Re: [PATCH v2 2/6] pci/hotplug/pnv_php: Work around switches with broken

[Lukas Wunner <lukas@wunner.de>]

On Thu, Jun 19, 2025 at 02:29:33PM -0500, Timothy Pearson wrote:
> To be perfectly frank the existing code quality in this driver
> (and the associated EEH driver) is not the best, and it's been
> a frustrating experience trying to hack it into semi-stable
> operation.
> 
> I would vastly prefer to rewrite / integrate into the pciehp driver,
> and we have plans to do so, but that will take an unacceptable amount
> of time vs. trying to fix up the existing driver as a stopgap.
> 
> As you mentioned, pciehp already has this fix, so we just have to
> deal with the duplicated code until we (Raptor) figures out how to
> merge PowerNV support into pciehp.

I don't know how much PCIe hotplug on PowerNV differs from native,
spec-compliant PCIe hotplug.  If the differences are vast (and I
get the feeling they might be if I read terms like "PHB" and
"EEH unfreeze", which sound completely foreign to me), it might
be easier to refactor pnv_php.c and copy patterns or code from
pciehp, than to integrate the functionality from pnv_php.c into
pciehp.

pciehp does carry some historic baggage of its own (such as poll mode),
which you may not want to deal with on PowerNV.

One thing I don't quite understand is, it sounds like you've
attached a PCIe switch to a Root Port and the hotplug ports
are on the PCIe switch.  Aren't those hotplug ports just
bog-standard ones that can be driven by pciehp?  My expectation
would have been that a PowerNV-specific hotplug driver would
only be necessary for hotplug-capable Root Ports.

Thanks,

Lukas