Re: [PATCH] ARM: dts: bananapi: add support for PHY LEDs

[Michael Klein <michael@fossekall.de>]

On Thu, May 08, 2025 at 12:45:28AM +0900, Chen-Yu Tsai wrote:
>On Wed, May 7, 2025 at 4:56 AM Michael Klein <michael@fossekall.de> wrote:
>>
>> The Bananapi M1 has three LEDs connected to the RTL8211E ethernet PHY.
>> Add the corresponding nodes to the device tree.
>
>I see from old emails that this was supposed to be updated? And if you
>didn't, then his patch should be marked as a "RESEND", so tooling doesn't
>get confused and ignore it.

Thank you for the reminder. Yes, the commit message was supposed to be 
updated. I'll follow up.

Michael

>I'll wait a couple days in case anyone else wants to take a look.
>
>ChenYu
>
>> Signed-off-by: Michael Klein <michael@fossekall.de>
>> ---
>>  .../boot/dts/allwinner/sun7i-a20-bananapi.dts | 27 +++++++++++++++++++
>>  1 file changed, 27 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
>> index 46ecf9db2324..d8b362c9661a 100644
>> --- a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
>> +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
>> @@ -48,6 +48,7 @@
>>
>>  #include <dt-bindings/gpio/gpio.h>
>>  #include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/leds/common.h>
>>
>>  / {
>>         model = "LeMaker Banana Pi";
>> @@ -169,6 +170,32 @@ &ir0 {
>>  &gmac_mdio {
>>         phy1: ethernet-phy@1 {
>>                 reg = <1>;
>> +
>> +               leds {
>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +
>> +                       led@0 {
>> +                               reg = <0>;
>> +                               color = <LED_COLOR_ID_GREEN>;
>> +                               function = LED_FUNCTION_LAN;
>> +                               linux,default-trigger = "netdev";
>> +                       };
>> +
>> +                       led@1 {
>> +                               reg = <1>;
>> +                               color = <LED_COLOR_ID_AMBER>;
>> +                               function = LED_FUNCTION_LAN;
>> +                               linux,default-trigger = "netdev";
>> +                       };
>> +
>> +                       led@2 {
>> +                               reg = <2>;
>> +                               color = <LED_COLOR_ID_BLUE>;
>> +                               function = LED_FUNCTION_LAN;
>> +                               linux,default-trigger = "netdev";
>> +                       };
>> +               };
>>         };
>>  };
>>
>> --
>> 2.39.5
>>
>>
>

--