From: Sultan Alsawaf <sultan@kerneltoast.com>
To: Bin Du <Bin.Du@amd.com>
Cc: mchehab@kernel.org, hverkuil@xs4all.nl,
laurent.pinchart+renesas@ideasonboard.com,
bryan.odonoghue@linaro.org, sakari.ailus@linux.intel.com,
prabhakar.mahadev-lad.rj@bp.renesas.com,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
pratap.nirujogi@amd.com, benjamin.chan@amd.com, king.li@amd.com,
gjorgji.rosikopulos@amd.com, Phil.Jawich@amd.com,
Dominic.Antony@amd.com, mario.limonciello@amd.com,
richard.gong@amd.com, anson.tsao@amd.com,
Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>,
Mario Limonciello <superm1@kernel.org>,
Alexey Zagorodnikov <xglooom@gmail.com>
Subject: Re: [PATCH v4 1/7] media: platform: amd: Introduce amd isp4 capture driver
Date: Sun, 21 Sep 2025 13:23:37 -0700 [thread overview]
Message-ID: <aNBeyf5ivmqXwzbj@sultan-box> (raw)
In-Reply-To: <20250911100847.277408-2-Bin.Du@amd.com>
Hi Bin,
On Thu, Sep 11, 2025 at 06:08:41PM +0800, Bin Du wrote:
> AMD isp4 capture is a v4l2 media device which implements media controller
> interface. It has one sub-device (AMD ISP4 sub-device) endpoint which can
> be connected to a remote CSI2 TX endpoint. It supports only one physical
> interface for now. Also add ISP4 driver related entry info into the
> MAINTAINERS file
>
> Co-developed-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
> Signed-off-by: Svetoslav Stoilov <Svetoslav.Stoilov@amd.com>
> Signed-off-by: Bin Du <Bin.Du@amd.com>
> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
> Tested-by: Alexey Zagorodnikov <xglooom@gmail.com>
[snip]
> +++ b/drivers/media/platform/amd/isp4/Kconfig
> @@ -0,0 +1,13 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +
> +config AMD_ISP4
> + tristate "AMD ISP4 and camera driver"
> + depends on VIDEO_DEV && VIDEO_V4L2_SUBDEV_API && DRM_AMD_ISP
> + select VIDEOBUF2_CORE
> + select VIDEOBUF2_V4L2
> + select VIDEOBUF2_MEMOPS
VIDEO_V4L2_SUBDEV_API should be selected rather than set as a dependency, per
what other drivers do. You can also sort the dependencies to look cleaner.
Change to:
depends on VIDEO_DEV && DRM_AMD_ISP
select VIDEOBUF2_CORE
select VIDEOBUF2_MEMOPS
select VIDEOBUF2_V4L2
select VIDEO_V4L2_SUBDEV_API
> + help
> + This is support for AMD ISP4 and camera subsystem driver.
> + Say Y here to enable the ISP4 and camera device for video capture.
> + To compile this driver as a module, choose M here. The module will
> + be called amd_capture.
[snip]
> +++ b/drivers/media/platform/amd/isp4/isp4.c
> @@ -0,0 +1,121 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2025 Advanced Micro Devices, Inc.
> + */
> +
> +#include <linux/pm_runtime.h>
> +#include <linux/vmalloc.h>
> +#include <media/v4l2-ioctl.h>
> +
> +#include "isp4.h"
> +
> +#define VIDEO_BUF_NUM 5
> +
> +#define ISP4_DRV_NAME "amd_isp_capture"
> +
> +/* interrupt num */
> +static const u32 isp4_ringbuf_interrupt_num[] = {
> + 0, /* ISP_4_1__SRCID__ISP_RINGBUFFER_WPT9 */
> + 1, /* ISP_4_1__SRCID__ISP_RINGBUFFER_WPT10 */
> + 3, /* ISP_4_1__SRCID__ISP_RINGBUFFER_WPT11 */
> + 4, /* ISP_4_1__SRCID__ISP_RINGBUFFER_WPT12 */
> +};
> +
> +#define to_isp4_device(dev) \
> + ((struct isp4_device *)container_of(dev, struct isp4_device, v4l2_dev))
The unnecessary cast on container_of() is removed later in "[PATCH v4 4/7]
media: platform: amd: isp4 subdev and firmware loading handling added".
