Re: Issues on Zen4 (hw12) runner

["Marek Marczykowski-Górecki" <marmarek@invisiblethingslab.com>]

[-- Attachment #1: Type: text/plain, Size: 4514 bytes --]

On Mon, May 12, 2025 at 05:11:53PM +0200, Marek Marczykowski-Górecki wrote:
> On Mon, May 12, 2025 at 04:50:22PM +0200, Roger Pau Monné wrote:
> > On Mon, May 12, 2025 at 04:40:29PM +0200, Marek Marczykowski-Górecki wrote:
> > > On Mon, May 12, 2025 at 04:19:59PM +0200, Roger Pau Monné wrote:
> > > > On Mon, May 12, 2025 at 03:31:19PM +0200, Marek Marczykowski-Górecki wrote:
> > > > > On Mon, May 12, 2025 at 12:26:09PM +0200, Roger Pau Monné wrote:
> > > > > > On Thu, May 08, 2025 at 10:44:36PM +0200, Marek Marczykowski-Górecki wrote:
> > > > > > > Hi,
> > > > > > > 
> > > > > > > I wanted to post another revision of the series adding hw12 runner,
> > > > > > > hoping that all known issues are fixed now, but unfortunately there is
> > > > > > > still something broken. I've rebased my series on top of staging
> > > > > > > (ed9488a0d) and got this pipeline:
> > > > > > > 
> > > > > > > https://gitlab.com/xen-project/people/marmarek/xen/-/pipelines/1807819142
> > > > > > > (note due to some added debugging, some tests are incorrectly marked as
> > > > > > > success even if they failed...)
> > > > > > > 
> > > > > > > 1. USB ethernet doesn't work on PVH dom0: https://gitlab.com/xen-project/people/marmarek/xen/-/jobs/9978694739
> > > > > > > There supposed to be an USB ethernet device connected to the USB
> > > > > > > controller at c3:00.4. In the PV dom0 case it's detected as:
> > > > > > > 
> > > > > > >     [    3.911555] usb 7-1.4: new high-speed USB device number 3 using xhci_hcd
> > > > > > >     [    4.004201] usb 7-1.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
> > > > > > >     [    4.004675] usb 7-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
> > > > > > >     [    4.005079] usb 7-1.4: Product: USB 10/100/1000 LAN
> > > > > > >     [    4.005349] usb 7-1.4: Manufacturer: Realtek
> > > > > > >     [    4.005599] usb 7-1.4: SerialNumber: 684D35
> > > > > > > 
> > > > > > > But it's not there on PVH. The USB controller itself is detected, just
> > > > > > > not device(s) connected to it. This applies to other controllers too
> > > > > > > (there should be about 3 or 4 other USB devices - none of them show up).
> > > > > > > 
> > > > > > > 2. There is a bunch of "unhandled memory read" errors during PVH dom0
> > > > > > > startup: https://gitlab.com/xen-project/people/marmarek/xen/-/jobs/9978694739
> > > > > > > 
> > > > > > >     (XEN) [    4.026323] arch/x86/hvm/emulate.c:417:d0v0 unhandled memory read from 0xfedc0020 size 1
> > > > > > >     (XEN) [    4.026789] arch/x86/hvm/emulate.c:417:d0v0 unhandled memory read from 0xfedc0021 size 1
> > > > > > >     (XEN) [    4.027247] arch/x86/hvm/emulate.c:417:d0v0 unhandled memory read from 0xfedc0020 size 1
> > > > > > >     (XEN) [    4.027671] arch/x86/hvm/emulate.c:417:d0v0 unhandled memory read from 0xfedc0021 size 1
> > > > > > >     ...
> > > > > > > 
> > > > > > > This repeats several times. Could be related to the USB issue above?
> > > > > > 
> > > > > > Can you try with dom0=pf-fixup?  Those unhandled accesses might be the
> > > > > > cause of the USB issues.
> > > > > 
> > > > > It did got rid of those messages, but USB still doesn't work:
> > > > > https://gitlab.com/xen-project/people/marmarek/xen/-/jobs/10006580289
> > > > 
> > > > Hm, is it possible that the usage of console=xhci is interfering with
> > > > USB devices?  Could you try to boot without console=xhci and see if
> > > > you can still reproduce the issue?  You will need the physical device
> > > > by your side, which I'm not sure it's possible.  Don't know if you
> > > > host those remotely somewhere.
> > > 
> > > I can try, but will need a proper driver there (in dom0?) - AFAIR VGA
> > > nor efifb doesn't output to HDMI there (and eDP is not connected).
> > > Anyway, it's IMO unlikely, given it works just fine with PV dom0...
> > 
> > Oh, I see, that's a good data point that it works with PV dom0.
> > Handling of r/o subpage accesses is still different between PV and PVH
> > which could maybe explain this, but it's less likely.
> > 
> > Maybe I'm not spotting it, but I don't see any specific errors (like
> > timeouts) from the XHCI controller on the log?  Neither there seems to
> > be any errors or warnings from Xen.
> 
> I don't see any either...

Roger, it looks like your balloon patch fixes the USB case too :)

-- 
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]