Re: [PATCH v2 1/3] CI: Add driver domains tests

[dmkhn@proton.me]

On Fri, Aug 08, 2025 at 04:32:41PM +0200, Marek Marczykowski-Górecki wrote:
> Setup a simple two domU system. One with network backend, running
> xendriverdomain service, and one with frontend, trying to ping the
> backend.
> 
> Contrary to other similar tests, use disk image instead of initrd, to
> allow bigger rootfs without adding more RAM (for both dom0 and domU).
> But keep using pxelinux as a bootloader as it's easier to setup than
> installing grub on the disk. Theoretically, it could be started via direct
> kernel boot in QEMU, but pxelinux is slightly closer to real-world
> deployment.
> 
> Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

Reviewed-by: Denis Mukhin <dmukhin@ford.com> 

> ---
> Changes in v2:
> - use heredoc
> - limit ping loop iterations
> - use full "backend" / "frontend" in disk image names
> - print domU consoles directly to /dev/console, to avoid systemd-added
>   messages prefix
> - terminate test on failure, don't wait for timeout
> ---
>  automation/gitlab-ci/test.yaml                  |   8 +-
>  automation/scripts/qemu-driverdomains-x86_64.sh | 130 +++++++++++++++++-
>  2 files changed, 138 insertions(+)
>  create mode 100755 automation/scripts/qemu-driverdomains-x86_64.sh
> 
> diff --git a/automation/gitlab-ci/test.yaml b/automation/gitlab-ci/test.yaml
> index 1f0b27b2378a..5c4b2dc304b4 100644
> --- a/automation/gitlab-ci/test.yaml
> +++ b/automation/gitlab-ci/test.yaml
> @@ -656,6 +656,14 @@ qemu-alpine-x86_64-gcc:
>      - *x86-64-test-needs
>      - alpine-3.18-gcc
> 
> +qemu-alpine-driverdomains-x86_64-gcc:
> +  extends: .qemu-x86-64
> +  script:
> +    - ./automation/scripts/qemu-driverdomains-x86_64.sh 2>&1 | tee ${LOGFILE}
> +  needs:
> +    - *x86-64-test-needs
> +    - alpine-3.18-gcc
> +
>  qemu-smoke-x86-64-gcc:
>    extends: .qemu-smoke-x86-64
>    script:
> diff --git a/automation/scripts/qemu-driverdomains-x86_64.sh b/automation/scripts/qemu-driverdomains-x86_64.sh
> new file mode 100755
> index 000000000000..a8e2ceb33527
> --- /dev/null
> +++ b/automation/scripts/qemu-driverdomains-x86_64.sh
> @@ -0,0 +1,130 @@
> +#!/bin/bash
> +
> +set -ex -o pipefail
> +
> +dom0_rootfs_extra_comp=()
> +dom0_rootfs_extra_uncomp=()
> +
> +cd binaries
> +
> +# DomU rootfs
> +
> +mkdir -p rootfs
> +cd rootfs
> +mkdir -p etc/local.d
> +passed="ping test passed"
> +failed="TEST FAILED"
> +cat > etc/local.d/xen.start << EOF
> +#!/bin/bash
> +
> +set -x
> +
> +if grep -q test=backend /proc/cmdline; then
> +    brctl addbr xenbr0
> +    ip link set xenbr0 up
> +    ip addr add 192.168.0.1/24 dev xenbr0
> +    bash /etc/init.d/xendriverdomain start
> +    # log backend-related logs to the console
> +    tail -F /var/log/xen/xldevd.log /var/log/xen/xen-hotplug.log >>/dev/console 2>/dev/null &
> +else
> +    ip link set eth0 up
> +    ip addr add 192.168.0.2/24 dev eth0
> +    timeout=6 # 6*10s
> +    until ping -c 10 192.168.0.1; do
> +        sleep 1
> +        if [ \$timeout -le 0 ]; then
> +            echo "${failed}"
> +            exit 1
> +        fi
> +        ((timeout--))
> +    done
> +    echo "${passed}"
> +fi
> +EOF
> +chmod +x etc/local.d/xen.start
> +zcat ../rootfs.cpio.gz | cpio -imd
> +zcat ../xen-tools.cpio.gz | cpio -imd
> +mkfs.ext4 -d . ../domU-rootfs.img 1024M
> +cd ..
> +rm -rf rootfs
> +
> +# Dom0 rootfs
> +mkdir -p rootfs
> +cd rootfs
> +zcat ../rootfs.cpio.gz | cpio -imd
> +zcat ../xen-tools.cpio.gz | cpio -imd
> +mkdir -p root etc/local.d
> +cat > root/backend.cfg << EOF
> +name="backend"
> +memory=512
> +vcpus=1
> +kernel="/root/bzImage"
> +extra="console=hvc0 root=/dev/xvda net.ifnames=0 test=backend"
> +disk=[ '/root/domU-rootfs-backend.img,raw,xvda,rw' ]
> +EOF
> +cat > root/frontend.cfg << EOF
> +name="frontend"
> +memory=512
> +vcpus=1
> +kernel="/root/bzImage"
> +extra="console=hvc0 root=/dev/xvda net.ifnames=0 test=frontend"
> +disk=[ '/root/domU-rootfs-frontend.img,raw,xvda,rw' ]
> +vif=[ 'bridge=xenbr0,backend=backend' ]
> +EOF
> +
> +cat > etc/local.d/xen.start << EOF
> +#!/bin/bash
> +
> +set -x
> +
> +bash /etc/init.d/xencommons start
> +
> +xl list
> +
> +tail -F /var/log/xen/console/guest-backend.log 2>/dev/null | sed -e "s/^/(backend) /" >>/dev/console &
> +tail -F /var/log/xen/console/guest-frontend.log 2>/dev/null | sed -e "s/^/(frontend) /" >>/dev/console &
> +xl -vvv create /root/backend.cfg
> +xl -vvv create /root/frontend.cfg
> +EOF
> +chmod +x etc/local.d/xen.start
> +
> +cp ../domU-rootfs.img ./root/domU-rootfs-backend.img
> +cp ../domU-rootfs.img ./root/domU-rootfs-frontend.img
> +cp ../bzImage ./root/
> +mkdir -p etc/default
> +echo 'XENCONSOLED_TRACE=all' >> etc/default/xencommons
> +mkdir -p var/log/xen/console
> +mkfs.ext4 -d . ../dom0-rootfs.img 2048M
> +cd ..
> +rm -rf rootfs
> +
> +cd ..
> +
> +cat >> binaries/pxelinux.0 << EOF
> +#!ipxe
> +
> +kernel xen console=com1 console_timestamps=boot
> +module bzImage console=hvc0 root=/dev/sda net.ifnames=0
> +boot
> +EOF
> +
> +# Run the test
> +rm -f smoke.serial
> +export TEST_CMD="qemu-system-x86_64 \
> +    -cpu qemu64,+svm \
> +    -m 2G -smp 2 \
> +    -monitor none -serial stdio \
> +    -nographic \
> +    -device virtio-net-pci,netdev=n0 \
> +    -netdev user,id=n0,tftp=binaries,bootfile=/pxelinux.0 \
> +    -drive file=binaries/dom0-rootfs.img,format=raw"
> +
> +export TEST_LOG="smoke.serial"
> +export BOOT_MSG="Latest ChangeSet: "
> +export LOG_MSG="Domain-0"
> +# exit early on test failure too, check if it was success below
> +export PASSED="$passed|$failed"
> +
> +./automation/scripts/console.exp | sed 's/\r\+$//'
> +
> +grep "$passed" smoke.serial
> --
> git-series 0.9.1
>