Remove the cast in this patch instead.
> +
> +static irqreturn_t isp4_irq_handler(int irq, void *arg)
> +{
> + return IRQ_HANDLED;
> +}
> +
> +static int isp4_capture_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct isp4_device *isp_dev;
> + int i, irq, ret;
> +
> + isp_dev = devm_kzalloc(&pdev->dev, sizeof(*isp_dev), GFP_KERNEL);
s/&pdev->dev/dev/
> + if (!isp_dev)
> + return -ENOMEM;
> +
> + isp_dev->pdev = pdev;
> + dev->init_name = ISP4_DRV_NAME;
> +
> + for (i = 0; i < ARRAY_SIZE(isp4_ringbuf_interrupt_num); i++) {
> + irq = platform_get_irq(pdev, isp4_ringbuf_interrupt_num[i]);
> + if (irq < 0)
> + return dev_err_probe(dev, -ENODEV,
> + "fail to get irq %d\n",
> + isp4_ringbuf_interrupt_num[i]);
Return the error from platform_get_irq() here instead of -ENODEV.
> + ret = devm_request_irq(&pdev->dev, irq, isp4_irq_handler, 0,
> + "ISP_IRQ", &pdev->dev);
s/&pdev->dev/dev/
> + if (ret)
> + return dev_err_probe(dev, ret, "fail to req irq %d\n",
> + irq);
> + }
> +
> + /* Link the media device within the v4l2_device */
> + isp_dev->v4l2_dev.mdev = &isp_dev->mdev;
> +
> + /* Initialize media device */
> + strscpy(isp_dev->mdev.model, "amd_isp41_mdev",
> + sizeof(isp_dev->mdev.model));
> + snprintf(isp_dev->mdev.bus_info, sizeof(isp_dev->mdev.bus_info),
> + "platform:%s", ISP4_DRV_NAME);
> + isp_dev->mdev.dev = &pdev->dev;
s/&pdev->dev/dev/
> + media_device_init(&isp_dev->mdev);
> +
> + /* register v4l2 device */
> + snprintf(isp_dev->v4l2_dev.name, sizeof(isp_dev->v4l2_dev.name),
> + "AMD-V4L2-ROOT");
> + ret = v4l2_device_register(&pdev->dev, &isp_dev->v4l2_dev);
s/&pdev->dev/dev/
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "fail register v4l2 device\n");
> +
> + ret = media_device_register(&isp_dev->mdev);
> + if (ret) {
> + dev_err(dev, "fail to register media device %d\n", ret);
> + goto err_unreg_v4l2;
> + }
> +
> + platform_set_drvdata(pdev, isp_dev);
> +
> + pm_runtime_set_suspended(dev);
> + pm_runtime_enable(dev);
> +
> + return 0;
> +
> +err_unreg_v4l2:
> + v4l2_device_unregister(&isp_dev->v4l2_dev);
> +
> + return dev_err_probe(dev, ret, "isp probe fail\n");
> +}
[snip]
> +++ b/drivers/media/platform/amd/isp4/isp4.h
> @@ -0,0 +1,24 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (C) 2025 Advanced Micro Devices, Inc.
> + */
> +
> +#ifndef _ISP4_H_
> +#define _ISP4_H_
> +
> +#include <linux/mutex.h>
Remove this linux/mutex.h include. It should be moved to isp4_subdev.h instead.
> +#include <media/v4l2-device.h>
> +#include <media/videobuf2-memops.h>
> +#include <media/videobuf2-vmalloc.h>
This media/videobuf2-vmalloc.h include is removed in "[PATCH v4 4/7] media:
platform: amd: isp4 subdev and firmware loading handling added".
