Re: [PATCH net-next v4] selftests/vsock: add initial vmtest.sh for vsock

[Bobby Eshleman <bobbyeshleman@gmail.com>]

On Tue, May 13, 2025 at 12:08:48PM +0200, Paolo Abeni wrote:
> On 5/8/25 3:23 AM, Bobby Eshleman wrote:
> > This commit introduces a new vmtest.sh runner for vsock.
> > 
> > It uses virtme-ng/qemu to run tests in a VM. The tests validate G2H,
> > H2G, and loopback. The testing tools from tools/testing/vsock/ are
> > reused. Currently, only vsock_test is used.
> > 
> > VMCI and hyperv support is automatically built, though not used.
> > 
> > Only tested on x86.
> > 
> > To run:
> > 
> >   $ tools/testing/selftests/vsock/vmtest.sh
> > 
> > or
> > 
> >   $ make -C tools/testing/selftests TARGETS=vsock run_tests
> > 
> > Output (vmtest.sh):
> > TAP version 13
> > 1..3
> > not ok 1 vm_server_host_client # exit=1
> > ok 1 vm_client_host_server
> > ok 2 vm_loopback
> > SUMMARY: PASS=2 SKIP=0 FAIL=1
> > 1..3
> > 
> > Future work can include vsock_diag_test.
> > 
> > The tap output style copies mm's run_vmtests.sh.
> > 
> > Because vsock requires a VM to test anything other than loopback, this
> > patch adds vmtest.sh as a kselftest itself. This is different than other
> > systems that have a "vmtest.sh", where it is used as a utility script to
> > spin up a VM to run the selftests as a guest (but isn't hooked into
> > kselftest).
> > 
> > I've began testing this in one of the NIPA environments Jakub as
> > graciously provided. I would expect at least one more revision to have
> > that setup ironed out and fully tested.
> > 
> > Signed-off-by: Bobby Eshleman <bobbyeshleman@gmail.com>
> > ---
> > Changes in v4:
> > - do not use special tab delimiter for help string parsing (Stefano + Paolo)
> > - fix paths for when installing kselftest and running out-of-tree (Paolo)
> > - change vng to using running kernel instead of compiled kernel (Paolo)
> > - use multi-line string for QEMU_OPTS (Stefano)
> > - change timeout to 300s (Paolo)
> > - skip if tools are not found and use kselftests status codes (Paolo)
> > - remove build from vmtest.sh (Paolo)
> > - change 2222 -> SSH_HOST_PORT (Stefano)
> > - add tap-format output
> > - add vmtest.log to gitignore
> > - check for vsock_test binary and remind user to build it if missing
> > - create a proper build in makefile
> > - style fixes
> > - add ssh, timeout, and pkill to dependency check, just in case
> > - fix numerical comparison in conditionals
> > - check qemu pidfile exists before proceeding (avoid wasting time waiting for ssh)
> > - fix tracking of pass/fail bug
> > - fix stderr redirection bug
> > - Link to v3: https://lore.kernel.org/r/20250428-vsock-vmtest-v3-1-181af6163f3e@gmail.com
> > 
> > Changes in v3:
