From: Vishal Chourasia <vishalc@linux.ibm.com>
To: BALATON Zoltan <balaton@eik.bme.hu>
Cc: adityag@linux.ibm.com, harshpb@linux.ibm.com,
milesg@linux.ibm.com, npiggin@gmail.com,
peter.maydell@linaro.org, alistair23@gmail.com,
qemu-devel@nongnu.org, qemu-ppc@nongnu.org, berrange@redhat.com,
richard.henderson@linaro.org, alistair@alistair23.me,
alex.bennee@linaro.org, deller@gmx.de, pbonzini@redhat.com,
eduardo@habkost.net, minyard@acm.org, gaosong@loongson.cn,
maobibo@loongson.cn, laurent@vivier.eu, edgar.iglesias@gmail.com,
hpoussin@reactos.org, david@redhat.com, chigot@adacore.com,
konrad.frederic@yahoo.fr, atar4qemu@gmail.com,
jcmvbkbc@gmail.com
Subject: Re: [Patch v4 1/5] hw/core/loader: capture Error from load_image_targphys
Date: Tue, 21 Oct 2025 14:01:45 +0530 [thread overview]
Message-ID: <aPdE8Wff6L8i4ybB@linux.ibm.com> (raw)
In-Reply-To: <0026ec98-fa2b-7bf2-e40e-b8938b4f8c6f@eik.bme.hu>
On Fri, Oct 17, 2025 at 09:25:41PM +0200, BALATON Zoltan wrote:
> On Fri, 17 Oct 2025, Vishal Chourasia wrote:
> > Add Error **errp parameter to load_image_targphys(),
> > load_image_targphys_as(), and get_image_size() to enable better
> > error reporting when image loading fails.
> >
> > Pass NULL for errp in all existing call sites to maintain current
> > behavior. No functional change intended in this patch.
> >
> > Suggested-by: Peter Maydell <peter.maydell@linaro.org>
> > Signed-off-by: Vishal Chourasia <vishalc@linux.ibm.com>
> > ---
> > hw/alpha/dp264.c | 4 ++--
> > hw/arm/armv7m.c | 2 +-
> > hw/arm/boot.c | 5 +++--
> > hw/arm/digic_boards.c | 2 +-
> > hw/arm/highbank.c | 3 ++-
> > hw/arm/raspi.c | 2 +-
> > hw/arm/vexpress.c | 2 +-
> > hw/core/generic-loader.c | 3 ++-
> > hw/core/guest-loader.c | 2 +-
> > hw/core/loader.c | 40 ++++++++++++++++++++++++++++++++--------
> > hw/hppa/machine.c | 5 +++--
> > hw/i386/multiboot.c | 2 +-
> > hw/i386/x86-common.c | 4 ++--
> > hw/ipmi/ipmi_bmc_sim.c | 2 +-
> > hw/loongarch/boot.c | 5 ++---
> > hw/m68k/an5206.c | 2 +-
> > hw/m68k/mcf5208.c | 4 ++--
> > hw/m68k/next-cube.c | 2 +-
> > hw/m68k/q800.c | 7 ++++---
> > hw/m68k/virt.c | 4 ++--
> > hw/microblaze/boot.c | 5 +++--
> > hw/mips/boston.c | 2 +-
> > hw/mips/fuloong2e.c | 9 +++++----
> > hw/mips/jazz.c | 2 +-
> > hw/mips/loongson3_virt.c | 10 ++++++----
> > hw/mips/malta.c | 9 +++++----
> > hw/nubus/nubus-device.c | 2 +-
> > hw/openrisc/boot.c | 5 +++--
> > hw/pci/pci.c | 2 +-
> > hw/ppc/amigaone.c | 4 ++--
> > hw/ppc/e500.c | 5 +++--
> > hw/ppc/mac_newworld.c | 9 ++++++---
> > hw/ppc/mac_oldworld.c | 9 ++++++---
> > hw/ppc/pegasos2.c | 5 +++--
> > hw/ppc/pnv.c | 9 ++++++---
> > hw/ppc/ppc440_bamboo.c | 3 ++-
> > hw/ppc/prep.c | 8 +++++---
> > hw/ppc/sam460ex.c | 3 ++-
> > hw/ppc/spapr.c | 8 ++++----
> > hw/ppc/virtex_ml507.c | 5 +++--
> > hw/riscv/boot.c | 7 ++++---
> > hw/rx/rx-gdbsim.c | 2 +-
> > hw/s390x/ipl.c | 8 +++++---
> > hw/sh4/r2d.c | 8 +++++---
> > hw/smbios/smbios.c | 2 +-
> > hw/sparc/leon3.c | 4 ++--
> > hw/sparc/sun4m.c | 8 +++++---
> > hw/sparc64/sun4u.c | 7 ++++---
> > hw/xtensa/xtfpga.c | 3 ++-
> > include/hw/loader.h | 8 +++++---
> > system/device_tree.c | 2 +-
> > 51 files changed, 168 insertions(+), 107 deletions(-)
> [...]
