Re: [PATCH v2] serial: qcom_geni: Fix pinctrl deadlock on runtime resume

[Jorge Ramirez <jorge.ramirez@oss.qualcomm.com>]

On 18/09/25 09:25:53, Praveen Talari wrote:
> Hi Krzysztof,
> 
> On 9/18/2025 5:28 AM, Krzysztof Kozlowski wrote:
> > On 18/09/2025 03:51, Praveen Talari wrote:
> > > A stall was observed in disable_irq() during
> > > pinctrl_pm_select_default_state(), triggered by wakeup IRQ being active
> > > while the UART port was not yet active. This led to a hang in
> > > __synchronize_irq(), as shown in the following trace:
> > > 
> > > Call trace:
> > >      __switch_to+0xe0/0x120
> > >      __schedule+0x39c/0x978
> > >      schedule+0x5c/0xf8
> > >      __synchronize_irq+0x88/0xb4
> > >      disable_irq+0x3c/0x4c
> > >      msm_pinmux_set_mux+0x508/0x644
> > >      pinmux_enable_setting+0x190/0x2dc
> > >      pinctrl_commit_state+0x13c/0x208
> > >      pinctrl_pm_select_default_state+0x4c/0xa4
> > >      geni_se_resources_on+0xe8/0x154
> > >      qcom_geni_serial_runtime_resume+0x4c/0x88
> > >      pm_generic_runtime_resume+0x2c/0x44
> > >      __genpd_runtime_resume+0x30/0x80
> > >      genpd_runtime_resume+0x114/0x29c
> > >      __rpm_callback+0x48/0x1d8
> > >      rpm_callback+0x6c/0x78
> > >      rpm_resume+0x530/0x750
> > >      __pm_runtime_resume+0x50/0x94
> > >      handle_threaded_wake_irq+0x30/0x94
> > >      irq_thread_fn+0x2c/0xa8
> > >      irq_thread+0x160/0x248
> > >      kthread+0x110/0x114
> > >      ret_from_fork+0x10/0x20
> > > 
> > > To fix this, wakeup IRQ setup is moved from probe to UART startup,
> > > ensuring it is only configured when the port is active. Correspondingly,
> > > the wakeup IRQ is cleared during shutdown. This avoids premature IRQ
> > > disable during pinctrl setup and prevents the observed stall. The probe
> > > and remove pathsare simplified by removing redundant wakeup IRQ handling.
> > > 
> > > Fixes: 1afa70632c39 ("serial: qcom-geni: Enable PM runtime for serial driver")
> > > Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
> > > Closes: https://lore.kernel.org/all/DC0D53ZTNOBU.E8LSD5E5Z8TX@linaro.org/
> > > Tested-by: Jorge Ramirez <jorge.ramirez@oss.qualcomm.com>
> > 
> > Where did you receive this tag for this patch exactly?
> 
> Since Jorge was involved in validating the change, I’ve added him under the
> Tested-by tag.
> 
> Please correct me if I’m not supposed to add this tag myself.

let's test a bit further Praveen - we need to validate/trace the wake
path on a real scenairo to make sure it is not cpu intensive (although I
suspect the 2% was due to the storm you described more than to the code
path itself)

I can then provide the tested-by on the list.