All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org,
	jouni.hogander@intel.com
Subject: Re: [PATCH 2/5] drm/i915/dp: Allow AS_SDP only if panel replay + auxless alpm is supported
Date: Thu, 30 Oct 2025 10:23:32 +0200	[thread overview]
Message-ID: <aQMghHM7AJAU6m0m@intel.com> (raw)
In-Reply-To: <20251030051755.3071648-3-ankit.k.nautiyal@intel.com>

On Thu, Oct 30, 2025 at 10:47:52AM +0530, Ankit Nautiyal wrote:
> Adaptive Sync SDP is required when Panel replay is active and for
> supporting VRR on PCON.
> 
> Since VRR on PCON still needs some effort, enable adaptive sync SDP only
> when Panel replay with ALPM-Auxless is supported.

AFAICS we don't actually check for PCON vs. not anywhere, and thus
we are in fact allowing VRR with PCON. Or am I missign some check
somewhere?

> 
> Set the AS_SDP mode for Fixed Vtotal mode for fixed refresh rate case.
> 
> v2: Remove redundant target_rr assignments. (Ville)
> 
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dp.c | 15 ++++++++++++---
>  1 file changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index c013eb2e18a1..b5b855453845 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2934,7 +2934,15 @@ static void intel_dp_compute_as_sdp(struct intel_dp *intel_dp,
>  	const struct drm_display_mode *adjusted_mode =
>  		&crtc_state->hw.adjusted_mode;
>  
> -	if (!crtc_state->vrr.enable || !intel_dp->as_sdp_supported)
> +	if (!intel_dp->as_sdp_supported)
> +		return;
> +
> +	/*
> +	 * Support Adaptive-Sync SDP only for PR+AUX-less ALPM for now.
> +	 * It can be enabled for PCON + VRR, but that is currently not supported.
> +	 */
> +	if (!CAN_PANEL_REPLAY(intel_dp) ||
> +	    !intel_alpm_aux_less_wake_supported(intel_dp))
>  		return;
>  
>  	crtc_state->infoframes.enable |= intel_hdmi_infoframe_enable(DP_SDP_ADAPTIVE_SYNC);
> @@ -2948,9 +2956,10 @@ static void intel_dp_compute_as_sdp(struct intel_dp *intel_dp,
>  		as_sdp->mode = DP_AS_SDP_FAVT_TRR_REACHED;
>  		as_sdp->target_rr = drm_mode_vrefresh(adjusted_mode);
>  		as_sdp->target_rr_divider = true;
> -	} else {
> +	} else if (crtc_state->vrr.enable) {
>  		as_sdp->mode = DP_AS_SDP_AVT_DYNAMIC_VTOTAL;
> -		as_sdp->target_rr = 0;
> +	} else {
> +		as_sdp->mode = DP_AS_SDP_AVT_FIXED_VTOTAL;
>  	}
>  }
>  
> -- 
> 2.45.2

-- 
Ville Syrjälä
Intel

  reply	other threads:[~2025-10-30  8:23 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-30  5:17 [PATCH 0/5] Fix Adaptive Sync SDP for Panel Replay Ankit Nautiyal
2025-10-30  5:17 ` [PATCH 1/5] drm/i915/dp: Fix readback for target_rr in Adaptive Sync SDP Ankit Nautiyal
2025-10-30  8:18   ` Ville Syrjälä
2025-10-30  9:28     ` Nautiyal, Ankit K
2025-10-30  5:17 ` [PATCH 2/5] drm/i915/dp: Allow AS_SDP only if panel replay + auxless alpm is supported Ankit Nautiyal
2025-10-30  8:23   ` Ville Syrjälä [this message]
2025-10-30  9:32     ` Nautiyal, Ankit K
2025-10-30  5:17 ` [PATCH 3/5] drm/i915/display: Take into account AS SDP in intel_dp_sdp_min_guardband Ankit Nautiyal
2025-10-30  5:17 ` [PATCH 4/5] drm/i915/alpm: Compute LOBF late after guardband is already determined Ankit Nautiyal
2025-10-30  5:17 ` [PATCH 5/5] drm/i915/alpm: Allow LOBF only if window1 > alpm check_entry lines Ankit Nautiyal
2025-10-30 10:35   ` Ville Syrjälä
2025-10-30 13:15     ` Nautiyal, Ankit K

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aQMghHM7AJAU6m0m@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=jouni.hogander@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.