Hi!

> > Series backports the Renesas RZ/G3S SCIF support to v6.12.y CIP.
> > 
> > Thank you,
> > Claudiu Beznea
> > 
> > Claudiu Beznea (6):
> >   clk: renesas: r9a08g045: Add clock, reset and power domain for the
> >     remaining SCIFs
> >   serial: sh-sci: Update the suspend/resume support
> >   arm64: dts: renesas: r9a08g045: Add the remaining SCIF interfaces
> >   arm64: dts: renesas: rzg3s-smarc-switches: Add a header to describe
> >     different switches
> >   arm64: dts: renesas: rzg3s-smarc: Enable SCIF3
> >   arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1
> > 
> > Geert Uytterhoeven (1):
> >   serial: sh-sci: Save and restore more registers
> > 
> >  arch/arm64/boot/dts/renesas/Makefile          |  3 +
> >  arch/arm64/boot/dts/renesas/r9a08g045.dtsi    | 90
> > +++++++++++++++++
> >  .../r9a08g045s33-smarc-pmod1-type-3a.dtso     | 48 ++++++++++
> >  .../boot/dts/renesas/rzg3s-smarc-som.dtsi     | 20 +---
> >  .../boot/dts/renesas/rzg3s-smarc-switches.h   | 40 ++++++++
> >  arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi  | 13 +++
> >  drivers/clk/renesas/r9a08g045-cpg.c           | 25 +++++
> >  drivers/tty/serial/sh-sci.c                   | 96
> > ++++++++++++++++++-
> >  8 files changed, 314 insertions(+), 21 deletions(-)  create mode 100644
> > arch/arm64/boot/dts/renesas/r9a08g045s33-smarc-pmod1-type-3a.dtso
> >  create mode 100644 arch/arm64/boot/dts/renesas/rzg3s-smarc-switches.h
> 
> I reviewed this series, looks good to me.
> I can apply these, if there are no other comments.
> 
> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>

Thank you, I added your reviewed-by tag and applied the series.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany