Sakari Ailus

  parent reply	other threads:[~2025-05-10 12:56 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-10 12:23 [RFC PATCH v2] media: v4l2-common: Add a helper for obtaining the clock producer Mehdi Djait
2025-03-11 14:51 ` kernel test robot
2025-03-11 16:46 ` kernel test robot
2025-05-10 12:56 ` Sakari Ailus [this message]
2025-05-12  8:21   ` Mehdi Djait
2025-05-12 15:41     ` Sakari Ailus
2025-05-14 11:43       ` Mehdi Djait

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aB9M4jUsGA9YAkSm@kekkonen.localdomain \
    --to=sakari.ailus@linux.intel.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=hdegoede@redhat.com \
    --cc=hverkuil@xs4all.nl \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mehdi.djait@linux.intel.com \
    --cc=naush@raspberrypi.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.