[PATCH] regulator: pca9450: Fix error code in probe()

[Dan Carpenter <dan.carpenter@linaro.org>]

Return "PTR_ERR(pca9450->sd_vsel_gpio)" instead of "ret".  The "ret"
variable is success at this point.

Fixes: 3ce6f4f943dd ("regulator: pca9450: Fix control register for LDO5")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
---
 drivers/regulator/pca9450-regulator.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 93154c9c98dd..32780c311ccd 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -1401,10 +1401,9 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
 	 * to this signal (if SION bit is set in IOMUX).
 	 */
 	pca9450->sd_vsel_gpio = gpiod_get_optional(&ldo5->dev, "sd-vsel", GPIOD_IN);
-	if (IS_ERR(pca9450->sd_vsel_gpio)) {
-		dev_err(&i2c->dev, "Failed to get SD_VSEL GPIO\n");
-		return ret;
-	}
+	if (IS_ERR(pca9450->sd_vsel_gpio))
+		return dev_err_probe(&i2c->dev, PTR_ERR(pca9450->sd_vsel_gpio),
+				     "Failed to get SD_VSEL GPIO\n");
 
 	pca9450->sd_vsel_fixed_low =
 		of_property_read_bool(ldo5->dev.of_node, "nxp,sd-vsel-fixed-low");
-- 
2.51.0