From: Raag Jadav <raag.jadav@intel.com>
To: "Anirban, Sk" <sk.anirban@intel.com>
Cc: intel-gfx@lists.freedesktop.org, krzysztof.karas@intel.com
Subject: Re: [PATCH v3] drm/i915/selftest: Add throttle reason diagnostics to RPS selftests
Date: Thu, 18 Dec 2025 12:27:43 +0100 [thread overview]
Message-ID: <aUPlL6PWbpe5RhG-@black.igk.intel.com> (raw)
In-Reply-To: <281d4ce1-bb8b-48bc-bac0-286b95ddf318@intel.com>
On Thu, Dec 18, 2025 at 11:16:29AM +0530, Anirban, Sk wrote:
> Hi Krzysztof,
>
> Could you please let me know if I can retain your review for this version of
> my patch?
Yes, unless there are major changes we usually retain the tags.
> On 18-12-2025 11:02 am, Sk Anirban wrote:
> > Report GPU throttle reasons when RPS tests fail to reach expected
> > frequencies or power levels.
> >
> > v2: Read the throttle value before the spinner ends (Raag)
> > Add a condition before printing throttle value (Krzysztof)
> > v3: Extend throttle reasons debug support (Raag)
> >
> > Signed-off-by: Sk Anirban <sk.anirban@intel.com>
> > ---
> > drivers/gpu/drm/i915/gt/selftest_rps.c | 37 ++++++++++++++++++++++----
> > 1 file changed, 32 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/gt/selftest_rps.c b/drivers/gpu/drm/i915/gt/selftest_rps.c
> > index 73bc91c6ea07..b42d9b39add6 100644
> > --- a/drivers/gpu/drm/i915/gt/selftest_rps.c
> > +++ b/drivers/gpu/drm/i915/gt/selftest_rps.c
> > @@ -378,6 +378,7 @@ int live_rps_control(void *arg)
> > enum intel_engine_id id;
> > struct igt_spinner spin;
> > intel_wakeref_t wakeref;
> > + u32 throttle;
> > int err = 0;
> > /*
> > @@ -463,6 +464,10 @@ int live_rps_control(void *arg)
> > max = rps_set_check(rps, limit);
> > max_dt = ktime_sub(ktime_get(), max_dt);
> > + throttle = intel_uncore_read(gt->uncore,
> > + intel_gt_perf_limit_reasons_reg(gt));
Now that we allow 100 characters I think this can be one line.
> > + throttle &= GT0_PERF_LIMIT_REASONS_MASK;
> > +
> > min_dt = ktime_get();
> > min = rps_set_check(rps, rps->min_freq);
> > min_dt = ktime_sub(ktime_get(), min_dt);
> > @@ -478,11 +483,9 @@ int live_rps_control(void *arg)
> > min, max, ktime_to_ns(min_dt), ktime_to_ns(max_dt));
> > if (limit != rps->max_freq) {
> > - u32 throttle = intel_uncore_read(gt->uncore,
> > - intel_gt_perf_limit_reasons_reg(gt));
> > -
> > - pr_warn("%s: GPU throttled with reasons 0x%08x\n",
> > - engine->name, throttle & GT0_PERF_LIMIT_REASONS_MASK);
> > + if (throttle)
> > + pr_warn("%s: GPU throttled with reasons 0x%08x\n",
> > + engine->name, throttle);
> > show_pstate_limits(rps);
> > }
> > @@ -1138,6 +1141,7 @@ int live_rps_power(void *arg)
> > struct intel_engine_cs *engine;
> > enum intel_engine_id id;
> > struct igt_spinner spin;
> > + u32 throttle;
> > int err = 0;
> > /*
> > @@ -1195,6 +1199,10 @@ int live_rps_power(void *arg)
> > max.freq = rps->max_freq;
> > max.power = measure_power_at(rps, &max.freq);
> > + throttle = intel_uncore_read(gt->uncore,
> > + intel_gt_perf_limit_reasons_reg(gt));
Ditto.
> > + throttle &= GT0_PERF_LIMIT_REASONS_MASK;
> > +
> > min.freq = rps->min_freq;
> > min.power = measure_power_at(rps, &min.freq);
> > @@ -1210,12 +1218,21 @@ int live_rps_power(void *arg)
> > pr_notice("Could not control frequency, ran at [%d:%uMHz, %d:%uMhz]\n",
> > min.freq, intel_gpu_freq(rps, min.freq),
> > max.freq, intel_gpu_freq(rps, max.freq));
> > +
> > + if (throttle)
> > + pr_warn("%s: GPU throttled with reasons 0x%08x\n",
> > + engine->name, throttle);
> > continue;
> > }
> > if (11 * min.power > 10 * max.power) {
> > pr_err("%s: did not conserve power when setting lower frequency!\n",
> > engine->name);
> > +
> > + if (throttle)
> > + pr_warn("%s: GPU throttled with reasons 0x%08x\n",
> > + engine->name, throttle);
> > +
> > err = -EINVAL;
> > break;
> > }
> > @@ -1241,6 +1258,7 @@ int live_rps_dynamic(void *arg)
> > struct intel_engine_cs *engine;
> > enum intel_engine_id id;
> > struct igt_spinner spin;
> > + u32 throttle;
> > int err = 0;
> > /*
> > @@ -1293,6 +1311,10 @@ int live_rps_dynamic(void *arg)
> > max.freq = wait_for_freq(rps, rps->max_freq, 500);
> > max.dt = ktime_sub(ktime_get(), max.dt);
> > + throttle = intel_uncore_read(gt->uncore,
> > + intel_gt_perf_limit_reasons_reg(gt));
Ditto. And with that,
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
> > + throttle &= GT0_PERF_LIMIT_REASONS_MASK;
> > +
> > igt_spinner_end(&spin);
> > min.dt = ktime_get();
> > @@ -1308,6 +1330,11 @@ int live_rps_dynamic(void *arg)
> > if (min.freq >= max.freq) {
> > pr_err("%s: dynamic reclocking of spinner failed\n!",
> > engine->name);
> > +
> > + if (throttle)
> > + pr_warn("%s: GPU throttled with reasons 0x%08x\n",
> > + engine->name, throttle);
> > +
> > err = -EINVAL;
> > }
next prev parent reply other threads:[~2025-12-18 11:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-18 5:32 [PATCH v3] drm/i915/selftest: Add throttle reason diagnostics to RPS selftests Sk Anirban
2025-12-18 5:46 ` Anirban, Sk
2025-12-18 11:27 ` Raag Jadav [this message]
2025-12-18 6:31 ` ✓ i915.CI.BAT: success for drm/i915/selftest: Add throttle reason diagnostics to RPS selftests (rev3) Patchwork
2025-12-18 8:25 ` ✗ i915.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aUPlL6PWbpe5RhG-@black.igk.intel.com \
--to=raag.jadav@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=krzysztof.karas@intel.com \
--cc=sk.anirban@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.