> > - use common conditional syntax for checking variables
> > - use return value instead of global rc
> > - fix typo TEST_HOST_LISTENER_PORT -> TEST_HOST_PORT_LISTENER
> > - use SIGTERM instead of SIGKILL on cleanup
> > - use peer-cid=1 for loopback
> > - change sleep delay times into globals
> > - fix test_vm_loopback logging
> > - add test selection in arguments
> > - make QEMU an argument
> > - check that vng binary is on path
> > - use QEMU variable
> > - change <tab><backslash> to <space><backslash>
> > - fix hardcoded file paths
> > - add comment in commit msg about script that vmtest.sh was based off of
> > - Add tools/testing/selftest/vsock/Makefile for kselftest
> > - Link to v2: https://lore.kernel.org/r/20250417-vsock-vmtest-v2-1-3901a27331e8@gmail.com
> > 
> > Changes in v2:
> > - add kernel oops and warnings checker
> > - change testname variable to use FUNCNAME
> > - fix spacing in test_vm_server_host_client
> > - add -s skip build option to vmtest.sh
> > - add test_vm_loopback
> > - pass port to vm_wait_for_listener
> > - fix indentation in vmtest.sh
> > - add vmci and hyperv to config
> > - changed whitespace from tabs to spaces in help string
> > - Link to v1: https://lore.kernel.org/r/20250410-vsock-vmtest-v1-1-f35a81dab98c@gmail.com
> > ---
> >  MAINTAINERS                              |   1 +
> >  tools/testing/selftests/vsock/.gitignore |   2 +
> >  tools/testing/selftests/vsock/Makefile   |  17 ++
> >  tools/testing/selftests/vsock/config     | 114 +++++++++
> >  tools/testing/selftests/vsock/settings   |   1 +
> >  tools/testing/selftests/vsock/vmtest.sh  | 423 +++++++++++++++++++++++++++++++
> >  6 files changed, 558 insertions(+)
> > 
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 657a67f9031e..3fbdd7bbfce7 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -25751,6 +25751,7 @@ F:	include/uapi/linux/vm_sockets.h
> >  F:	include/uapi/linux/vm_sockets_diag.h
> >  F:	include/uapi/linux/vsockmon.h
> >  F:	net/vmw_vsock/
> > +F:	tools/testing/selftests/vsock/
> >  F:	tools/testing/vsock/
> >  
> >  VMALLOC
> > diff --git a/tools/testing/selftests/vsock/.gitignore b/tools/testing/selftests/vsock/.gitignore
> > new file mode 100644
> > index 000000000000..9c5bf379480f
> > --- /dev/null
> > +++ b/tools/testing/selftests/vsock/.gitignore
> > @@ -0,0 +1,2 @@
> > +vmtest.log
> > +vsock_test
> > diff --git a/tools/testing/selftests/vsock/Makefile b/tools/testing/selftests/vsock/Makefile
> > new file mode 100644
> > index 000000000000..71fca0a2b8da
> > --- /dev/null
> > +++ b/tools/testing/selftests/vsock/Makefile
> > @@ -0,0 +1,17 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +
> > +CURDIR := $(abspath .)
> > +TOOLSDIR := $(abspath ../../..)
> > +
> > +$(OUTPUT)/vsock_test: $(TOOLSDIR)/testing/vsock/vsock_test
