All of lore.kernel.org
 help / color / mirror / Atom feed
From: Liviu Dudau <liviu.dudau@arm.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: "Linux PM" <linux-pm@vger.kernel.org>,
	imx@lists.linux.dev, LKML <linux-kernel@vger.kernel.org>,
	"Ulf Hansson" <ulf.hansson@linaro.org>,
	"Brian Norris" <briannorris@chromium.org>,
	"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
	"Maxime Ripard" <mripard@kernel.org>,
	"Thomas Zimmermann" <tzimmermann@suse.de>,
	"David Airlie" <airlied@gmail.com>,
	"Simona Vetter" <simona@ffwll.ch>,
	"Neil Armstrong" <neil.armstrong@linaro.org>,
	"Robert Foss" <rfoss@kernel.org>,
	"Laurent Pinchart" <Laurent.pinchart@ideasonboard.com>,
	"Jonas Karlman" <jonas@kwiboo.se>,
	"Jernej Skrabec" <jernej.skrabec@gmail.com>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"Dave Stevenson" <dave.stevenson@raspberrypi.com>,
	"Raspberry Pi Kernel Maintenance" <kernel-list@raspberrypi.com>,
	"Maíra Canal" <mcanal@igalia.com>,
	dri-devel@lists.freedesktop.org
Subject: Re: [RESEND][PATCH v1] drm: Discard pm_runtime_put() return value
Date: Thu, 15 Jan 2026 12:19:10 +0000	[thread overview]
Message-ID: <aWjbPpkDd_SORcfC@e142607> (raw)
In-Reply-To: <CAJZ5v0gdj6Oe=LSJX8+6JbxTt42W3RkabLDWh=VqEkjUvAWxow@mail.gmail.com>

On Wed, Jan 14, 2026 at 01:03:25PM +0100, Rafael J. Wysocki wrote:
> On Thu, Jan 8, 2026 at 4:38 PM Rafael J. Wysocki <rafael@kernel.org> wrote:
> >
> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >
> > Multiple DRM drivers use the pm_runtime_put() return value for printing
> > debug or even error messages and all of those messages are at least
> > somewhat misleading.
> >
> > Returning an error code from pm_runtime_put() merely means that it has
> > not queued up a work item to check whether or not the device can be
> > suspended and there are many perfectly valid situations in which that
> > can happen, like after writing "on" to the devices' runtime PM "control"
> > attribute in sysfs for one example.  It also happens when the kernel
> > has been configured with CONFIG_PM unset.
> >
> > For this reason, modify all of those drivers to simply discard the
> > pm_runtime_put() return value which is what they should be doing.
> >
> > This will facilitate a planned change of the pm_runtime_put() return
> > type to void in the future.
> >
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> > Acked-by: Liviu Dudau <liviu.dudau@arm.com>
> > ---
> >
> > This patch is requisite for converting pm_runtime_put() into a void
> > function.
> >
> > If you decide to pick it up, please let me know.
> >
> > Otherwise, an ACK or equivalent will be appreciated, but also the lack
> > of specific criticism will be eventually regarded as consent.
> >
> > Originally posted here:
> >
> > https://lore.kernel.org/linux-pm/3045480.e9J7NaK4W3@rafael.j.wysocki/
> 
> This is the last patch from the "discard pm_runtime_put() return
> values" lot that has not been applied yet, AFAICS, so this is the last
> call for objections or concerns related to it.

I think you can go ahead and apply it, I don't see how the imx8 driver will
be affected by the lack of debug messages.

