All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Chen <peter.chen@cixtech.com>
To: Gary Yang <gary.yang@cixtech.com>
Cc: <fugang.duan@cixtech.com>, <robh@kernel.org>,
	<krzk+dt@kernel.org>, <conor+dt@kernel.org>,
	<cix-kernel-upstream@cixtech.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4 2/2] arm64: dts: cix: Add OrangePi 6 Plus board support
Date: Mon, 12 Jan 2026 09:15:52 +0800	[thread overview]
Message-ID: <aWRLSNke_flVURY6@nchen-desktop> (raw)
In-Reply-To: <20260110093406.2700505-3-gary.yang@cixtech.com>

On 26-01-10 17:34:06, Gary Yang wrote:
> OrangePi 6 Plus adopts CIX CD8180/CD8160 SoC, built-in 12-core 64-bit
> processor + NPU processor,integrated graphics processor, equipped with
> 16GB/32GB/64GB LPDDR5, and provides two M.2 KEY-M interfaces 2280 for NVMe
> SSD,as well as SPI FLASH and TF slots to meet the needs of fast read/write
> and high-capacity storage
> 
> Signed-off-by: Gary Yang <gary.yang@cixtech.com>

Applied, Thanks.

Peter
> ---
>  arch/arm64/boot/dts/cix/Makefile     |  1 +
>  arch/arm64/boot/dts/cix/sky1-xcp.dts | 83 ++++++++++++++++++++++++++++
>  2 files changed, 84 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/cix/sky1-xcp.dts
> 
> diff --git a/arch/arm64/boot/dts/cix/Makefile b/arch/arm64/boot/dts/cix/Makefile
> index ed3713982012..8a6c6fdc4ec0 100644
> --- a/arch/arm64/boot/dts/cix/Makefile
> +++ b/arch/arm64/boot/dts/cix/Makefile
> @@ -1,2 +1,3 @@
>  # SPDX-License-Identifier: GPL-2.0
>  dtb-$(CONFIG_ARCH_CIX) += sky1-orion-o6.dtb
> +dtb-$(CONFIG_ARCH_CIX) += sky1-xcp.dtb
> diff --git a/arch/arm64/boot/dts/cix/sky1-xcp.dts b/arch/arm64/boot/dts/cix/sky1-xcp.dts
> new file mode 100644
> index 000000000000..1fae52dc9bb0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/cix/sky1-xcp.dts
> @@ -0,0 +1,83 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright 2025 Cix Technology Group Co., Ltd.
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include "sky1.dtsi"
> +#include "sky1-pinfunc.h"
> +
> +/ {
> +	model = "Xunlong,OrangePi 6 Plus";
> +	compatible = "xunlong,orangepi-6-plus", "cix,sky1";
> +
> +	aliases {
> +		serial2 = &uart2;
> +	};
> +
> +	chosen {
> +		stdout-path = &uart2;
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		linux,cma {
> +			compatible = "shared-dma-pool";
> +			reusable;
> +			size = <0x0 0x28000000>;
> +			linux,cma-default;
> +		};
> +	};
> +
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hog>;
> +
> +	pinctrl_hog: hog-cfg {
> +		pins {
> +			pinmux = <CIX_PAD_GPIO144_FUNC_GPIO144>,
> +				<CIX_PAD_GPIO145_FUNC_GPIO145>,
> +				<CIX_PAD_GPIO146_FUNC_GPIO146>,
> +				<CIX_PAD_GPIO147_FUNC_GPIO147>;
> +			bias-pull-down;
> +			drive-strength = <8>;
> +		};
> +	};
> +};
> +
> +&iomuxc_s5 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hog_s5>;
> +
> +	pinctrl_hog_s5: hog-s5-cfg {
> +		pins {
> +			pinmux = <CIX_PAD_GPIO014_FUNC_GPIO014>;
> +			bias-pull-up;
> +			drive-strength = <8>;
> +
> +		};
> +	};
> +};
> +
> +&pcie_x8_rc {
> +	status = "okay";
> +};
> +
> +&pcie_x2_rc {
> +	status = "okay";
> +};
> +
> +&pcie_x1_1_rc {
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> -- 
> 2.49.0
> 

-- 

Best regards,
Peter


      reply	other threads:[~2026-01-12  1:16 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-10  9:34 [PATCH v4 0/2] Add OrangePi 6 Plus board Gary Yang
2026-01-10  9:34 ` [PATCH v4 1/2] dt-bindings: arm: cix: add " Gary Yang
2026-01-11 10:06   ` Krzysztof Kozlowski
2026-01-12  1:15   ` Peter Chen
2026-01-10  9:34 ` [PATCH v4 2/2] arm64: dts: cix: Add OrangePi 6 Plus board support Gary Yang
2026-01-12  1:15   ` Peter Chen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aWRLSNke_flVURY6@nchen-desktop \
    --to=peter.chen@cixtech.com \
    --cc=cix-kernel-upstream@cixtech.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fugang.duan@cixtech.com \
    --cc=gary.yang@cixtech.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.