> > +	install -m 755 $< $@
> > +
> > +$(TOOLSDIR)/testing/vsock/vsock_test:
> > +	$(MAKE) -C $(TOOLSDIR)/testing/vsock vsock_test
> > +
> > +TEST_PROGS += vmtest.sh
> > +EXTRA_CLEAN += vmtest.log
> > +TEST_GEN_FILES := vsock_test
> > +
> > +include ../lib.mk
> > +
> > diff --git a/tools/testing/selftests/vsock/config b/tools/testing/selftests/vsock/config
> > new file mode 100644
> > index 000000000000..3bffaaf98fff
> > --- /dev/null
> > +++ b/tools/testing/selftests/vsock/config
> > @@ -0,0 +1,114 @@
> > +CONFIG_BLK_DEV_INITRD=y
> > +CONFIG_BPF=y
> > +CONFIG_BPF_SYSCALL=y
> > +CONFIG_BPF_JIT=y
> > +CONFIG_HAVE_EBPF_JIT=y
> > +CONFIG_BPF_EVENTS=y
> > +CONFIG_FTRACE_SYSCALLS=y
> > +CONFIG_FUNCTION_TRACER=y
> > +CONFIG_HAVE_DYNAMIC_FTRACE=y
> > +CONFIG_DYNAMIC_FTRACE=y
> > +CONFIG_HAVE_KPROBES=y
> > +CONFIG_KPROBES=y
> > +CONFIG_KPROBE_EVENTS=y
> > +CONFIG_ARCH_SUPPORTS_UPROBES=y
> > +CONFIG_UPROBES=y
> > +CONFIG_UPROBE_EVENTS=y
> > +CONFIG_DEBUG_FS=y
> > +CONFIG_FW_CFG_SYSFS=y
> > +CONFIG_FW_CFG_SYSFS_CMDLINE=y
> > +CONFIG_DRM=y
> > +CONFIG_DRM_VIRTIO_GPU=y
> > +CONFIG_DRM_VIRTIO_GPU_KMS=y
> > +CONFIG_DRM_BOCHS=y
> > +CONFIG_VIRTIO_IOMMU=y
> > +CONFIG_SOUND=y
> > +CONFIG_SND=y
> > +CONFIG_SND_SEQUENCER=y
> > +CONFIG_SND_PCI=y
> > +CONFIG_SND_INTEL8X0=y
> > +CONFIG_SND_HDA_CODEC_REALTEK=y
> > +CONFIG_SECURITYFS=y
> > +CONFIG_CGROUP_BPF=y
> > +CONFIG_SQUASHFS=y
> > +CONFIG_SQUASHFS_XZ=y
> > +CONFIG_SQUASHFS_ZSTD=y
> > +CONFIG_FUSE_FS=y
> > +CONFIG_SERIO=y
> > +CONFIG_PCI=y
> > +CONFIG_INPUT=y
> > +CONFIG_INPUT_KEYBOARD=y
> > +CONFIG_KEYBOARD_ATKBD=y
> > +CONFIG_SERIAL_8250=y
> > +CONFIG_SERIAL_8250_CONSOLE=y
> > +CONFIG_X86_VERBOSE_BOOTUP=y
> > +CONFIG_VGA_CONSOLE=y
> > +CONFIG_FB=y
> > +CONFIG_FB_VESA=y
> > +CONFIG_FRAMEBUFFER_CONSOLE=y
> > +CONFIG_RTC_CLASS=y
> > +CONFIG_RTC_HCTOSYS=y
> > +CONFIG_RTC_DRV_CMOS=y
> > +CONFIG_HYPERVISOR_GUEST=y
> > +CONFIG_PARAVIRT=y
> > +CONFIG_KVM_GUEST=y
> > +CONFIG_KVM=y
> > +CONFIG_KVM_INTEL=y
> > +CONFIG_KVM_AMD=y
> > +CONFIG_VSOCKETS=y
> > +CONFIG_VSOCKETS_DIAG=y
> > +CONFIG_VSOCKETS_LOOPBACK=y
> > +CONFIG_VMWARE_VMCI_VSOCKETS=y
> > +CONFIG_VIRTIO_VSOCKETS=y
> > +CONFIG_VIRTIO_VSOCKETS_COMMON=y
> > +CONFIG_HYPERV_VSOCKETS=y
> > +CONFIG_VMWARE_VMCI=y
> > +CONFIG_VHOST_VSOCK=y
> > +CONFIG_HYPERV=y
> > +CONFIG_UEVENT_HELPER=n
> > +CONFIG_VIRTIO=y
> > +CONFIG_VIRTIO_PCI=y
> > +CONFIG_VIRTIO_MMIO=y
> > +CONFIG_VIRTIO_BALLOON=y
> > +CONFIG_NET=y
> > +CONFIG_NET_CORE=y
> > +CONFIG_NETDEVICES=y
> > +CONFIG_NETWORK_FILESYSTEMS=y
> > +CONFIG_INET=y
> > +CONFIG_NET_9P=y
> > +CONFIG_NET_9P_VIRTIO=y
> > +CONFIG_9P_FS=y
> > +CONFIG_VIRTIO_NET=y
> > +CONFIG_CMDLINE_OVERRIDE=n
> > +CONFIG_BINFMT_SCRIPT=y
> > +CONFIG_SHMEM=y
> > +CONFIG_TMPFS=y