Best regards,
Liviu

> 
> > ---
> >  drivers/gpu/drm/arm/malidp_crtc.c                   |    6 +-----
> >  drivers/gpu/drm/bridge/imx/imx8qm-ldb.c             |    4 +---
> >  drivers/gpu/drm/bridge/imx/imx8qxp-ldb.c            |    4 +---
> >  drivers/gpu/drm/bridge/imx/imx8qxp-pixel-combiner.c |    5 +----
> >  drivers/gpu/drm/bridge/imx/imx8qxp-pxl2dpi.c        |    5 +----
> >  drivers/gpu/drm/imx/dc/dc-crtc.c                    |   12 +++---------
> >  drivers/gpu/drm/vc4/vc4_hdmi.c                      |    5 +----
> >  drivers/gpu/drm/vc4/vc4_vec.c                       |   12 ++----------
> >  8 files changed, 11 insertions(+), 42 deletions(-)
> >
> > --- a/drivers/gpu/drm/arm/malidp_crtc.c
> > +++ b/drivers/gpu/drm/arm/malidp_crtc.c
> > @@ -77,7 +77,6 @@ static void malidp_crtc_atomic_disable(s
> >                                                                          crtc);
> >         struct malidp_drm *malidp = crtc_to_malidp_device(crtc);
> >         struct malidp_hw_device *hwdev = malidp->dev;
> > -       int err;
> >
> >         /* always disable planes on the CRTC that is being turned off */
> >         drm_atomic_helper_disable_planes_on_crtc(old_state, false);
> > @@ -87,10 +86,7 @@ static void malidp_crtc_atomic_disable(s
> >
> >         clk_disable_unprepare(hwdev->pxlclk);
> >
> > -       err = pm_runtime_put(crtc->dev->dev);
> > -       if (err < 0) {
> > -               DRM_DEBUG_DRIVER("Failed to disable runtime power management: %d\n", err);
> > -       }
> > +       pm_runtime_put(crtc->dev->dev);
> >  }
> >
> >  static const struct gamma_curve_segment {
> > --- a/drivers/gpu/drm/bridge/imx/imx8qm-ldb.c
> > +++ b/drivers/gpu/drm/bridge/imx/imx8qm-ldb.c
> > @@ -280,9 +280,7 @@ static void imx8qm_ldb_bridge_atomic_dis
> >         clk_disable_unprepare(imx8qm_ldb->clk_bypass);
> >         clk_disable_unprepare(imx8qm_ldb->clk_pixel);
> >
> > -       ret = pm_runtime_put(dev);
> > -       if (ret < 0)
> > -               DRM_DEV_ERROR(dev, "failed to put runtime PM: %d\n", ret);
> > +       pm_runtime_put(dev);
> >  }
> >
> >  static const u32 imx8qm_ldb_bus_output_fmts[] = {
> > --- a/drivers/gpu/drm/bridge/imx/imx8qxp-ldb.c
> > +++ b/drivers/gpu/drm/bridge/imx/imx8qxp-ldb.c
> > @@ -282,9 +282,7 @@ static void imx8qxp_ldb_bridge_atomic_di
> >         if (is_split && companion)
> >                 companion->funcs->atomic_disable(companion, state);
> >
> > -       ret = pm_runtime_put(dev);
> > -       if (ret < 0)
> > -               DRM_DEV_ERROR(dev, "failed to put runtime PM: %d\n", ret);
> > +       pm_runtime_put(dev);
> >  }
> >
> >  static const u32 imx8qxp_ldb_bus_output_fmts[] = {
> > --- a/drivers/gpu/drm/bridge/imx/imx8qxp-pixel-combiner.c
> > +++ b/drivers/gpu/drm/bridge/imx/imx8qxp-pixel-combiner.c
> > @@ -181,11 +181,8 @@ static void imx8qxp_pc_bridge_atomic_dis
> >  {
> >         struct imx8qxp_pc_channel *ch = bridge->driver_private;
> >         struct imx8qxp_pc *pc = ch->pc;
> > -       int ret;
> >
> > -       ret = pm_runtime_put(pc->dev);
> > -       if (ret < 0)
> > -               DRM_DEV_ERROR(pc->dev, "failed to put runtime PM: %d\n", ret);
> > +       pm_runtime_put(pc->dev);
> >  }
> >
> >  static const u32 imx8qxp_pc_bus_output_fmts[] = {
> > --- a/drivers/gpu/drm/bridge/imx/imx8qxp-pxl2dpi.c
> > +++ b/drivers/gpu/drm/bridge/imx/imx8qxp-pxl2dpi.c
> > @@ -127,11 +127,8 @@ static void imx8qxp_pxl2dpi_bridge_atomi
> >                                                   struct drm_atomic_state *state)
> >  {
> >         struct imx8qxp_pxl2dpi *p2d = bridge->driver_private;
> > -       int ret;
> >
> > -       ret = pm_runtime_put(p2d->dev);
> > -       if (ret < 0)
> > -               DRM_DEV_ERROR(p2d->dev, "failed to put runtime PM: %d\n", ret);
> > +       pm_runtime_put(p2d->dev);
> >
> >         if (p2d->companion)
> >                 p2d->companion->funcs->atomic_disable(p2d->companion, state);
> > --- a/drivers/gpu/drm/imx/dc/dc-crtc.c
