From: Sascha Hauer <s.hauer@pengutronix.de>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: Fabian Pfitzner <f.pfitzner@pengutronix.de>,
BAREBOX <barebox@lists.infradead.org>
Subject: Re: [PATCH 1/3] ARM: i.MX8MP: add imx8mp-frdm board
Date: Fri, 23 Jan 2026 10:16:58 +0100 [thread overview]
Message-ID: <aXM8iigmqbfe3h2k@pengutronix.de> (raw)
In-Reply-To: <20260119152437.nenxd336vgenmlib@pengutronix.de>
On Mon, Jan 19, 2026 at 04:24:37PM +0100, Marco Felsch wrote:
> Hi Fabian,
>
> please see below.
>
> On 26-01-19, Fabian Pfitzner wrote:
> > The FRDM-i.MX8MP is an NXP development platform based on the i.MX8M Plus
> > SoC, featuring a quad Cortex-A53, Cortex-M7 co-processor, 4GB LPDDR4,
> > 32GB eMMC, Wi-Fi 6/Bluetooth 5.4/802.15.4 tri-radio, Ethernet, HDMI/MIPI
> > display interfaces, camera connectors, and standard expansion headers.
> >
> > The DRAM timings were taken from [1].
> > Furthermore, the board code was mainly taken from the imx8mp-evk.
> >
> > [1] git@github.com:nxp-imx/uboot-imx.git branch lf_v2025.04
> >
> > Signed-off-by: Fabian Pfitzner <f.pfitzner@pengutronix.de>
> > ---
> > arch/arm/boards/Makefile | 1 +
> > arch/arm/boards/nxp-imx8mp-frdm/Makefile | 4 +
> > arch/arm/boards/nxp-imx8mp-frdm/board.c | 36 +
> > .../flash-header-imx8mp-frdm.imxcfg | 10 +
> > arch/arm/boards/nxp-imx8mp-frdm/lowlevel.c | 145 +++
> > arch/arm/boards/nxp-imx8mp-frdm/lpddr4-timing.c | 1119 ++++++++++++++++++++
> > arch/arm/configs/imx_v8_defconfig | 1 +
> > arch/arm/configs/multi_v8_defconfig | 1 +
> > arch/arm/mach-imx/Kconfig | 10 +
> > images/Makefile.imx | 2 +
> > 10 files changed, 1329 insertions(+)
> >
> > diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> > index f73285ede9d3ea0b7ea04f7a984fce0e796f9f73..71b26713f10ec4b617070015463c1e122ddc550a 100644
> > --- a/arch/arm/boards/Makefile
> > +++ b/arch/arm/boards/Makefile
> > @@ -73,6 +73,7 @@ obj-$(CONFIG_MACH_NXP_IMX8MQ_EVK) += nxp-imx8mq-evk/
> > obj-$(CONFIG_MACH_NXP_IMX8MM_EVK) += nxp-imx8mm-evk/
> > obj-$(CONFIG_MACH_NXP_IMX8MN_EVK) += nxp-imx8mn-evk/
> > obj-$(CONFIG_MACH_NXP_IMX8MP_EVK) += nxp-imx8mp-evk/
> > +obj-$(CONFIG_MACH_NXP_IMX8MP_FRDM) += nxp-imx8mp-frdm/
> > obj-$(CONFIG_MACH_NXP_IMX93_FRDM) += nxp-imx93-frdm/
> > obj-$(CONFIG_MACH_CONGATEC_QMX8P_SOM) += congatec-qmx8p/
> > obj-$(CONFIG_MACH_TQ_MBA8MPXL) += tqma8mpxl/
> > diff --git a/arch/arm/boards/nxp-imx8mp-frdm/Makefile b/arch/arm/boards/nxp-imx8mp-frdm/Makefile
> > new file mode 100644
> > index 0000000000000000000000000000000000000000..35d8640087b1d6d12201d2bcb5aacc76b03f140e
> > --- /dev/null
> > +++ b/arch/arm/boards/nxp-imx8mp-frdm/Makefile
> > @@ -0,0 +1,4 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +
> > +obj-y += board.o
> > +lwl-y += lowlevel.o lpddr4-timing.o
> > diff --git a/arch/arm/boards/nxp-imx8mp-frdm/board.c b/arch/arm/boards/nxp-imx8mp-frdm/board.c
> > new file mode 100644
> > index 0000000000000000000000000000000000000000..914d16e3b5c82d1e4b9dbe700af9061be079b2e2
> > --- /dev/null
> > +++ b/arch/arm/boards/nxp-imx8mp-frdm/board.c
> > @@ -0,0 +1,36 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2026 Fabian Pfitzner, Pengutronix
> > + */
> > +
> > +#include <asm/memory.h>
> > +#include <bootsource.h>
> > +#include <common.h>
> > +#include <deep-probe.h>
> > +#include <init.h>
> > +#include <linux/phy.h>
> > +#include <linux/sizes.h>
> > +#include <mach/imx/bbu.h>
> > +#include <mach/imx/iomux-mx8mp.h>
> > +#include <gpio.h>
> > +#include <envfs.h>
> > +
> > +static int nxp_imx8mp_frdm_probe(struct device *dev)
> > +{
> > + imx8m_bbu_internal_mmcboot_register_handler("eMMC", "/dev/mmc2", BBU_HANDLER_FLAG_DEFAULT);
>
> @Ahmad @Sascha
>
> Do we have a proper driver for the bbu? In that case we could drop the
> whole board.c :-)
No we don't have that yet. Would be nice to have, but requires some
thinking. I think this would require yet another barebox specific device
tree binding which is not a nice thing to have.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2026-01-23 9:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-19 15:02 [PATCH 0/3] add imx8mp-frdm board support Fabian Pfitzner
2026-01-19 15:02 ` [PATCH 1/3] ARM: i.MX8MP: add imx8mp-frdm board Fabian Pfitzner
2026-01-19 15:24 ` Marco Felsch
2026-01-23 9:16 ` Sascha Hauer [this message]
2026-01-23 9:27 ` Ahmad Fatoum
2026-01-23 10:11 ` Sascha Hauer
2026-01-19 15:02 ` [PATCH 2/3] dts: backport NXP i.MX8MP FRDM board dts Fabian Pfitzner
2026-01-19 15:26 ` Marco Felsch
2026-01-19 15:02 ` [PATCH 3/3] dts: imx8mp-frdm: import downstream changes Fabian Pfitzner
2026-01-19 15:38 ` Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aXM8iigmqbfe3h2k@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=f.pfitzner@pengutronix.de \
--cc=m.felsch@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.