From: Niklas Cassel <cassel@kernel.org>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: bhelgaas@google.com, lpieralisi@kernel.org, kw@linux.com,
linux-pci@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, wilfred.mallawa@wdc.com,
Lukas Wunner <lukas@wunner.de>
Subject: Re: [PATCH 1/2] PCI: Save and restore root port config space in pcibios_reset_secondary_bus()
Date: Sat, 24 May 2025 22:54:21 +0200 [thread overview]
Message-ID: <aDIx_TaNXv__uO14@ryzen> (raw)
In-Reply-To: <20250524185304.26698-2-manivannan.sadhasivam@linaro.org>
On Sun, May 25, 2025 at 12:23:03AM +0530, Manivannan Sadhasivam wrote:
> host_bridge::reset_slot() is supposed to reset the PCI root port/slot. Once
> that happens, the config space content would be lost. This was reported by
> Niklas on the dw-rockchip based platform where the MPS setting of the root
> port was lost after the host_bridge::reset_slot() callback. Hence, save the
> config space before calling the host_bridge::reset_slot() callback and
> restore it afterwards.
>
> While at it, make sure that the callback is only called for root ports by
> checking if the bridge is behind the root bus.
>
> Fixes: d5c1e1c25b37 ("PCI/ERR: Add support for resetting the slots in a platform specific way")
> Reported-by: Niklas Cassel <cassel@kernel.org>
> Closes: https://lore.kernel.org/linux-pci/aC9OrPAfpzB_A4K2@ryzen
> Suggested-by: Lukas Wunner <lukas@wunner.de>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
> drivers/pci/pci.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 4d396bbab4a8..6d6e9ce2bbcc 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -4985,10 +4985,19 @@ void __weak pcibios_reset_secondary_bus(struct pci_dev *dev)
> struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
> int ret;
>
> - if (host->reset_slot) {
> + if (pci_is_root_bus(dev->bus) && host->reset_slot) {
> + /*
> + * Save the config space of the root port before doing the
> + * reset, since the state could be lost. The device state
> + * should've been saved by the caller.
> + */
> + pci_save_state(dev);
> ret = host->reset_slot(host, dev);
> if (ret)
> pci_err(dev, "failed to reset slot: %d\n", ret);
> + else
> + /* Now restore it on success */
> + pci_restore_state(dev);
>
> return;
> }
> --
> 2.43.0
>
Looks good to me:
Reviewed-by: Niklas Cassel <cassel@kernel.org>
next prev parent reply other threads:[~2025-05-24 20:54 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-24 18:53 [PATCH 0/2] PCI: Slot reset fixes Manivannan Sadhasivam
2025-05-24 18:53 ` [PATCH 1/2] PCI: Save and restore root port config space in pcibios_reset_secondary_bus() Manivannan Sadhasivam
2025-05-24 20:54 ` Niklas Cassel [this message]
2025-05-25 2:36 ` Wilfred Mallawa
2025-05-25 7:22 ` Lukas Wunner
2025-05-25 7:58 ` Manivannan Sadhasivam
2025-05-26 6:54 ` Lukas Wunner
2025-05-26 11:16 ` Manivannan Sadhasivam
2025-05-24 18:53 ` [PATCH 2/2] PCI: Rename host_bridge::reset_slot() to host_bridge::reset_root_port() Manivannan Sadhasivam
2025-05-24 20:57 ` Niklas Cassel
2025-05-25 2:38 ` Wilfred Mallawa
2025-05-25 8:00 ` Manivannan Sadhasivam
2025-05-24 21:51 ` kernel test robot
2025-05-25 7:26 ` Lukas Wunner
2025-05-26 0:47 ` [PATCH 0/2] PCI: Slot reset fixes Wilfred Mallawa
2025-05-26 5:53 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aDIx_TaNXv__uO14@ryzen \
--to=cassel@kernel.org \
--cc=bhelgaas@google.com \
--cc=kw@linux.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=lukas@wunner.de \
--cc=manivannan.sadhasivam@linaro.org \
--cc=wilfred.mallawa@wdc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.