> > +CONFIG_UNIX=y
> > +CONFIG_MODULE_SIG_FORCE=n
> > +CONFIG_DEVTMPFS=y
> > +CONFIG_TTY=y
> > +CONFIG_VT=y
> > +CONFIG_UNIX98_PTYS=y
> > +CONFIG_EARLY_PRINTK=y
> > +CONFIG_INOTIFY_USER=y
> > +CONFIG_BLOCK=y
> > +CONFIG_SCSI_LOWLEVEL=y
> > +CONFIG_SCSI=y
> > +CONFIG_SCSI_VIRTIO=y
> > +CONFIG_BLK_DEV_SD=y
> > +CONFIG_VIRTIO_CONSOLE=y
> > +CONFIG_WATCHDOG=y
> > +CONFIG_WATCHDOG_CORE=y
> > +CONFIG_I6300ESB_WDT=y
> > +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
> > +CONFIG_OVERLAY_FS=y
> > +CONFIG_DAX=y
> > +CONFIG_DAX_DRIVER=y
> > +CONFIG_FS_DAX=y
> > +CONFIG_MEMORY_HOTPLUG=y
> > +CONFIG_MEMORY_HOTREMOVE=y
> > +CONFIG_ZONE_DEVICE=y
> > +CONFIG_FUSE_FS=y
> > +CONFIG_VIRTIO_FS=y
> > +CONFIG_VSOCKETS=y
> > +CONFIG_VIRTIO_VSOCKETS=y
> > diff --git a/tools/testing/selftests/vsock/settings b/tools/testing/selftests/vsock/settings
> > new file mode 100644
> > index 000000000000..694d70710ff0
> > --- /dev/null
> > +++ b/tools/testing/selftests/vsock/settings
> > @@ -0,0 +1 @@
> > +timeout=300
> > diff --git a/tools/testing/selftests/vsock/vmtest.sh b/tools/testing/selftests/vsock/vmtest.sh
> > new file mode 100755
> > index 000000000000..d7e727306175
> > --- /dev/null
> > +++ b/tools/testing/selftests/vsock/vmtest.sh
> > @@ -0,0 +1,423 @@
> > +#!/bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +#
> > +# Copyright (c) 2025 Meta Platforms, Inc. and affiliates
> > +#
> > +# Dependencies:
> > +#		* virtme-ng
> > +#		* busybox-static (used by virtme-ng)
> > +#		* qemu	(used by virtme-ng)
> > +
> > +TAP_PREFIX="# "
> > +VERBOSE=0
> > +KSFT_PASS=0
> > +KSFT_FAIL=1
> > +KSFT_SKIP=4
> 
> Possibly you could source kselftest/ktap_helpers.sh for the above
> 'constant'. Otherwise it would be better to make them readonly.
> 
> > +SCRIPT_DIR="$(cd -P -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd -P)"
> > +VSOCK_TEST=${SCRIPT_DIR}/vsock_test
> > +
> > +TEST_GUEST_PORT=51000
> > +TEST_HOST_PORT=50000
> > +TEST_HOST_PORT_LISTENER=50001
> > +SSH_GUEST_PORT=22
> > +SSH_HOST_PORT=2222
> > +VSOCK_CID=1234
> > +WAIT_PERIOD=3
> > +WAIT_PERIOD_MAX=20
> > +WAIT_TOTAL=$(( WAIT_PERIOD * WAIT_PERIOD_MAX ))
> > +
> > +QEMU_PIDFILE=/tmp/qemu.pid
> 
> You likely want to use mktemp for the above file name.
> 
> > +# virtme-ng offers a netdev for ssh when using "--ssh", but we also need a
> > +# control port forwarded for vsock_test.  Because virtme-ng doesn't support
> > +# adding an additional port to forward to the device created from "--ssh" and
> > +# virtme-init mistakenly sets identical IPs to the ssh device and additional
> > +# devices, we instead opt out of using --ssh, add the device manually, and also
> > +# add the kernel cmdline options that virtme-init uses to setup the interface.
