All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Christian Marangi <ansuelsmth@gmail.com>
Cc: "Uwe Kleine-König" <ukleinek@kernel.org>,
	linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org,
	"Benjamin Larsson" <benjamin.larsson@genexis.eu>,
	"AngeloGioacchino Del Regno"
	<angelogioacchino.delregno@collabora.com>,
	"Lorenzo Bianconi" <lorenzo@kernel.org>
Subject: Re: [PATCH v18] pwm: airoha: Add support for EN7581 SoC
Date: Fri, 27 Jun 2025 11:58:04 +0300	[thread overview]
Message-ID: <aF5dHDr8yDSKlp5j@smile.fi.intel.com> (raw)
In-Reply-To: <20250626224805.9034-1-ansuelsmth@gmail.com>

On Fri, Jun 27, 2025 at 12:47:53AM +0200, Christian Marangi wrote:
> From: Benjamin Larsson <benjamin.larsson@genexis.eu>
> 
> Introduce driver for PWM module available on EN7581 SoC.

...

> + * Copyright 2025 Markus Gothe <markus.gothe@genexis.eu>
> + *		  Christian Marangi <ansuelsmth@gmail.com>

I'm not sure you can change the copyright line like this. I would rather expect

 * Copyright 2012 Markus Gothe <markus.gothe@genexis.eu>
 * Copyright 2025 Christian Marangi <ansuelsmth@gmail.com>

(Sorry, I forgot the exact original year there, but you got the point)

...

> +	/* Global mutex to protect bucket used refcount_t */
> +	struct mutex mutex;

This makes a little sense. Either you use refcount_t (which is atomic) or
use mutex + regular variable.

...

> +	/*
> +	 * It is necessary to explicitly shift out all zeros after muxing
> +	 * to initialize the shift register before enabling PWM
> +	 * mode because in PWM mode SIPO will not start shifting until
> +	 * it needs to output a non-zero value (bit 31 of led_data
> +	 * indicates shifting in progress and it must return to zero
> +	 * before led_data can be written or PWM mode can be set)

Missing period at the end.

> +	 */

...

> +static void airoha_pwm_disable(struct airoha_pwm *pc, struct pwm_device *pwm)
> +{
> +	/* Disable PWM and release the bucket */
> +	airoha_pwm_config_flash_map(pc, pwm->hwpwm, -1);
> +	airoha_pwm_release_bucket_config(pc, pwm->hwpwm);
> +
> +	clear_bit(pwm->hwpwm, pc->initialized);
> +
> +	/* If no SIPO is used, disable the shift register chip */
> +	if (find_next_bit(pc->initialized, AIROHA_PWM_MAX_CHANNELS,
> +			  AIROHA_PWM_NUM_GPIO) >= AIROHA_PWM_NUM_GPIO)

This can be rewritten as

	if (!bitmap_read(pc->initialized, AIROHA_PWM_NUM_GPIO, AIROHA_PWM_NUM_SIPO))

(seems to me that the above code is buggy and has to have a check against the
 full size of bitmap).

> +		regmap_clear_bits(pc->regmap, AIROHA_PWM_REG_SIPO_FLASH_MODE_CFG,
> +				  AIROHA_PWM_SERIAL_GPIO_FLASH_MODE);
> +}

-- 
With Best Regards,
Andy Shevchenko



  reply	other threads:[~2025-06-27  8:58 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-26 22:47 [PATCH v18] pwm: airoha: Add support for EN7581 SoC Christian Marangi
2025-06-27  8:58 ` Andy Shevchenko [this message]
2025-06-27  9:32   ` Christian Marangi
2025-06-27 10:25     ` Andy Shevchenko
2025-06-27 10:34       ` Christian Marangi
2025-06-27 10:56         ` Andy Shevchenko
2025-06-30 10:19           ` Christian Marangi
2025-06-30 10:29             ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aF5dHDr8yDSKlp5j@smile.fi.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=ansuelsmth@gmail.com \
    --cc=benjamin.larsson@genexis.eu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=lorenzo@kernel.org \
    --cc=ukleinek@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.