Re: [PATCH v2 6/7] arm64: dts: qcom: Add device tree for TUXEDO Elite 14 Gen1

[Stephan Gerhold <stephan.gerhold@linaro.org>]

On Mon, Nov 10, 2025 at 10:11:12PM -0600, Bjorn Andersson wrote:
> On Mon, Nov 10, 2025 at 02:41:15PM +0100, Stephan Gerhold wrote:
> > On Wed, Nov 05, 2025 at 04:41:06PM +0100, Georg Gottleuber wrote:
> > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> [..]
> > > +x1e80100-tuxedo-elite-14-gen1-el2-dtbs	:=  x1e80100-tuxedo-elite-14-gen1.dtb x1-el2.dtbo
> > > +dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-tuxedo-elite-14-gen1.dtb
> > 
> > Please also add x1e80100-tuxedo-elite-14-gen1-el2.dtb here (similar to
> > the other lines), so that the EL2/KVM-specific DTB is automatically
> > built and included in the installed DTBs.
> > 
> 
> Please confirm that this works before adding it.
> 

Yes, I tested it on the TUXEDO laptop a few weeks ago and it works fine.

In general, I don't think we need to ask everyone submitting new X1E DTs
to test the -el2.dtb separately - the hardware/firmware situation is
similar enough on all the laptops that chances are very high that it
will just work. There are not much device-specific aspects involved.

Thanks,
Stephan