> > +++ b/drivers/gpu/drm/imx/dc/dc-crtc.c
> > @@ -300,7 +300,7 @@ dc_crtc_atomic_disable(struct drm_crtc *
> >                                 drm_atomic_get_new_crtc_state(state, crtc);
> >         struct dc_drm_device *dc_drm = to_dc_drm_device(crtc->dev);
> >         struct dc_crtc *dc_crtc = to_dc_crtc(crtc);
> > -       int idx, ret;
> > +       int idx;
> >
> >         if (!drm_dev_enter(crtc->dev, &idx))
> >                 goto out;
> > @@ -313,16 +313,10 @@ dc_crtc_atomic_disable(struct drm_crtc *
> >         dc_fg_disable_clock(dc_crtc->fg);
> >
> >         /* request pixel engine power-off as plane is off too */
> > -       ret = pm_runtime_put(dc_drm->pe->dev);
> > -       if (ret)
> > -               dc_crtc_err(crtc, "failed to put DC pixel engine RPM: %d\n",
> > -                           ret);
> > +       pm_runtime_put(dc_drm->pe->dev);
> >
> >         /* request display engine power-off when CRTC is disabled */
> > -       ret = pm_runtime_put(dc_crtc->de->dev);
> > -       if (ret < 0)
> > -               dc_crtc_err(crtc, "failed to put DC display engine RPM: %d\n",
> > -                           ret);
> > +       pm_runtime_put(dc_crtc->de->dev);
> >
> >         drm_dev_exit(idx);
> >
> > --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> > +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> > @@ -848,7 +848,6 @@ static void vc4_hdmi_encoder_post_crtc_p
> >         struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
> >         struct drm_device *drm = vc4_hdmi->connector.dev;
> >         unsigned long flags;
> > -       int ret;
> >         int idx;
> >
> >         mutex_lock(&vc4_hdmi->mutex);
> > @@ -867,9 +866,7 @@ static void vc4_hdmi_encoder_post_crtc_p
> >         clk_disable_unprepare(vc4_hdmi->pixel_bvb_clock);
> >         clk_disable_unprepare(vc4_hdmi->pixel_clock);
> >
> > -       ret = pm_runtime_put(&vc4_hdmi->pdev->dev);
> > -       if (ret < 0)
> > -               drm_err(drm, "Failed to release power domain: %d\n", ret);
> > +       pm_runtime_put(&vc4_hdmi->pdev->dev);
> >
> >         drm_dev_exit(idx);
> >
> > --- a/drivers/gpu/drm/vc4/vc4_vec.c
> > +++ b/drivers/gpu/drm/vc4/vc4_vec.c
> > @@ -542,7 +542,7 @@ static void vc4_vec_encoder_disable(stru
> >  {
> >         struct drm_device *drm = encoder->dev;
> >         struct vc4_vec *vec = encoder_to_vc4_vec(encoder);
> > -       int idx, ret;
> > +       int idx;
> >
> >         if (!drm_dev_enter(drm, &idx))
> >                 return;
> > @@ -556,17 +556,9 @@ static void vc4_vec_encoder_disable(stru
> >
> >         clk_disable_unprepare(vec->clock);
> >
> > -       ret = pm_runtime_put(&vec->pdev->dev);
> > -       if (ret < 0) {
> > -               drm_err(drm, "Failed to release power domain: %d\n", ret);
> > -               goto err_dev_exit;
> > -       }
> > +       pm_runtime_put(&vec->pdev->dev);
> >
> >         drm_dev_exit(idx);
> > -       return;
> > -
> > -err_dev_exit:
> > -       drm_dev_exit(idx);
> >  }
> >
> >  static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
> >
> >
> >
> >

  reply	other threads:[~2026-01-15 12:20 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-08 15:17 [RESEND][PATCH v1] drm: Discard pm_runtime_put() return value Rafael J. Wysocki
2026-01-14 12:03 ` Rafael J. Wysocki
2026-01-15 12:19   ` Liviu Dudau [this message]
2026-01-15 13:39     ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aWjbPpkDd_SORcfC@e142607 \
    --to=liviu.dudau@arm.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=airlied@gmail.com \
    --cc=briannorris@chromium.org \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=kernel-list@raspberrypi.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mcanal@igalia.com \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=rafael@kernel.org \
    --cc=rfoss@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=tzimmermann@suse.de \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.