All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mike Snitzer <snitzer@kernel.org>
To: Chuck Lever <chuck.lever@oracle.com>
Cc: linux-nfs@vger.kernel.org, Jeff Layton <jlayton@kernel.org>
Subject: Re: [PATCH v8 3/7] NFSD: add io_cache_read controls to debugfs interface
Date: Wed, 3 Sep 2025 12:02:39 -0400	[thread overview]
Message-ID: <aLhmnwNasNnZIew1@kernel.org> (raw)
In-Reply-To: <aLhZsfJMwsGu1eu3@kernel.org>

On Wed, Sep 03, 2025 at 11:07:29AM -0400, Mike Snitzer wrote:
> On Wed, Sep 03, 2025 at 10:38:45AM -0400, Chuck Lever wrote:

> > > diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
> > > index 1cd0bed57bc2f..6ef799405145f 100644
> > > --- a/fs/nfsd/nfsd.h
> > > +++ b/fs/nfsd/nfsd.h
> > > @@ -153,6 +153,15 @@ static inline void nfsd_debugfs_exit(void) {}
> > >  
> > >  extern bool nfsd_disable_splice_read __read_mostly;
> > >  
> > > +enum {
> > > +	NFSD_IO_UNSPECIFIED = 0,
> > > +	NFSD_IO_BUFFERED,
> > > +	NFSD_IO_DONTCACHE,
> > > +	NFSD_IO_DIRECT,
> > > +};
> > > +
> > > +extern u64 nfsd_io_cache_read __read_mostly;
> > 
> > And then here, initialize nfsd_io_cache_read to reflect the default
> > behavior. That would be NFSD_IO_BUFFERED for now... then later we might
> > want to change it to NFSD_IO_DIRECT, for instance.
> > 
> > Same suggestion for 4/7.
> 
> Ah ok, I can see the way forward to default to NFSD_IO_BUFFERED but
> _not_ default to it when erroring (if the user specified some unknown
> value).
> 
> I'll run with that (despite just asking Jeff's opinion above, I'm the
> one who came up with the awkward UNSPECIFIED state when honoring
> Jeff's early feedback).

Here is the incremental diff (these changes will be folded into
appropriate patches in v9):

diff --git a/fs/nfsd/debugfs.c b/fs/nfsd/debugfs.c
index 8878c3519b30c..173032a04cdec 100644
--- a/fs/nfsd/debugfs.c
+++ b/fs/nfsd/debugfs.c
@@ -43,11 +43,10 @@ DEFINE_DEBUGFS_ATTRIBUTE(nfsd_dsr_fops, nfsd_dsr_get, nfsd_dsr_set, "%llu\n");
  * /sys/kernel/debug/nfsd/io_cache_read
  *
  * Contents:
- *   %1: NFS READ will use buffered IO
- *   %2: NFS READ will use dontcache (buffered IO w/ dropbehind)
- *   %3: NFS READ will use direct IO
+ *   %0: NFS READ will use buffered IO
+ *   %1: NFS READ will use dontcache (buffered IO w/ dropbehind)
+ *   %2: NFS READ will use direct IO
  *
- * The default value of this setting is zero (UNSPECIFIED).
  * This setting takes immediate effect for all NFS versions,
  * all exports, and in all NFSD net namespaces.
  */
@@ -90,11 +89,10 @@ DEFINE_DEBUGFS_ATTRIBUTE(nfsd_io_cache_read_fops, nfsd_io_cache_read_get,
  * /sys/kernel/debug/nfsd/io_cache_write
  *
  * Contents:
- *   %1: NFS WRITE will use buffered IO
- *   %2: NFS WRITE will use dontcache (buffered IO w/ dropbehind)
- *   %3: NFS WRITE will use direct IO
+ *   %0: NFS WRITE will use buffered IO
+ *   %1: NFS WRITE will use dontcache (buffered IO w/ dropbehind)
+ *   %2: NFS WRITE will use direct IO
  *
- * The default value of this setting is zero (UNSPECIFIED).
  * This setting takes immediate effect for all NFS versions,
  * all exports, and in all NFSD net namespaces.
  */
diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
index fe935b4cda538..412a1e9a2a876 100644
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -154,8 +154,7 @@ static inline void nfsd_debugfs_exit(void) {}
 extern bool nfsd_disable_splice_read __read_mostly;
 
 enum {
-	NFSD_IO_UNSPECIFIED = 0,
-	NFSD_IO_BUFFERED,
+	NFSD_IO_BUFFERED = 0,
 	NFSD_IO_DONTCACHE,
 	NFSD_IO_DIRECT,
 };
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 5e700a0d6b12e..403076443573f 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -50,8 +50,8 @@
 #define NFSDDBG_FACILITY		NFSDDBG_FILEOP
 
 bool nfsd_disable_splice_read __read_mostly;
-u64 nfsd_io_cache_read __read_mostly;
-u64 nfsd_io_cache_write __read_mostly;
+u64 nfsd_io_cache_read __read_mostly = NFSD_IO_BUFFERED;
+u64 nfsd_io_cache_write __read_mostly = NFSD_IO_BUFFERED;
 
