All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Cc: Ray Liu <ray.liu@airoha.com>, Mark Brown <broonie@kernel.org>,
	Jyothi Kumar Seerapu <quic_jseerapu@quicinc.com>,
	linux-arm-kernel@lists.infradead.org, linux-spi@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 03/13] spi: airoha: add support of dual/quad wires spi modes
Date: Sat, 23 Aug 2025 16:42:40 +0200	[thread overview]
Message-ID: <aKnTYNsaBIkh6OBS@lore-rh-laptop> (raw)
In-Reply-To: <68130d82-edbe-4e23-9538-733f9c52123c@iopsys.eu>

[-- Attachment #1: Type: text/plain, Size: 5419 bytes --]

> 
> On 23.08.2025 11:16, Lorenzo Bianconi wrote:
> > [...]
> >> -static int airoha_snand_write_data(struct airoha_snand_ctrl *as_ctrl, u8 cmd,
> >> -				   const u8 *data, int len)
> >> +static int airoha_snand_write_data(struct airoha_snand_ctrl *as_ctrl,
> >> +				   const u8 *data, int len, int buswidth)
> >>  {
> >>  	int i, data_len;
> >> +	u8 cmd;
> >> +
> >> +	switch (buswidth) {
> >> +	case 0:
> >> +	case 1:
> >> +		cmd = SNAND_FIFO_TX_BUSWIDTH_SINGLE;
> >> +		break;
> >> +	case 2:
> >> +		cmd = SNAND_FIFO_TX_BUSWIDTH_DUAL;
> >> +		break;
> >> +	case 4:
> >> +		cmd = SNAND_FIFO_TX_BUSWIDTH_QUAD;
> >> +		break;
> >> +	default:
> >> +		return -EINVAL;
> >> +	}
> > Since this is used in airoha_snand_write_data() and in airoha_snand_read_data()
> > I guess you can define a routine for it.
> 
> It's not the same. It looks similar, but different constants are used
> for rx and tx cases.

ops, I missed TX vs RX.

Regards,
Lorenzo

> 
> >
> >>  
> >>  	for (i = 0; i < len; i += data_len) {
> >>  		int err;
> >> @@ -409,16 +433,32 @@ static int airoha_snand_write_data(struct airoha_snand_ctrl *as_ctrl, u8 cmd,
> >>  	return 0;
> >>  }
> >>  
> >> -static int airoha_snand_read_data(struct airoha_snand_ctrl *as_ctrl, u8 *data,
> >> -				  int len)
> >> +static int airoha_snand_read_data(struct airoha_snand_ctrl *as_ctrl,
> >> +				  u8 *data, int len, int buswidth)
> >>  {
> >>  	int i, data_len;
> >> +	u8 cmd;
> >> +
> >> +	switch (buswidth) {
> >> +	case 0:
> >> +	case 1:
> >> +		cmd = SNAND_FIFO_RX_BUSWIDTH_SINGLE;
> >> +		break;
> >> +	case 2:
> >> +		cmd = SNAND_FIFO_RX_BUSWIDTH_DUAL;
> >> +		break;
> >> +	case 4:
> >> +		cmd = SNAND_FIFO_RX_BUSWIDTH_QUAD;
> >> +		break;
> >> +	default:
> >> +		return -EINVAL;
> >> +	}
> >>  
> >>  	for (i = 0; i < len; i += data_len) {
> >>  		int err;
> >>  
> >>  		data_len = min(len - i, SPI_MAX_TRANSFER_SIZE);
> >> -		err = airoha_snand_set_fifo_op(as_ctrl, 0xc, data_len);
> >> +		err = airoha_snand_set_fifo_op(as_ctrl, cmd, data_len);
> >>  		if (err)
> >>  			return err;
> >>  
> >> @@ -895,12 +935,27 @@ static ssize_t airoha_snand_dirmap_write(struct spi_mem_dirmap_desc *desc,
> >>  static int airoha_snand_exec_op(struct spi_mem *mem,
> >>  				const struct spi_mem_op *op)
> >>  {
> >> -	u8 data[8], cmd, opcode = op->cmd.opcode;
> >>  	struct airoha_snand_ctrl *as_ctrl;
> >> -	int i, err;
> >> +	char buf[20], *data;
> >> +	int i, err, op_len, addr_len, dummy_len;
> > nit: can you please respect the 'reverse christmas tree' here?
