Re: [PATCH v3 00/32] clk: at91: add support for parent_data and

[Brian Masney <bmasney@redhat.com>]

Hi Ryan and Claudiu,

On Thu, Jul 10, 2025 at 01:06:53PM -0700, Ryan.Wanner@microchip.com wrote:
> From: Ryan Wanner <Ryan.Wanner@microchip.com>
> 
> This series adds support for parent data and parent _hw on the at91
> clock drivers. This also updates all the SoC specific clock drivers to
> use this format as well.
> 
> This is a continuation of the V1 of this series here [1].
> 
> This has been tested on the SAMA5* SoCs, the sam9x* SoCs, and the SAMA7*
> SoCs.
> 
> Changes v1 -> V2:
> - Remove all the small sama7g54 SoC driver changes and put them in their
>   own patch.
> - Add the SAMA7D65 and the SAM9X75 to this update.
> - Add a patch to move all common used macros into the pmc.h file.
> - Update changes from v6.6 to v6.16.
> - Remove patches that where style fixes and include those in the update.
> 
> Changes v2 -> v3:
> - Adjust each patch so they are fully atomic.
> - Add a patch to have the SAMA7D65 systemclocks use parent_data and
>   parent_hw.
> - Add a formatting cleanup patch for the SAM9X75.
> - Adjust commit messages that no longer show invalid information.
> 
> 
> 1) https://lore.kernel.org/all/20230727053156.13587-1-claudiu.beznea@tuxon.dev/
> 
> 
> Claudiu Beznea (28):
>   clk: at91: pmc: add macros for clk_parent_data
>   clk: at91: clk-sam9x60-pll: use clk_parent_data
>   clk: at91: clk-peripheral: switch to clk_parent_data
>   clk: at91: clk-main: switch to clk parent data
>   clk: at91: clk-utmi: use clk_parent_data
>   clk: at91: clk-master: use clk_parent_data
>   clk: at91: clk-programmable: use clk_parent_data
>   clk: at91: clk-generated: use clk_parent_data
>   clk: at91: clk-usb: add support for clk_parent_data
>   clk: at91: clk-system: use clk_parent_data
>   clk: at91: clk-pll: add support for parent_hw
>   clk: at91: clk-audio-pll: add support for parent_hw
>   clk: at91: clk-plldiv: add support for parent_hw
>   clk: at91: clk-h32mx: add support for parent_hw
>   clk: at91: clk-i2s-mux: add support for parent_hw
>   clk: at91: clk-smd: add support for clk_parent_data
>   clk: at91: clk-slow: add support for parent_hw
>   clk: at91: dt-compat: switch to parent_hw and parent_data
>   clk: at91: sam9x60: switch to parent_hw and parent_data
>   clk: at91: sama5d2: switch to parent_hw and parent_data
>   clk: at91: sama5d3: switch to parent_hw and parent_data
>   clk: at91: sama5d4: switch to parent_hw and parent_data
>   clk: at91: at91sam9x5: switch to parent_hw and parent_data
>   clk: at91: at91rm9200: switch to parent_hw and parent_data
>   clk: at91: at91sam9260: switch to parent_hw and parent_data
>   clk: at91: at91sam9g45: switch to parent_hw and parent_data
>   clk: at91: at91sam9n12: switch to parent_hw and parent_data
>   clk: at91: at91sam9rl: switch to clk_parent_data
> 
> Ryan Wanner (4):
>   clk: at91: pmc: Move macro to header file
>   clk: at91: sam9x75: switch to parent_hw and parent_data
>   clk: at91: sama7d65: switch to parent_hw and parent_data
>   clk: at91: sam9x7: Clean up formatting

What tree did you develop this against? When I try to apply this series
to Linus's tree (6.17-rc3) and linux-next, only 12 of these patches
actually apply with 'git am'.

Brian