From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Christian Marangi <ansuelsmth@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sean Wang <sean.wang@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Benjamin Larsson <benjamin.larsson@genexis.eu>,
linux-mediatek@lists.infradead.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, stable@vger.kernel.org
Subject: Re: [PATCH 1/6] pinctrl: airoha: fix wrong PHY LED mux value for LED1 GPIO46
Date: Wed, 28 May 2025 09:16:04 +0200 [thread overview]
Message-ID: <aDa4NCTzyzw0mnfE@lore-desk> (raw)
In-Reply-To: <20250527222040.32000-2-ansuelsmth@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2465 bytes --]
> In all the MUX value for LED1 GPIO46 there is a Copy-Paste error where
> the MUX value is set to LED0_MODE_MASK instead of LED1_MODE_MASK.
>
> This wasn't notice as there were no board that made use of the
> secondary PHY LED but looking at the internal Documentation the actual
> value should be LED1_MODE_MASK similar to the other GPIO entry.
>
> Fix the wrong value to apply the correct MUX configuration.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
>
> Cc: stable@vger.kernel.org
> Fixes: 1c8ace2d0725 ("pinctrl: airoha: Add support for EN7581 SoC")
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
> drivers/pinctrl/mediatek/pinctrl-airoha.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-airoha.c b/drivers/pinctrl/mediatek/pinctrl-airoha.c
> index b97b28ebb37a..8ef7f88477aa 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-airoha.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-airoha.c
> @@ -1752,8 +1752,8 @@ static const struct airoha_pinctrl_func_group phy1_led1_func_group[] = {
> .regmap[0] = {
> AIROHA_FUNC_MUX,
> REG_GPIO_2ND_I2C_MODE,
> - GPIO_LAN3_LED0_MODE_MASK,
> - GPIO_LAN3_LED0_MODE_MASK
> + GPIO_LAN3_LED1_MODE_MASK,
> + GPIO_LAN3_LED1_MODE_MASK
> },
> .regmap[1] = {
> AIROHA_FUNC_MUX,
> @@ -1816,8 +1816,8 @@ static const struct airoha_pinctrl_func_group phy2_led1_func_group[] = {
> .regmap[0] = {
> AIROHA_FUNC_MUX,
> REG_GPIO_2ND_I2C_MODE,
> - GPIO_LAN3_LED0_MODE_MASK,
> - GPIO_LAN3_LED0_MODE_MASK
> + GPIO_LAN3_LED1_MODE_MASK,
> + GPIO_LAN3_LED1_MODE_MASK
> },
> .regmap[1] = {
> AIROHA_FUNC_MUX,
> @@ -1880,8 +1880,8 @@ static const struct airoha_pinctrl_func_group phy3_led1_func_group[] = {
> .regmap[0] = {
> AIROHA_FUNC_MUX,
> REG_GPIO_2ND_I2C_MODE,
> - GPIO_LAN3_LED0_MODE_MASK,
> - GPIO_LAN3_LED0_MODE_MASK
> + GPIO_LAN3_LED1_MODE_MASK,
> + GPIO_LAN3_LED1_MODE_MASK
> },
> .regmap[1] = {
> AIROHA_FUNC_MUX,
> @@ -1944,8 +1944,8 @@ static const struct airoha_pinctrl_func_group phy4_led1_func_group[] = {
> .regmap[0] = {
> AIROHA_FUNC_MUX,
> REG_GPIO_2ND_I2C_MODE,
> - GPIO_LAN3_LED0_MODE_MASK,
> - GPIO_LAN3_LED0_MODE_MASK
> + GPIO_LAN3_LED1_MODE_MASK,
> + GPIO_LAN3_LED1_MODE_MASK
> },
> .regmap[1] = {
> AIROHA_FUNC_MUX,
> --
> 2.48.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2025-05-28 7:20 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-27 22:20 [PATCH 0/6] pinctrl: Add Airoha AN7583 support Christian Marangi
2025-05-27 22:20 ` [PATCH 1/6] pinctrl: airoha: fix wrong PHY LED mux value for LED1 GPIO46 Christian Marangi
2025-05-28 7:16 ` Lorenzo Bianconi [this message]
2025-05-27 22:20 ` [PATCH 2/6] pinctrl: mediatek: airoha: generalize pins/group/function/confs handling Christian Marangi
2025-05-28 8:07 ` Lorenzo Bianconi
2025-05-31 13:29 ` Christian Marangi
2025-05-27 22:20 ` [PATCH 3/6] pinctrl: airoha: convert PHY LED GPIO to macro Christian Marangi
2025-05-28 8:21 ` Lorenzo Bianconi
2025-05-27 22:20 ` [PATCH 4/6] pinctrl: airoha: convert PWM " Christian Marangi
2025-05-28 8:22 ` Lorenzo Bianconi
2025-05-27 22:20 ` [PATCH 5/6] dt-bindings: pinctrl: airoha: Document AN7583 Pin Controller Christian Marangi
2025-06-05 19:55 ` Rob Herring
2025-05-27 22:20 ` [PATCH 6/6] pinctrl: airoha: add support for Airoha AN7583 PINs Christian Marangi
2025-05-28 9:20 ` Benjamin Larsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aDa4NCTzyzw0mnfE@lore-desk \
--to=lorenzo@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=ansuelsmth@gmail.com \
--cc=benjamin.larsson@genexis.eu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh@kernel.org \
--cc=sean.wang@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.