>
> > diff --git a/hw/core/loader.c b/hw/core/loader.c
> > index 477661a025..e40cba1b9f 100644
> > --- a/hw/core/loader.c
> > +++ b/hw/core/loader.c
> > @@ -48,6 +48,7 @@
> > #include "qapi/error.h"
> > #include "qapi/qapi-commands-machine.h"
> > #include "qapi/type-helpers.h"
> > +#include "qemu/units.h"
> > #include "trace.h"
> > #include "hw/hw.h"
> > #include "disas/disas.h"
> > @@ -61,23 +62,31 @@
> > #include "hw/nvram/fw_cfg.h"
> > #include "system/memory.h"
> > #include "hw/boards.h"
> > +#include "qapi/error.h"
> > #include "qemu/cutils.h"
> > #include "system/runstate.h"
> > #include "tcg/debuginfo.h"
> >
> > +#include <errno.h>
> > #include <zlib.h>
> >
> > static int roms_loaded;
> >
> > /* return the size or -1 if error */
> > -int64_t get_image_size(const char *filename)
> > +int64_t get_image_size(const char *filename, Error **errp)
> > {
> > int fd;
> > int64_t size;
> > fd = open(filename, O_RDONLY | O_BINARY);
> > - if (fd < 0)
> > + if (fd < 0) {
> > + error_setg_file_open(errp, errno, filename);
> > return -1;
> > + }
> > size = lseek(fd, 0, SEEK_END);
> > + if (size < 0) {
> > + error_setg_errno(errp, errno, "lseek failure: %s", filename);
> > + return -1;
> > + }
> > close(fd);
> > return size;
> > }
> > @@ -118,23 +127,38 @@ ssize_t read_targphys(const char *name,
> > }
> >
> > ssize_t load_image_targphys(const char *filename,
> > - hwaddr addr, uint64_t max_sz)
> > + hwaddr addr, uint64_t max_sz, Error **errp)
> > {
> > - return load_image_targphys_as(filename, addr, max_sz, NULL);
> > + return load_image_targphys_as(filename, addr, max_sz, NULL, errp);
> > }
> >
> > /* return the size or -1 if error */
> > ssize_t load_image_targphys_as(const char *filename,
> > - hwaddr addr, uint64_t max_sz, AddressSpace *as)
> > + hwaddr addr, uint64_t max_sz, AddressSpace *as,
> > + Error **errp)
> > {
> > + ERRP_GUARD();
> > ssize_t size;
> >
> > - size = get_image_size(filename);
> > - if (size < 0 || size > max_sz) {
> > + size = get_image_size(filename, errp);
> > + if (*errp) {
> > return -1;
> > }
> > +
> > + if (size == 0) {
> > + error_setg(errp, "empty file");
> > + return -1;
> > + }
> > +
> > + if (size > max_sz) {
> > + error_setg(errp, "%s exceeds maximum image size (%" PRIu64 " MiB)",
> > + filename, (long unsigned int) max_sz / MiB);
> > + return -1;
> > + }
> > +
> > if (size > 0) {
> > if (rom_add_file_fixed_as(filename, addr, -1, as) < 0) {
> > + error_setg(errp, "failed to add file as ROM");
> > return -1;
>
> These in this file are functional changes adding new messages so that
> contradicts the commmit message and maybe should be in its own patch for
> easier review.
Sure, I will split it into separate patch.
Thanks
vishalc
next prev parent reply other threads:[~2025-10-21 8:33 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-17 18:12 [Patch v4 0/5] hw/core/loader: capture Error from load_image_targphys Vishal Chourasia
2025-10-17 18:12 ` [Patch v4 1/5] " Vishal Chourasia
2025-10-17 19:25 ` BALATON Zoltan
2025-10-21 8:31 ` Vishal Chourasia [this message]
2025-10-17 18:12 ` [Patch v4 2/5] hw/core/loader: Use qemu_open() instead of open() in get_image_size() Vishal Chourasia
2025-10-17 19:27 ` BALATON Zoltan
2025-10-17 18:12 ` [Patch v4 3/5] hw/core: Pass errp to load_image_targphys_as() Vishal Chourasia
2025-10-17 18:12 ` [Patch v4 4/5] hw/ppc/spapr: Rename resize_hpt_err to errp Vishal Chourasia
2025-10-17 18:24 ` [Patch v4 5/5] hw/ppc: Pass errp to load_image_targphys() and report errors Vishal Chourasia
2025-10-17 19:41 ` BALATON Zoltan
2025-10-21 8:36 ` Vishal Chourasia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aPdE8Wff6L8i4ybB@linux.ibm.com \
--to=vishalc@linux.ibm.com \
--cc=adityag@linux.ibm.com \
--cc=alex.bennee@linaro.org \
--cc=alistair23@gmail.com \
--cc=alistair@alistair23.me \
--cc=atar4qemu@gmail.com \
--cc=balaton@eik.bme.hu \
--cc=berrange@redhat.com \
--cc=chigot@adacore.com \
--cc=david@redhat.com \
--cc=deller@gmx.de \
--cc=edgar.iglesias@gmail.com \
--cc=eduardo@habkost.net \
--cc=gaosong@loongson.cn \
--cc=harshpb@linux.ibm.com \
--cc=hpoussin@reactos.org \
--cc=jcmvbkbc@gmail.com \
--cc=konrad.frederic@yahoo.fr \
--cc=laurent@vivier.eu \
--cc=maobibo@loongson.cn \
--cc=milesg@linux.ibm.com \
--cc=minyard@acm.org \
--cc=npiggin@gmail.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.