> > +QEMU_TEST_PORT_FWD="hostfwd=tcp::${TEST_HOST_PORT}-:${TEST_GUEST_PORT}"
> > +QEMU_SSH_PORT_FWD="hostfwd=tcp::${SSH_HOST_PORT}-:${SSH_GUEST_PORT}"
> > +QEMU_OPTS="\
> > +	 -netdev user,id=n0,${QEMU_TEST_PORT_FWD},${QEMU_SSH_PORT_FWD} \
> > +	 -device virtio-net-pci,netdev=n0 \
> > +	 -device vhost-vsock-pci,guest-cid=${VSOCK_CID} \
> > +	 --pidfile ${QEMU_PIDFILE} \
> > +"
> > +KERNEL_CMDLINE="virtme.dhcp net.ifnames=0 biosdevname=0 virtme.ssh virtme_ssh_user=$USER"
> > +
> > +LOG=${SCRIPT_DIR}/vmtest.log
> 
> Same here.
> 
> > +TEST_NAMES=(vm_server_host_client vm_client_host_server vm_loopback)
> > +TEST_DESCS=(
> > +	"Run vsock_test in server mode on the VM and in client mode on the host."
> > +	"Run vsock_test in client mode on the VM and in server mode on the host."
> > +	"Run vsock_test using the loopback transport in the VM."
> > +)
> > +
> > +usage() {
> > +	local name
> > +	local desc
> > +	local i
> 
> Minor nit, plewase leave an empty line between variables declaration and
> the actual code.
> 
> [...]
> > +check_deps() {
> > +	for dep in vng ${QEMU} busybox timeout pkill ssh; do
> 
> You don't need to check for 'timeout', as that is part of the coreutils
> and supposed to be available on all the running hosts.
> 
> > +		if [[ ! -x "$(command -v ${dep})" ]]; then
> > +			echo -e "skip:    dependency ${dep} not found!\n"
> > +			exit ${KSFT_SKIP}
> > +		fi
> > +	done
> > +
> > +	if [[ ! -x $(command -v ${VSOCK_TEST}) ]]; then
> > +		printf "skip:    ${VSOCK_TEST} not found!"
> > +		printf " Please build the kselftest vsock target.\n"
> > +		exit ${KSFT_SKIP}
> > +	fi
> > +}
> > +
> > +vm_setup() {
> 
> Possibly 'vm_start()' ?
> 
> > +	local VNG_OPTS=""
> > +	local logfile=/dev/null
> > +
> > +	if [[ "${VERBOSE}" = 1 ]]; then
> > +		VNG_OPTS="--verbose"
> > +		logfile=/dev/stdout
> > +	fi
> > +	vng \
> > +		$VNG_OPTS \
> > +		--run \
> > +		--qemu-opts="${QEMU_OPTS}" \
> > +		--qemu="${QEMU}" \
> > +		--user root \
> > +		--append "${KERNEL_CMDLINE}" \
> > +		--rw  &> ${logfile} &
> > +
> > +	timeout ${WAIT_TOTAL} \
> > +		bash -c 'while [[ ! -e '"${QEMU_PIDFILE}"' ]]; do sleep 1; done; exit 0'
> > +	if [[ ! $? -eq 0 ]]; then
> > +		die "failed to boot VM"
> > +	fi
> > +}
> > +
> > +vm_wait_for_ssh() {
> > +	i=0
> > +	while [[ true ]]; do
> > +		if [[ ${i} -gt ${WAIT_PERIOD_MAX} ]]; then
> 
> WAIT_PERIOD_MAX == 20 is possibly a little low for some systems (i.e.