Remove it in this patch instead.
> +
> +#define ISP4_GET_ISP_REG_BASE(isp4sd) (((isp4sd))->mmio)
> +
> +struct isp4_device {
> + struct v4l2_device v4l2_dev;
> + struct media_device mdev;
> +
> + struct platform_device *pdev;
> + struct notifier_block i2c_nb;
i2c_nb is unused, remove it.
> +};
> +
> +#endif /* _ISP4_H_ */
> --
> 2.34.1
>
Sultan
next prev parent reply other threads:[~2025-09-21 20:23 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-11 10:08 [PATCH v4 0/7] Add AMD ISP4 driver Bin Du
2025-09-11 10:08 ` [PATCH v4 1/7] media: platform: amd: Introduce amd isp4 capture driver Bin Du
2025-09-21 20:23 ` Sultan Alsawaf [this message]
2025-09-23 7:56 ` Du, Bin
2025-09-11 10:08 ` [PATCH v4 2/7] media: platform: amd: low level support for isp4 firmware Bin Du
2025-09-21 20:31 ` Sultan Alsawaf
2025-09-23 8:05 ` Du, Bin
2025-09-11 10:08 ` [PATCH v4 3/7] media: platform: amd: Add isp4 fw and hw interface Bin Du
2025-09-21 21:55 ` Sultan Alsawaf
2025-09-23 9:24 ` Du, Bin
2025-09-24 7:09 ` Sultan Alsawaf
2025-09-25 3:56 ` Du, Bin
2025-09-25 7:20 ` Sultan Alsawaf
2025-09-25 9:42 ` Du, Bin
2025-09-11 10:08 ` [PATCH v4 4/7] media: platform: amd: isp4 subdev and firmware loading handling added Bin Du
2025-09-23 7:23 ` Sultan Alsawaf
2025-09-30 7:30 ` Du, Bin
2025-10-01 7:24 ` Sultan Alsawaf
2025-10-10 10:25 ` Du, Bin
2025-10-11 7:18 ` Sultan Alsawaf
2025-10-11 8:27 ` Du, Bin
2025-09-11 10:08 ` [PATCH v4 5/7] media: platform: amd: isp4 video node and buffers " Bin Du
2025-10-01 6:53 ` Sultan Alsawaf
2025-10-11 9:30 ` Du, Bin
2025-10-12 6:08 ` Sultan Alsawaf
2025-10-13 9:55 ` Du, Bin
2025-10-16 8:13 ` Du, Bin
2025-10-17 8:34 ` Sultan Alsawaf
2025-10-17 9:53 ` Du, Bin
2025-10-19 22:11 ` Sultan Alsawaf
2025-09-11 10:08 ` [PATCH v4 6/7] media: platform: amd: isp4 debug fs logging and more descriptive errors Bin Du
2025-09-11 10:08 ` [PATCH v4 7/7] Documentation: add documentation of AMD isp 4 driver Bin Du
2025-09-19 3:24 ` [PATCH v4 0/7] Add AMD ISP4 driver Du, Bin
2025-09-19 12:23 ` Laurent Pinchart
2025-09-22 2:50 ` Du, Bin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aNBeyf5ivmqXwzbj@sultan-box \
--to=sultan@kerneltoast.com \
--cc=Bin.Du@amd.com \
--cc=Dominic.Antony@amd.com \
--cc=Phil.Jawich@amd.com \
--cc=Svetoslav.Stoilov@amd.com \
--cc=anson.tsao@amd.com \
--cc=benjamin.chan@amd.com \
--cc=bryan.odonoghue@linaro.org \
--cc=gjorgji.rosikopulos@amd.com \
--cc=hverkuil@xs4all.nl \
--cc=king.li@amd.com \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=mchehab@kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=pratap.nirujogi@amd.com \
--cc=richard.gong@amd.com \
--cc=sakari.ailus@linux.intel.com \
--cc=superm1@kernel.org \
--cc=xglooom@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.