From: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
To: Pavel Machek <pavel@nabladev.com>
Cc: cip-dev@lists.cip-project.org,
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>,
Biju Das <biju.das.jz@bp.renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
tomm.merciai@gmail.com
Subject: Re: [cip-dev] [PATCH 6.1.y-cip 00/22] Add I3C support for RZ/G3E
Date: Fri, 9 Jan 2026 13:08:07 +0100 [thread overview]
Message-ID: <aWDvp3CFQIiO52v9@tom-desktop> (raw)
In-Reply-To: <aWDa/P7QVLdqjKrA@duo.ucw.cz>
Hi Pavel,
Thanks for your review!
On Fri, Jan 09, 2026 at 11:39:56AM +0100, Pavel Machek wrote:
> Hi!
>
> > This series adds I3C support for the Renesas RZ/G3E SoC into
> > linux-6.1.y-cip kernel. This includes also nxp,p3t1085 I3C backporting
> > for testing purposes.
>
> > Tested using the NXP P3T1085UK-ARD connected to the RZ/G3E SMARC SoM
> > via the RZ/G3E SMARC BREAKOUT board.
>
> Do we really need to add nxp,p3t1085 ? AFAICT people would need
> special hardware, and then would have to patch their dts anyway.
>
> I'd propose not to include these in -cip, as we could test them in the
> test farm, and it is just for testing anyway.
Just FYI for testing on RZ/G3E I used this series + [0] + configs
i3c related enable.
>
> I had some minor comments, but those should not block the merge.
>
> Reviewed-by: Pavel Machek <pavel@nabladev.com>
>
> I can apply the series after 6.12 version, if it passes testing and
> there are no other comments.
>
> Best regards,
> Pavel
> --
> In cooperation with Nabla.
Kind Regards,
Tommaso
[0] https://patchwork.kernel.org/project/linux-renesas-soc/patch/9d1cf2cdb1c11f24378404142e4c8aff680c6961.1763638659.git.tommaso.merciai.xr@bp.renesas.com/
next prev parent reply other threads:[~2026-01-09 12:08 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-08 9:28 [PATCH 6.1.y-cip 00/22] Add I3C support for RZ/G3E Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 01/22] bitops: add generic parity calculation for u8 Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 02/22] dt-bindings: i3c: Add Renesas I3C controller Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 03/22] i3c: controllers do not need to depend on I3C Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 04/22] i3c: master: Add basic driver for the Renesas I3C controller Tommaso Merciai
2026-01-09 10:22 ` [cip-dev] " Pavel Machek
2026-01-09 11:58 ` Tommaso Merciai
2026-01-14 11:43 ` Pavel Machek
2026-01-14 11:53 ` Pavel Machek
2026-01-08 9:28 ` [PATCH 6.1.y-cip 05/22] i3c: Document I3C_ADDR_SLOT_EXT_STATUS_MASK Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 06/22] i3c: Remove the const qualifier from i2c_msg pointer in i2c_xfers API Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 07/22] i3c: Standardize defines for specification parameters Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 08/22] i3c: Add more parameters for controllers to the header Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 09/22] i3c: master: Add helpers for DMA mapping and bounce buffer handling Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 10/22] i3c: document i3c_xfers Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 11/22] i3c: master: Add inline i3c_readl_fifo() and i3c_writel_fifo() Tommaso Merciai
2026-01-09 10:26 ` [cip-dev] " Pavel Machek
2026-01-08 9:28 ` [PATCH 6.1.y-cip 12/22] i3c: Correct the macro module_i3c_i2c_driver Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 13/22] i3c: export SETDASA method Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 14/22] clk: renesas: r9a09g047: Add I3C0 clocks and resets Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 15/22] arm64: dts: renesas: r9a09g047: Add I3C node Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 16/22] dt-bindings: hwmon: ti,tmp108: document V+ supply, add short description Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 17/22] dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 18/22] hwmon: (tmp108) Add NXP p3t1085 support Tommaso Merciai
2026-01-09 10:29 ` [cip-dev] " Pavel Machek
2026-01-08 9:28 ` [PATCH 6.1.y-cip 19/22] hwmon: (tmp108) Add helper function tmp108_common_probe() to prepare I3C support Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 20/22] hwmon: (tmp108) Add support for I3C device Tommaso Merciai
2026-01-09 10:32 ` [cip-dev] " Pavel Machek
2026-01-08 9:28 ` [PATCH 6.1.y-cip 21/22] hwmon: (tmp108) Do not fail in I3C probe when I3C regmap is a module Tommaso Merciai
2026-01-08 9:28 ` [PATCH 6.1.y-cip 22/22] hwmon: (tmp108) Add basic regulator support Tommaso Merciai
2026-01-09 10:39 ` [cip-dev] [PATCH 6.1.y-cip 00/22] Add I3C support for RZ/G3E Pavel Machek
2026-01-09 12:08 ` Tommaso Merciai [this message]
2026-01-13 5:43 ` nobuhiro.iwamatsu.x90
2026-01-15 8:50 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aWDvp3CFQIiO52v9@tom-desktop \
--to=tommaso.merciai.xr@bp.renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
--cc=nobuhiro1.iwamatsu@toshiba.co.jp \
--cc=pavel@nabladev.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=tomm.merciai@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.