> the 'host' itself could be a VM)
> 
> > +			die "Timed out waiting for guest ssh"
> > +		fi
> > +		vm_ssh -- true
> > +		if [[ $? -eq 0 ]]; then
> > +			break
> > +		fi
> > +		i=$(( i + 1 ))
> > +		sleep ${WAIT_PERIOD}
> > +	done
> > +}
> > +
> > +wait_for_listener() {
> > +	local port=$1
> > +	local interval=$2
> > +	local max_intervals=$3
> > +	local i=0
> > +	while ! ss -ltn | grep -q ":${port}"; do
> > +		if [[ ${i} -gt ${max_intervals} ]]; then
> > +			die "Timed out waiting for listener on port ${port}"
> > +		fi
> > +		i=$(( i + 1 ))
> > +		sleep ${interval}
> > +	done
> > +}
> 
> FTR there is a very similar helper in selftests/net/net_helper.sh
> 
> > +
> > +vm_wait_for_listener() {
> > +	local port=$1
> > +	vm_ssh <<EOF
> > +$(declare -f wait_for_listener)
> > +wait_for_listener ${port} ${WAIT_PERIOD} ${WAIT_PERIOD_MAX}
> > +EOF
> > +}
> > +
> > +host_wait_for_listener() {
> > +	wait_for_listener ${TEST_HOST_PORT_LISTENER} ${WAIT_PERIOD} ${WAIT_PERIOD_MAX}
> > +}
> > +
> > +__log_stdin() {
> > +	cat | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }'
> > +}
> > +
> > +__log_args() {
> > +	echo "$*" | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }'
> > +}
> > +
> > +log() {
> > +	local prefix="$1"
> > +	shift
> > +
> > +	local redirect=
> > +	if [[ ${VERBOSE} -eq 0 ]]; then
> > +		redirect=/dev/null
> > +	else
> > +		redirect=/dev/stdout
> > +	fi
> > +
> > +	if [[ "$#" -eq 0 ]]; then
> > +		__log_stdin | tee -a ${LOG} > ${redirect}
> > +	else
> > +		__log_args | tee -a ${LOG} > ${redirect}
> > +	fi
> > +}
> > +
> > +log_setup() {
> > +	log "setup" "$@"
> > +}
> > +
> > +log_host() {
> > +	testname=$1
> > +	shift
> > +	log "test:${testname}:host" "$@"
> > +}
> > +
> > +log_guest() {
> > +	testname=$1
> > +	shift
> > +	log "test:${testname}:guest" "$@"
> > +}
> > +
> > +tap_prefix() {
> > +	sed -e "s/^/${TAP_PREFIX}/"
> > +}
> > +
> > +tap_output() {
> > +	if [[ ! -z "$TAP_PREFIX" ]]; then
> > +		read str
> > +		echo $str
> > +	fi
> > +}
> > +
> > +test_vm_server_host_client() {
> > +	local testname="${FUNCNAME[0]#test_}"
> > +
> > +	vm_ssh -- "${VSOCK_TEST}" \
> > +		--mode=server \
> > +		--control-port="${TEST_GUEST_PORT}" \
> > +		--peer-cid=2 \
> > +		2>&1 | log_guest "${testname}" &
> > +
> > +	vm_wait_for_listener ${TEST_GUEST_PORT}
> > +
> > +	${VSOCK_TEST} \
> > +		--mode=client \
> > +		--control-host=127.0.0.1 \
> > +		--peer-cid="${VSOCK_CID}" \
> > +		--control-port="${TEST_HOST_PORT}" 2>&1 | log_host "${testname}"
> > +
> > +	return $?
> > +}
> > +
> > +test_vm_client_host_server() {
> > +	local testname="${FUNCNAME[0]#test_}"
> > +
> > +	${VSOCK_TEST} \
> > +		--mode "server" \
> > +		--control-port "${TEST_HOST_PORT_LISTENER}" \
> > +		--peer-cid "${VSOCK_CID}" 2>&1 | log_host "${testname}" &
> > +
> > +	host_wait_for_listener
> > +
> > +	vm_ssh -- "${VSOCK_TEST}" \
> > +		--mode=client \
> > +		--control-host=10.0.2.2 \
> > +		--peer-cid=2 \
> > +		--control-port="${TEST_HOST_PORT_LISTENER}" 2>&1 | log_guest "${testname}"
> > +
> > +	return $?
