Re: [PATCH v6 1/9] drm: Add a vendor-specific recovery method to drm device wedged uevent

[Rodrigo Vivi <rodrigo.vivi@intel.com>]

On Thu, Jul 24, 2025 at 08:04:30PM +0530, Riana Tauro wrote:
> This patch addresses the need for a recovery method (firmware flash
> on Firmware errors) introduced in the later patches of Xe KMD. Whenever
> XE KMD detects a firmware error, a drm device wedged uevent needs to be sent
> to the system administrator/userspace to trigger a firmware flash.
> 
> The initial proposal to use 'firmware-flash' as a recovery method was
> not applicable to other drivers and could cause multiple recovery
> methods specific to vendors to be added.
> To address this a more generic 'vendor-specific' method is introduced,
> guiding users to refer to vendor specific documentation and system logs
> for detailed vendor specific recovery procedure.
> 
> Add a recovery method 'WEDGED=vendor-specific' for such errors.
> Vendors must provide additional recovery documentation if this method
> is used.
> 
> It is the responsibility of the consumer to refer to the correct vendor
> specific documentation and usecase before attempting a recovery.
> 
> For example: If driver is XE KMD, the consumer must refer
> to the documentation of 'Device Wedging' under 'Documentation/gpu/xe/'.
> 
> Recovery script contributed by Raag.
> 
> v2: fix documentation (Raag)
> v3: add more details to commit message (Sima, Rodrigo, Raag)
>     add an example script to the documentation (Raag)
> v4: use consistent naming (Raag)
> 
> Cc: André Almeida <andrealmeid@igalia.com>
> Cc: Christian König <christian.koenig@amd.com>
> Cc: David Airlie <airlied@gmail.com>

Cc: Simona Vetter <simona.vetter@ffwll.ch>

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

> Co-developed-by: Raag Jadav <raag.jadav@intel.com>
> Signed-off-by: Raag Jadav <raag.jadav@intel.com>
> Signed-off-by: Riana Tauro <riana.tauro@intel.com>
> ---
>  Documentation/gpu/drm-uapi.rst | 42 ++++++++++++++++++++++++++++------
>  drivers/gpu/drm/drm_drv.c      |  2 ++
>  include/drm/drm_device.h       |  4 ++++
>  3 files changed, 41 insertions(+), 7 deletions(-)
> 
> diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst
> index 843facf01b2d..5691b29acde3 100644
> --- a/Documentation/gpu/drm-uapi.rst
> +++ b/Documentation/gpu/drm-uapi.rst
> @@ -418,13 +418,15 @@ needed.
>  Recovery
>  --------
>  
> -Current implementation defines three recovery methods, out of which, drivers
> +Current implementation defines four recovery methods, out of which, drivers
>  can use any one, multiple or none. Method(s) of choice will be sent in the
>  uevent environment as ``WEDGED=<method1>[,..,<methodN>]`` in order of less to
> -more side-effects. If driver is unsure about recovery or method is unknown
> -(like soft/hard system reboot, firmware flashing, physical device replacement
> -or any other procedure which can't be attempted on the fly), ``WEDGED=unknown``
> -will be sent instead.
> +more side-effects. If recovery method is specific to vendor
> +``WEDGED=vendor-specific`` will be sent and userspace should refer to vendor
> +specific documentation for the recovery procedure. As an example if the driver
> +is 'Xe' then the documentation for 'Device Wedging' of Xe driver needs to be
> +referred for the recovery procedure. If driver is unsure about recovery or
> +method is unknown, ``WEDGED=unknown`` will be sent instead.
>  
>  Userspace consumers can parse this event and attempt recovery as per the
>  following expectations.
> @@ -435,6 +437,7 @@ following expectations.
>      none            optional telemetry collection
>      rebind          unbind + bind driver
>      bus-reset       unbind + bus reset/re-enumeration + bind
> +    vendor-specific vendor specific recovery method
>      unknown         consumer policy
>      =============== ========================================
>  
> @@ -472,8 +475,12 @@ erroring out, all device memory should be unmapped and file descriptors should
>  be closed to prevent leaks or undefined behaviour. The idea here is to clear the
>  device of all user context beforehand and set the stage for a clean recovery.
>  
> -Example
> --------
> +For ``WEDGED=vendor-specific`` recovery method, it is the responsibility of the
> +consumer to check the driver documentation and the usecase before attempting
> +a recovery.
> +
> +Example - rebind
> +----------------
>  
>  Udev rule::
>  
> @@ -491,6 +498,27 @@ Recovery script::
>      echo -n $DEVICE > $DRIVER/unbind
>      echo -n $DEVICE > $DRIVER/bind
>  
> +Example - vendor-specific
> +-------------------------
> +
> +Udev rule::
> +
> +    SUBSYSTEM=="drm", ENV{WEDGED}=="vendor-specific", DEVPATH=="*/drm/card[0-9]",
> +    RUN+="/path/to/vendor_specific_recovery.sh $env{DEVPATH}"
> +
> +Recovery script::
> +
> +    #!/bin/sh
> +
> +    DEVPATH=$(readlink -f /sys/$1/device)
> +    DRIVERPATH=$(readlink -f $DEVPATH/driver)
> +    DRIVER=$(basename $DRIVERPATH)
> +
> +    if [ "$DRIVER" = "xe" ]; then
> +        # Refer XE documentation and check usecase and recovery procedure
> +    fi
> +
> +
>  Customization
>  -------------
>  
> diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
> index cdd591b11488..0ac723a46a91 100644
> --- a/drivers/gpu/drm/drm_drv.c
> +++ b/drivers/gpu/drm/drm_drv.c
> @@ -532,6 +532,8 @@ static const char *drm_get_wedge_recovery(unsigned int opt)
>  		return "rebind";
>  	case DRM_WEDGE_RECOVERY_BUS_RESET:
>  		return "bus-reset";
> +	case DRM_WEDGE_RECOVERY_VENDOR:
> +		return "vendor-specific";
>  	default:
>  		return NULL;
>  	}
> diff --git a/include/drm/drm_device.h b/include/drm/drm_device.h
> index a33aedd5e9ec..59fd3f4d5995 100644
> --- a/include/drm/drm_device.h
> +++ b/include/drm/drm_device.h
> @@ -26,10 +26,14 @@ struct pci_controller;
>   * Recovery methods for wedged device in order of less to more side-effects.
>   * To be used with drm_dev_wedged_event() as recovery @method. Callers can
>   * use any one, multiple (or'd) or none depending on their needs.
> + *
> + * Refer to "Device Wedging" chapter in Documentation/gpu/drm-uapi.rst for more
> + * details.
>   */
>  #define DRM_WEDGE_RECOVERY_NONE		BIT(0)	/* optional telemetry collection */
>  #define DRM_WEDGE_RECOVERY_REBIND	BIT(1)	/* unbind + bind driver */
>  #define DRM_WEDGE_RECOVERY_BUS_RESET	BIT(2)	/* unbind + reset bus device + bind */
> +#define DRM_WEDGE_RECOVERY_VENDOR	BIT(3)	/* vendor specific recovery method */
>  
>  /**
>   * struct drm_wedge_task_info - information about the guilty task of a wedge dev
> -- 
> 2.47.1
>