From: Tyler Hicks <code@tyhicks.com>
To: Thorsten Blum <thorsten.blum@linux.dev>
Cc: Eric Biggers <ebiggers@kernel.org>,
Ard Biesheuvel <ardb@kernel.org>,
Christian Brauner <brauner@kernel.org>,
Al Viro <viro@zeniv.linux.org.uk>,
ecryptfs@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/3] ecryptfs: Replace strcpy with strscpy in ecryptfs_cipher_code_to_string
Date: Tue, 23 Dec 2025 14:59:16 -0600 [thread overview]
Message-ID: <aUsCpC_80ZCoUdDM@yaupon> (raw)
In-Reply-To: <20251213110502.302950-4-thorsten.blum@linux.dev>
On 2025-12-13 12:04:52, Thorsten Blum wrote:
> strcpy() has been deprecated [1] because it performs no bounds checking
> on the destination buffer, which can lead to buffer overflows. Since
> the parameter 'char *str' is just a pointer with no size information,
> extend the function with a 'size' parameter to pass the destination
> buffer's size as an additional argument. Adjust the call sites
> accordingly.
>
> Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Tyler Hicks <code@tyhicks.com>
> ---
> fs/ecryptfs/crypto.c | 6 ++++--
> fs/ecryptfs/ecryptfs_kernel.h | 2 +-
> fs/ecryptfs/keystore.c | 9 +++++++--
> 3 files changed, 12 insertions(+), 5 deletions(-)
>
> diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
> index 2c37ee6a8be1..c99fc60a4e3b 100644
> --- a/fs/ecryptfs/crypto.c
> +++ b/fs/ecryptfs/crypto.c
> @@ -934,11 +934,12 @@ u8 ecryptfs_code_for_cipher_string(char *cipher_name, size_t key_bytes)
> /**
> * ecryptfs_cipher_code_to_string
> * @str: Destination to write out the cipher name
> + * @size: Destination buffer size
> * @cipher_code: The code to convert to cipher name string
> *
> * Returns zero on success
> */
> -int ecryptfs_cipher_code_to_string(char *str, u8 cipher_code)
> +int ecryptfs_cipher_code_to_string(char *str, size_t size, u8 cipher_code)
> {
> int rc = 0;
> int i;
> @@ -946,7 +947,8 @@ int ecryptfs_cipher_code_to_string(char *str, u8 cipher_code)
> str[0] = '\0';
> for (i = 0; i < ARRAY_SIZE(ecryptfs_cipher_code_str_map); i++)
> if (cipher_code == ecryptfs_cipher_code_str_map[i].cipher_code)
> - strcpy(str, ecryptfs_cipher_code_str_map[i].cipher_str);
> + strscpy(str, ecryptfs_cipher_code_str_map[i].cipher_str,
> + size);
> if (str[0] == '\0') {
> ecryptfs_printk(KERN_WARNING, "Cipher code not recognized: "
> "[%d]\n", cipher_code);
> diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
> index 9e6ab0b41337..0d824350f31a 100644
> --- a/fs/ecryptfs/ecryptfs_kernel.h
> +++ b/fs/ecryptfs/ecryptfs_kernel.h
> @@ -577,7 +577,7 @@ int ecryptfs_read_and_validate_header_region(struct inode *inode);
> int ecryptfs_read_and_validate_xattr_region(struct dentry *dentry,
> struct inode *inode);
> u8 ecryptfs_code_for_cipher_string(char *cipher_name, size_t key_bytes);
> -int ecryptfs_cipher_code_to_string(char *str, u8 cipher_code);
> +int ecryptfs_cipher_code_to_string(char *str, size_t size, u8 cipher_code);
> void ecryptfs_set_default_sizes(struct ecryptfs_crypt_stat *crypt_stat);
> int ecryptfs_generate_key_packet_set(char *dest_base,
> struct ecryptfs_crypt_stat *crypt_stat,
> diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
> index 7f9f68c00ef6..b5204ab3150d 100644
> --- a/fs/ecryptfs/keystore.c
> +++ b/fs/ecryptfs/keystore.c
> @@ -954,7 +954,9 @@ ecryptfs_parse_tag_70_packet(char **filename, size_t *filename_size,
> s->fnek_sig_hex[ECRYPTFS_SIG_SIZE_HEX] = '\0';
> (*packet_size) += ECRYPTFS_SIG_SIZE;
> s->cipher_code = data[(*packet_size)++];
> - rc = ecryptfs_cipher_code_to_string(s->cipher_string, s->cipher_code);
> + rc = ecryptfs_cipher_code_to_string(s->cipher_string,
> + sizeof(s->cipher_string),
> + s->cipher_code);
> if (rc) {
> printk(KERN_WARNING "%s: Cipher code [%d] is invalid\n",
> __func__, s->cipher_code);
> @@ -1172,7 +1174,9 @@ decrypt_pki_encrypted_session_key(struct ecryptfs_auth_tok *auth_tok,
> memcpy(crypt_stat->key, auth_tok->session_key.decrypted_key,
> auth_tok->session_key.decrypted_key_size);
> crypt_stat->key_size = auth_tok->session_key.decrypted_key_size;
> - rc = ecryptfs_cipher_code_to_string(crypt_stat->cipher, cipher_code);
> + rc = ecryptfs_cipher_code_to_string(crypt_stat->cipher,
> + sizeof(crypt_stat->cipher),
> + cipher_code);
> if (rc) {
> ecryptfs_printk(KERN_ERR, "Cipher code [%d] is invalid\n",
> cipher_code);
> @@ -1438,6 +1442,7 @@ parse_tag_3_packet(struct ecryptfs_crypt_stat *crypt_stat,
> goto out_free;
> }
> rc = ecryptfs_cipher_code_to_string(crypt_stat->cipher,
> + sizeof(crypt_stat->cipher),
> (u16)data[(*packet_size)]);
> if (rc)
> goto out_free;
> --
> Thorsten Blum <thorsten.blum@linux.dev>
> GPG: 1D60 735E 8AEF 3BE4 73B6 9D84 7336 78FD 8DFE EAD4
>
next prev parent reply other threads:[~2025-12-23 20:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-13 11:04 [PATCH 1/3] ecryptfs: Replace strcpy with strscpy in ecryptfs_set_default_crypt_stat_vals Thorsten Blum
2025-12-13 11:04 ` [PATCH 2/3] ecryptfs: Replace strcpy with strscpy in ecryptfs_cipher_code_to_string Thorsten Blum
2025-12-23 20:59 ` Tyler Hicks [this message]
2025-12-13 11:04 ` [PATCH 3/3] ecryptfs: Replace strcpy with strscpy in ecryptfs_validate_options Thorsten Blum
2025-12-23 21:00 ` Tyler Hicks
2025-12-23 20:57 ` [PATCH 1/3] ecryptfs: Replace strcpy with strscpy in ecryptfs_set_default_crypt_stat_vals Tyler Hicks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aUsCpC_80ZCoUdDM@yaupon \
--to=code@tyhicks.com \
--cc=ardb@kernel.org \
--cc=brauner@kernel.org \
--cc=ebiggers@kernel.org \
--cc=ecryptfs@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=thorsten.blum@linux.dev \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.