 /**
  * nfserrno - Map Linux errnos to NFS errnos
@@ -1272,8 +1272,7 @@ __be32 nfsd_iter_read(struct svc_rqst *rqstp, struct svc_fh *fhp,
 		break;
 	case NFSD_IO_DONTCACHE:
 		kiocb.ki_flags = IOCB_DONTCACHE;
-		fallthrough;
-	case NFSD_IO_UNSPECIFIED:
+		break;
 	case NFSD_IO_BUFFERED:
 		break;
 	}
@@ -1605,8 +1604,7 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp,
 		break;
 	case NFSD_IO_DONTCACHE:
 		kiocb.ki_flags |= IOCB_DONTCACHE;
-		fallthrough;
-	case NFSD_IO_UNSPECIFIED:
+		fallthrough; /* must call nfsd_issue_write_buffered */
 	case NFSD_IO_BUFFERED:
 		host_err = nfsd_issue_write_buffered(rqstp, file,
 						nvecs, cnt, &kiocb);

  reply	other threads:[~2025-09-03 16:02 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-26 18:57 [PATCH v8 0/7] NFSD: add "NFSD DIRECT" and "NFSD DONTCACHE" IO modes Mike Snitzer
2025-08-26 18:57 ` [PATCH v8 1/7] NFSD: filecache: add STATX_DIOALIGN and STATX_DIO_READ_ALIGN support Mike Snitzer
2025-08-26 18:57 ` [PATCH v8 2/7] NFSD: pass nfsd_file to nfsd_iter_read() Mike Snitzer
2025-08-26 18:57 ` [PATCH v8 3/7] NFSD: add io_cache_read controls to debugfs interface Mike Snitzer
2025-09-03 14:38   ` Chuck Lever
2025-09-03 15:07     ` Mike Snitzer
2025-09-03 16:02       ` Mike Snitzer [this message]
2025-09-03 16:12         ` Chuck Lever
2025-09-03 16:50           ` Mike Snitzer
2025-08-26 18:57 ` [PATCH v8 4/7] NFSD: add io_cache_write " Mike Snitzer
2025-08-26 18:57 ` [PATCH v8 5/7] NFSD: issue READs using O_DIRECT even if IO is misaligned Mike Snitzer
2025-08-27 15:34   ` Chuck Lever
2025-08-27 19:41     ` Mike Snitzer
2025-08-27 20:56       ` Chuck Lever
2025-08-27 23:15         ` Mike Snitzer
2025-08-28  1:57           ` Chuck Lever
2025-08-28  8:09             ` Mike Snitzer
2025-08-28 14:53               ` Chuck Lever
2025-08-28 18:52                 ` Mike Snitzer
2025-08-30 17:38                   ` [RFC PATCH 0/2] some progress on rpcrdma bug [was: Re: [PATCH v8 5/7] NFSD: issue READs using O_DIRECT even if IO is misaligned] Mike Snitzer
2025-08-30 17:38                     ` [RFC PATCH 1/2] NFSD: fix misaligned DIO READ to not use a start_extra_page, exposes rpcrdma bug? Mike Snitzer
2025-09-02 14:04                       ` Chuck Lever
2025-09-02 15:56                       ` Chuck Lever
2025-09-02 17:59                         ` Chuck Lever
2025-09-02 21:06                           ` Mike Snitzer
2025-09-02 21:16                             ` Chuck Lever
2025-09-02 21:27                               ` Mike Snitzer
2025-09-02 22:18                                 ` Mike Snitzer
2025-09-04 19:07                                   ` Chuck Lever
2025-09-04 21:00                                     ` Mike Snitzer
2025-09-04 14:42                                 ` Mike Snitzer
2025-09-04 15:12                                   ` Chuck Lever
2025-09-04 16:10                                   ` Chuck Lever
2025-09-04 16:33                                     ` Mike Snitzer
2025-09-04 17:54                                       ` Chuck Lever
2025-08-30 17:38                     ` [RFC PATCH 2/2] NFSD: use /end/ of rq_pages for front_pad page, simpler workaround for rpcrdma bug Mike Snitzer
2025-08-30 18:53                     ` [RFC PATCH 0/2] some progress on rpcrdma bug [was: Re: [PATCH v8 5/7] NFSD: issue READs using O_DIRECT even if IO is misaligned] Mike Snitzer
2025-08-28 16:36               ` [PATCH v8 5/7] NFSD: issue READs using O_DIRECT even if IO is misaligned Jeff Layton
2025-08-28 16:22       ` Jeff Layton
2025-08-28 16:27         ` Chuck Lever
2025-08-26 18:57 ` [PATCH v8 6/7] NFSD: issue WRITEs " Mike Snitzer
2025-08-26 18:57 ` [PATCH v8 7/7] NFSD: add nfsd_analyze_read_dio and nfsd_analyze_write_dio trace events Mike Snitzer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aLhmnwNasNnZIew1@kernel.org \
    --to=snitzer@kernel.org \
    --cc=chuck.lever@oracle.com \
    --cc=jlayton@kernel.org \
    --cc=linux-nfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.