> > +}
> > +
> > +test_vm_loopback() {
> > +	local testname="${FUNCNAME[0]#test_}"
> > +	local port=60000 # non-forwarded local port
> > +
> > +	vm_ssh -- ${VSOCK_TEST} \
> > +		--mode=server \
> > +		--control-port="${port}" \
> > +		--peer-cid=1 2>&1 | log_guest "${testname}" &
> > +
> > +	vm_wait_for_listener ${port}
> > +
> > +	vm_ssh -- ${VSOCK_TEST} \
> > +		--mode=client \
> > +		--control-host="127.0.0.1" \
> > +		--control-port="${port}" \
> > +		--peer-cid=1 2>&1 | log_guest "${testname}"
> > +
> > +	return $?
> > +}
> > +
> > +run_test() {
> > +	unset IFS
> 
> This is usually preceed by
> 	OLD_IFS=$IFS
> 
> and restored at the end of the relevant scope, to avoid side effects
> elsewhere.
> 
> > +	local host_oops_cnt_before
> > +	local host_warn_cnt_before
> > +	local vm_oops_cnt_before
> > +	local vm_warn_cnt_before
> > +	local host_oops_cnt_after
> > +	local host_warn_cnt_after
> > +	local vm_oops_cnt_after
> > +	local vm_warn_cnt_after
> > +	local name
> > +	local rc
> > +
> > +	host_oops_cnt_before=$(dmesg | grep -c -i 'Oops')
> > +	host_warn_cnt_before=$(dmesg --level=warn | wc -l)
> > +	vm_oops_cnt_before=$(vm_ssh -- dmesg | grep -c -i 'Oops')
> > +	vm_warn_cnt_before=$(vm_ssh -- dmesg --level=warn | wc -l)
> > +
> > +	name=$(echo "${1}" | awk '{ print $1 }')
> > +	eval test_"${name}"
> > +	rc=$?
> > +
> > +	host_oops_cnt_after=$(dmesg | grep -i 'Oops' | wc -l)
> > +	if [[ ${host_oops_cnt_after} -gt ${host_oops_cnt_before} ]]; then
> > +		echo "${name}: kernel oops detected on host" | log_host ${name}
> > +		rc=$KSFT_FAIL
> > +	fi
> > +
> > +	host_warn_cnt_after=$(dmesg --level=warn | wc -l)
> > +	if [[ ${host_warn_cnt_after} -gt ${host_warn_cnt_before} ]]; then
> > +		echo "${name}: kernel warning detected on host" | log_host ${name}
> > +		rc=$KSFT_FAIL
> > +	fi
> > +
> > +	vm_oops_cnt_after=$(vm_ssh -- dmesg | grep -i 'Oops' | wc -l)
> > +	if [[ ${vm_oops_cnt_after} -gt ${vm_oops_cnt_before} ]]; then
> > +		echo "${name}: kernel oops detected on vm" | log_host ${name}
> > +		rc=$KSFT_FAIL
> > +	fi
> > +
> > +	vm_warn_cnt_after=$(vm_ssh -- dmesg --level=warn | wc -l)
> > +	if [[ ${vm_warn_cnt_after} -gt ${vm_warn_cnt_before} ]]; then
> > +		echo "${name}: kernel warning detected on vm" | log_host ${name}
> > +		rc=$KSFT_FAIL
> > +	fi
> > +
> > +	return ${rc}
> > +}
> > +
> > +while getopts :hvsq: o
> > +do
> > +	case $o in
> > +	v) VERBOSE=1;;
> > +	q) QEMU=$OPTARG;;
> > +	h|*) usage;;
> > +	esac
> > +done
> > +shift $((OPTIND-1))
> > +
> > +trap cleanup EXIT
> > +
> > +if [[ ${#} -eq 0 ]]; then
> > +	ARGS=(${TEST_NAMES[@]})
> > +else
> > +	ARGS=($@)
> > +fi
> > +
> > +check_args "${ARGS[@]}"
> > +check_deps
> > +
> > +QEMU=$(command -v ${QEMU:-qemu-system-$(uname -m)})
> 
> Should the QEMU variable be initialized before check_deps() - where it's
> used?
> 
> To me tt looks like this is almost ready, thank you for the great effort!
> 
> /P
> 

Thanks Paolo, just sent out v5 with these changes!

Best,
Bobby