Re: Re: Re: Re: [PATCH] net: stmmac: Support gpio high-level reset for devices requiring it

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Wed, Jul 09, 2025 at 07:42:55PM +0800, lizhe wrote:
> Hi,
>     i have already declared it in the DTS.
> 
>     &gmac {
>             snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
>     };

Active high means that the reset is in effect when the output is at the
logic '1' state. So, gpiod_get_value*() will return the same as
gpiod_get_raw_value*().

Active low means that the reset is in effect when the output is at the
logic '0' state, and in that case the return value of
gpiod_get_value*() will return true when the reset is active (at logic
'0' state) whereas gpiod_get_raw_value*() will return zero.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!