> will fix
> >
> >>  
> >>  	as_ctrl = spi_controller_get_devdata(mem->spi->controller);
> >>  
> >> +	op_len = op->cmd.nbytes;
> >> +	addr_len = op->addr.nbytes;
> >> +	dummy_len = op->dummy.nbytes;
> >> +
> >> +	if (op_len + dummy_len + addr_len > sizeof(buf))
> >> +		return -EIO;
> >> +
> >> +	data = buf;
> >> +	for (i = 0; i < op_len; i++)
> >> +		*data++ = op->cmd.opcode >> (8 * (op_len - i - 1));
> >> +	for (i = 0; i < addr_len; i++)
> >> +		*data++ = op->addr.val >> (8 * (addr_len - i - 1));
> >> +	for (i = 0; i < dummy_len; i++)
> >> +		*data++ = 0xff;
> >> +
> >>  	/* switch to manual mode */
> >>  	err = airoha_snand_set_mode(as_ctrl, SPI_MODE_MANUAL);
> >>  	if (err < 0)
> >> @@ -911,40 +966,40 @@ static int airoha_snand_exec_op(struct spi_mem *mem,
> >>  		return err;
> >>  
> >>  	/* opcode */
> >> -	err = airoha_snand_write_data(as_ctrl, 0x8, &opcode, sizeof(opcode));
> >> +	data = buf;
> >> +	err = airoha_snand_write_data(as_ctrl, data, op_len,
> >> +				      op->cmd.buswidth);
> >>  	if (err)
> >>  		return err;
> >>  
> >>  	/* addr part */
> >> -	cmd = opcode == SPI_NAND_OP_GET_FEATURE ? 0x11 : 0x8;
> >> -	put_unaligned_be64(op->addr.val, data);
> >> -
> >> -	for (i = ARRAY_SIZE(data) - op->addr.nbytes;
> >> -	     i < ARRAY_SIZE(data); i++) {
> >> -		err = airoha_snand_write_data(as_ctrl, cmd, &data[i],
> >> -					      sizeof(data[0]));
> >> +	data += op_len;
> >> +	if (addr_len) {
> >> +		err = airoha_snand_write_data(as_ctrl, data, addr_len,
> >> +					      op->addr.buswidth);
> >>  		if (err)
> >>  			return err;
> >>  	}
> >>  
> >>  	/* dummy */
> >> -	data[0] = 0xff;
> >> -	for (i = 0; i < op->dummy.nbytes; i++) {
> >> -		err = airoha_snand_write_data(as_ctrl, 0x8, &data[0],
> >> -					      sizeof(data[0]));
> >> +	data += addr_len;
> >> +	if (dummy_len) {
> >> +		err = airoha_snand_write_data(as_ctrl, data, dummy_len,
> >> +					      op->dummy.buswidth);
> >>  		if (err)
> >>  			return err;
> >>  	}
> >>  
> >>  	/* data */
> >> -	if (op->data.dir == SPI_MEM_DATA_IN) {
> >> -		err = airoha_snand_read_data(as_ctrl, op->data.buf.in,
> >> -					     op->data.nbytes);
> >> -		if (err)
> >> -			return err;
> >> -	} else {
> >> -		err = airoha_snand_write_data(as_ctrl, 0x8, op->data.buf.out,
> >> -					      op->data.nbytes);
> >> +	if (op->data.nbytes) {
> >> +		if (op->data.dir == SPI_MEM_DATA_IN)
> >> +			err = airoha_snand_read_data(as_ctrl, op->data.buf.in,
> >> +						     op->data.nbytes,
> >> +						     op->data.buswidth);
> >> +		else
> >> +			err = airoha_snand_write_data(as_ctrl, op->data.buf.out,
> >> +						      op->data.nbytes,
> >> +						      op->data.buswidth);
> >>  		if (err)
> >>  			return err;
> >>  	}
> >> -- 
> >> 2.50.1
> >>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2025-08-23 14:47 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-20 12:33 [PATCH v3 00/14] spi: airoha: driver fixes & improvements Mikhail Kshevetskiy
2025-08-20 12:33 ` [PATCH v3 01/14] spi: airoha: return an error for continuous mode dirmap creation cases Mikhail Kshevetskiy
2025-08-20 12:33 ` [PATCH v3 02/14] spi: airoha: remove unnecessary restriction length Mikhail Kshevetskiy
2025-08-20 12:33 ` [PATCH v3 03/14] spi: airoha: add support of dual/quad wires spi modes Mikhail Kshevetskiy
