From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Pooja Katiyar <pooja.katiyar@intel.com>
Cc: linux-usb@vger.kernel.org, gregkh@linuxfoundation.org,
dmitry.baryshkov@oss.qualcomm.com
Subject: Re: [PATCH v4 2/4] usb: typec: ucsi: Add support for message out data structure
Date: Mon, 15 Sep 2025 15:18:53 +0300 [thread overview]
Message-ID: <aMgELQ2IFw_cHpkO@kuha.fi.intel.com> (raw)
In-Reply-To: <429be91c2fdc038c266103083457ff9086e26d2e.1757374784.git.pooja.katiyar@intel.com>
On Tue, Sep 09, 2025 at 06:52:05PM -0700, Pooja Katiyar wrote:
> Add support for updating message out data structure for UCSI
> ACPI interface for UCSI 2.1 and UCSI 3.0 commands such as
> Set PDOs and LPM Firmware Update.
>
> Signed-off-by: Pooja Katiyar <pooja.katiyar@intel.com>
> ---
> Changelog v4:
> - Fixed build errors reported by kernel test robot.
> - Added changelogs.
I'm not sure anything has changed in this patch. The first patch was
the one with a problem. In any case:
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Changelog v3:
> - Added message_out fields to UCSI structure and updated sync_control
> to perform write operation.
> - Removed extra DSM Write call.
>
> Changelog v2:
> - Moved write_message_out operation to .sync_control.
> - Updated ucsi_send_command to accept message_out data.
>
> drivers/usb/typec/ucsi/ucsi.c | 14 ++++++++++++++
> drivers/usb/typec/ucsi/ucsi.h | 2 ++
> drivers/usb/typec/ucsi/ucsi_acpi.c | 16 ++++++++++++++++
> 3 files changed, 32 insertions(+)
>
> diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
> index 073b80cfa414..a82088554a40 100644
> --- a/drivers/usb/typec/ucsi/ucsi.c
> +++ b/drivers/usb/typec/ucsi/ucsi.c
> @@ -67,6 +67,20 @@ int ucsi_sync_control_common(struct ucsi *ucsi, u64 command, u32 *cci)
>
> reinit_completion(&ucsi->complete);
>
> + if (ucsi->message_out_size > 0) {
> + if (!ucsi->ops->write_message_out) {
> + ucsi->message_out_size = 0;
> + ret = -EOPNOTSUPP;
> + goto out_clear_bit;
> + }
> +
> + ret = ucsi->ops->write_message_out(ucsi, ucsi->message_out,
> + ucsi->message_out_size);
> + ucsi->message_out_size = 0;
> + if (ret)
> + goto out_clear_bit;
> + }
> +
> ret = ucsi->ops->async_control(ucsi, command);
> if (ret)
> goto out_clear_bit;
> diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
> index ba21fea53cb7..e6ca70f7fa1f 100644
> --- a/drivers/usb/typec/ucsi/ucsi.h
> +++ b/drivers/usb/typec/ucsi/ucsi.h
> @@ -69,6 +69,7 @@ struct dentry;
> * @read_cci: Read CCI register
> * @poll_cci: Read CCI register while polling with notifications disabled
> * @read_message_in: Read message data from UCSI
> + * @write_message_out: Write message data to UCSI
> * @sync_control: Blocking control operation
> * @async_control: Non-blocking control operation
> * @update_altmodes: Squashes duplicate DP altmodes
> @@ -84,6 +85,7 @@ struct ucsi_operations {
> int (*read_cci)(struct ucsi *ucsi, u32 *cci);
> int (*poll_cci)(struct ucsi *ucsi, u32 *cci);
> int (*read_message_in)(struct ucsi *ucsi, void *val, size_t val_len);
> + int (*write_message_out)(struct ucsi *ucsi, void *data, size_t data_len);
> int (*sync_control)(struct ucsi *ucsi, u64 command, u32 *cci);
> int (*async_control)(struct ucsi *ucsi, u64 command);
> bool (*update_altmodes)(struct ucsi *ucsi, u8 recipient,
> diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c
> index f1d1f6917b09..f9beeb835238 100644
> --- a/drivers/usb/typec/ucsi/ucsi_acpi.c
> +++ b/drivers/usb/typec/ucsi/ucsi_acpi.c
> @@ -86,6 +86,21 @@ static int ucsi_acpi_read_message_in(struct ucsi *ucsi, void *val, size_t val_le
> return 0;
> }
>
> +static int ucsi_acpi_write_message_out(struct ucsi *ucsi, void *data, size_t data_len)
> +{
> + struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi);
> +
> + if (!data || !data_len)
> + return -EINVAL;
> +
> + if (ucsi->version <= UCSI_VERSION_1_2)
> + memcpy(ua->base + UCSI_MESSAGE_OUT, data, data_len);
> + else
> + memcpy(ua->base + UCSIv2_MESSAGE_OUT, data, data_len);
> +
> + return 0;
> +}
> +
> static int ucsi_acpi_async_control(struct ucsi *ucsi, u64 command)
> {
> struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi);
> @@ -101,6 +116,7 @@ static const struct ucsi_operations ucsi_acpi_ops = {
> .read_cci = ucsi_acpi_read_cci,
> .poll_cci = ucsi_acpi_poll_cci,
> .read_message_in = ucsi_acpi_read_message_in,
> + .write_message_out = ucsi_acpi_write_message_out,
> .sync_control = ucsi_sync_control_common,
> .async_control = ucsi_acpi_async_control
> };
> --
> 2.43.0
--
heikki
next prev parent reply other threads:[~2025-09-15 12:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-10 1:52 [PATCH v4 0/4] usb: typec: ucsi: Add support for SET_PDOS command Pooja Katiyar
2025-09-10 1:52 ` [PATCH v4 1/4] usb: typec: ucsi: Update UCSI structure to have message in and message out fields Pooja Katiyar
2025-09-15 12:16 ` Heikki Krogerus
2025-09-10 1:52 ` [PATCH v4 2/4] usb: typec: ucsi: Add support for message out data structure Pooja Katiyar
2025-09-15 12:18 ` Heikki Krogerus [this message]
2025-09-10 1:52 ` [PATCH v4 3/4] usb: typec: ucsi: Enable debugfs for message_out " Pooja Katiyar
2025-09-15 12:20 ` Heikki Krogerus
2025-09-10 1:52 ` [PATCH v4 4/4] usb: typec: ucsi: Add support for SET_PDOS command Pooja Katiyar
2025-09-15 12:21 ` Heikki Krogerus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aMgELQ2IFw_cHpkO@kuha.fi.intel.com \
--to=heikki.krogerus@linux.intel.com \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=pooja.katiyar@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.