Re: [PATCH v2 2/2] dt-bindings: iio: magnetometer: document Infineon TLV493D 3D Magnetic sensor

[Dixit Parmar <dixitparmar19@gmail.com>]

On Mon, Aug 04, 2025 at 08:16:36AM +0200, Krzysztof Kozlowski wrote:
> On 04/08/2025 08:03, Krzysztof Kozlowski wrote:
> >>>>
> >>>> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d.yaml b/Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d.yaml
> >>>> new file mode 100644
> >>>> index 000000000000..ebcf29067a16
> >>>> --- /dev/null
> >>>> +++ b/Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d.yaml
> >>>
> >>>
> >>> Filename should match compatible. Otherwise a1b6 is just confusing.
> >>>
> >> Idea behind having a1b6 is that the TLV493D is sensor series and this
> >> a1b6 is one of the models. As this driver is intended, developed and
> >> validated on a1b6 I kept it in compatible, though the file name contains
> >> only the sensor series. In my undertanding, this same file & driver can
> >> be reused for other drivers from same family with new compatible fields.
> >> Does that make sense?
> > 
> > No, because I did not speak about drivers at all. Please follow
> > kernel/DT conventions.
> > 
> 
> And now I see this wasn't ever tested. :/
>
You're right. I just learned about the devicetree binding validation process post
your comment, make dt_binding_check. This is my first time contributing to DT bindings,
so I wasn't aware of the requirement to validate the schema before submission.
There was mention of this in the bot error reported, now I see.
Apologies for the oversight. I'll make sure this does not get repeated.
> Best regards,
> Krzysztof