2025-08-20 12:48   ` Jyothi Kumar Seerapu
2025-08-20 12:33 ` [PATCH v3 04/14] spi: airoha: remove unnecessary switch to non-dma mode Mikhail Kshevetskiy
2025-08-20 12:33 ` [PATCH v3 05/14] spi: airoha: unify dirmap read/write code Mikhail Kshevetskiy
2025-08-20 12:33 ` [PATCH v3 06/14] spi: airoha: switch back to non-dma mode in the case of error Mikhail Kshevetskiy
2025-08-20 12:33 ` [PATCH v3 07/14] spi: airoha: fix reading/writing of flashes with more than one plane per lun Mikhail Kshevetskiy
2025-08-20 12:33 ` [PATCH v3 08/14] spi: airoha: support of dualio/quadio flash reading commands Mikhail Kshevetskiy
2025-08-20 12:33 ` [PATCH v3 09/14] spi: airoha: allow reading/writing of oob area Mikhail Kshevetskiy
2025-08-20 12:33 ` [PATCH v3 10/14] spi: airoha: buffer must be 0xff-ed before writing Mikhail Kshevetskiy
2025-08-20 12:33 ` [PATCH v3 11/14] spi: airoha: avoid setting of page/oob sizes in REG_SPI_NFI_PAGEFMT Mikhail Kshevetskiy
2025-08-20 12:33 ` [PATCH v3 12/14] spi: airoha: reduce the number of modification of REG_SPI_NFI_CNFG and REG_SPI_NFI_SECCUS_SIZE registers Mikhail Kshevetskiy
2025-08-20 12:33 ` [PATCH v3 13/14] spi: airoha: set custom sector size equal to flash page size Mikhail Kshevetskiy
2025-08-20 12:33 ` [PATCH v3 14/14] spi: airoha: avoid reading flash page settings from SNFI registers during driver startup Mikhail Kshevetskiy
2025-08-21  6:58 ` [PATCH v3 00/14] spi: airoha: driver fixes & improvements Lorenzo Bianconi
2025-08-21 11:13   ` Mikhail Kshevetskiy
2025-08-21 11:34     ` Lorenzo Bianconi
2025-08-21 12:24       ` Mikhail Kshevetskiy
2025-08-22  3:31       ` Mikhail Kshevetskiy
2025-08-22  6:46         ` Lorenzo Bianconi
2025-08-22 11:22           ` Mikhail Kshevetskiy
2025-08-22 13:14             ` Lorenzo Bianconi
2025-08-22 14:36               ` Mikhail Kshevetskiy
2025-08-22 20:00               ` Mikhail Kshevetskiy
2025-08-22 11:27           ` Mikhail Kshevetskiy
2025-08-23  0:16           ` [PATCH v4 00/13] " Mikhail Kshevetskiy
2025-08-23  0:16             ` [PATCH v4 01/13] spi: airoha: return an error for continuous mode dirmap creation cases Mikhail Kshevetskiy
2025-08-23  8:04               ` Lorenzo Bianconi
2025-08-23 13:52                 ` Mikhail Kshevetskiy
2025-08-23  0:16             ` [PATCH v4 02/13] spi: airoha: remove unnecessary restriction length Mikhail Kshevetskiy
2025-08-23  0:16             ` [PATCH v4 03/13] spi: airoha: add support of dual/quad wires spi modes Mikhail Kshevetskiy
2025-08-23  8:16               ` Lorenzo Bianconi
2025-08-23 13:54                 ` Mikhail Kshevetskiy
2025-08-23 14:42                   ` Lorenzo Bianconi [this message]
2025-08-23  0:16             ` [PATCH v4 04/13] spi: airoha: remove unnecessary switch to non-dma mode Mikhail Kshevetskiy
2025-08-23  8:29               ` Lorenzo Bianconi
2025-08-23  0:16             ` [PATCH v4 05/13] spi: airoha: unify dirmap read/write code Mikhail Kshevetskiy
2025-08-23  0:16             ` [PATCH v4 06/13] spi: airoha: switch back to non-dma mode in the case of error Mikhail Kshevetskiy
2025-08-23  8:34               ` Lorenzo Bianconi
2025-08-23  0:16             ` [PATCH v4 07/13] spi: airoha: fix reading/writing of flashes with more than one plane per lun Mikhail Kshevetskiy
2025-08-23  8:36               ` Lorenzo Bianconi
2025-08-23  0:16             ` [PATCH v4 08/13] spi: airoha: support of dualio/quadio flash reading commands Mikhail Kshevetskiy
2025-08-23  0:16             ` [PATCH v4 09/13] spi: airoha: avoid setting of page/oob sizes in REG_SPI_NFI_PAGEFMT Mikhail Kshevetskiy
2025-08-23  0:16             ` [PATCH v4 10/13] spi: airoha: reduce the number of modification of REG_SPI_NFI_CNFG and REG_SPI_NFI_SECCUS_SIZE registers Mikhail Kshevetskiy
2025-08-23  0:16             ` [PATCH v4 11/13] spi: airoha: set custom sector size equal to flash page size Mikhail Kshevetskiy
2025-08-23  0:16             ` [PATCH v4 12/13] spi: airoha: avoid reading flash page settings from SNFI registers during driver startup Mikhail Kshevetskiy
2025-08-23  0:16             ` [PATCH v4 13/13] spi: airoha: buffer must be 0xff-ed before writing Mikhail Kshevetskiy
2025-08-23 16:01             ` [PATCH v5 00/13] spi: airoha: driver fixes & improvements Mikhail Kshevetskiy
2025-08-23 16:01               ` [PATCH v5 01/13] spi: airoha: return an error for continuous mode dirmap creation cases Mikhail Kshevetskiy
2025-08-23 16:01               ` [PATCH v5 02/13] spi: airoha: remove unnecessary restriction length Mikhail Kshevetskiy
2025-08-23 16:01               ` [PATCH v5 03/13] spi: airoha: add support of dual/quad wires spi modes to exec_op() handler Mikhail Kshevetskiy
2025-08-23 16:01               ` [PATCH v5 04/13] spi: airoha: remove unnecessary switch to non-dma mode Mikhail Kshevetskiy
2025-08-23 16:01               ` [PATCH v5 05/13] spi: airoha: switch back to non-dma mode in the case of error Mikhail Kshevetskiy
2025-08-23 16:01               ` [PATCH v5 06/13] spi: airoha: fix reading/writing of flashes with more than one plane per lun Mikhail Kshevetskiy
2025-08-23 16:01               ` [PATCH v5 07/13] spi: airoha: unify dirmap read/write code Mikhail Kshevetskiy
2025-08-23 16:01               ` [PATCH v5 08/13] spi: airoha: support of dualio/quadio flash reading commands Mikhail Kshevetskiy
2025-08-23 16:01               ` [PATCH v5 09/13] spi: airoha: avoid setting of page/oob sizes in REG_SPI_NFI_PAGEFMT Mikhail Kshevetskiy
2025-08-23 16:01               ` [PATCH v5 10/13] spi: airoha: reduce the number of modification of REG_SPI_NFI_CNFG and REG_SPI_NFI_SECCUS_SIZE registers Mikhail Kshevetskiy
2025-08-23 16:01               ` [PATCH v5 11/13] spi: airoha: set custom sector size equal to flash page size Mikhail Kshevetskiy
2025-08-23 16:01               ` [PATCH v5 12/13] spi: airoha: avoid reading flash page settings from SNFI registers during driver startup Mikhail Kshevetskiy
2025-08-23 16:01               ` [PATCH v5 13/13] spi: airoha: buffer must be 0xff-ed before writing Mikhail Kshevetskiy
2025-08-29  7:14               ` [PATCH v5 00/13] spi: airoha: driver fixes & improvements Mikhail Kshevetskiy
2025-08-29  8:45                 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aKnTYNsaBIkh6OBS@lore-rh-laptop \
    --to=lorenzo@kernel.org \
    --cc=broonie@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=mikhail.kshevetskiy@iopsys.eu \
    --cc=quic_jseerapu@quicinc.com \
    --cc=ray.liu@airoha.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.