All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Chris Wilson <chris@chris-wilson.co.uk>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 15/40] drm/i915: Priority boost for new clients
Date: Mon, 24 Sep 2018 11:29:52 +0100	[thread overview]
Message-ID: <aa7c660a-2fd2-d44c-68d5-d65f6124926c@linux.intel.com> (raw)
In-Reply-To: <20180919195544.1511-15-chris@chris-wilson.co.uk>


On 19/09/2018 20:55, Chris Wilson wrote:
> Taken from an idea used for FQ_CODEL, we give the first request of a
> new request flows a small priority boost. These flows are likely to
> correspond with short, interactive tasks and so be more latency sensitive
> than the longer free running queues. As soon as the client has more than
> one request in the queue, further requests are not boosted and it settles
> down into ordinary steady state behaviour.  Such small kicks dramatically
> help combat the starvation issue, by allowing each client the opportunity
> to run even when the system is under heavy throughput load (within the
> constraints of the user selected priority).
> 
> v2: Mark the preempted request as the start of a new flow, to prevent a
> single client being continually gazumped by its peers.
> 
> Testcase: igt/benchmarks/rrul
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
> ---
>   drivers/gpu/drm/i915/i915_request.c   | 16 ++++++++++++++--
>   drivers/gpu/drm/i915/i915_scheduler.h |  4 +++-
>   drivers/gpu/drm/i915/intel_lrc.c      | 25 +++++++++++++++++++------
>   3 files changed, 36 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_request.c b/drivers/gpu/drm/i915/i915_request.c
> index a492385b2089..56140ca054e8 100644
> --- a/drivers/gpu/drm/i915/i915_request.c
> +++ b/drivers/gpu/drm/i915/i915_request.c
> @@ -1127,8 +1127,20 @@ void i915_request_add(struct i915_request *request)
>   	 */
>   	local_bh_disable();
>   	rcu_read_lock(); /* RCU serialisation for set-wedged protection */
> -	if (engine->schedule)
> -		engine->schedule(request, &request->gem_context->sched);
> +	if (engine->schedule) {
> +		struct i915_sched_attr attr = request->gem_context->sched;
> +
> +		/*
> +		 * Boost priorities to new clients (new request flows).
> +		 *
> +		 * Allow interactive/synchronous clients to jump ahead of
> +		 * the bulk clients. (FQ_CODEL)
> +		 */
> +		if (!prev || i915_request_completed(prev))
> +			attr.priority |= I915_PRIORITY_NEWCLIENT;
> +
> +		engine->schedule(request, &attr);
> +	}
>   	rcu_read_unlock();
>   	i915_sw_fence_commit(&request->submit);
>   	local_bh_enable(); /* Kick the execlists tasklet if just scheduled */
> diff --git a/drivers/gpu/drm/i915/i915_scheduler.h b/drivers/gpu/drm/i915/i915_scheduler.h
> index 7edfad0abfd7..93e43e263d8c 100644
> --- a/drivers/gpu/drm/i915/i915_scheduler.h
> +++ b/drivers/gpu/drm/i915/i915_scheduler.h
> @@ -19,12 +19,14 @@ enum {
>   	I915_PRIORITY_INVALID = INT_MIN
>   };
>   
> -#define I915_USER_PRIORITY_SHIFT 0
> +#define I915_USER_PRIORITY_SHIFT 1
>   #define I915_USER_PRIORITY(x) ((x) << I915_USER_PRIORITY_SHIFT)
>   
>   #define I915_PRIORITY_COUNT BIT(I915_USER_PRIORITY_SHIFT)
>   #define I915_PRIORITY_MASK (-I915_PRIORITY_COUNT)
>   
> +#define I915_PRIORITY_NEWCLIENT	((u8)BIT(0))

Is the cast important and why?

> +
>   struct i915_sched_attr {
>   	/**
>   	 * @priority: execution and service priority
> diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
> index aeae82b5223c..ee9a656e549c 100644
> --- a/drivers/gpu/drm/i915/intel_lrc.c
> +++ b/drivers/gpu/drm/i915/intel_lrc.c
> @@ -363,9 +363,9 @@ static void unwind_wa_tail(struct i915_request *rq)
>   
>   static void __unwind_incomplete_requests(struct intel_engine_cs *engine)
>   {
> -	struct i915_request *rq, *rn;
> +	struct i915_request *rq, *rn, *active = NULL;
>   	struct list_head *uninitialized_var(pl);
> -	int last_prio = I915_PRIORITY_INVALID;
> +	int prio = I915_PRIORITY_INVALID | I915_PRIORITY_NEWCLIENT;
>   
>   	lockdep_assert_held(&engine->timeline.lock);
>   
> @@ -373,19 +373,32 @@ static void __unwind_incomplete_requests(struct intel_engine_cs *engine)
>   					 &engine->timeline.requests,
>   					 link) {
>   		if (i915_request_completed(rq))
> -			return;
> +			break;
>   
>   		__i915_request_unsubmit(rq);
>   		unwind_wa_tail(rq);
>   
>   		GEM_BUG_ON(rq_prio(rq) == I915_PRIORITY_INVALID);
> -		if (rq_prio(rq) != last_prio) {
> -			last_prio = rq_prio(rq);
> -			pl = lookup_priolist(engine, last_prio);
> +		if (rq_prio(rq) != prio) {
> +			prio = rq_prio(rq);
> +			pl = lookup_priolist(engine, prio);
>   		}
>   		GEM_BUG_ON(RB_EMPTY_ROOT(&engine->execlists.queue.rb_root));
>   
>   		list_add(&rq->sched.link, pl);
> +
> +		active = rq;
> +	}
> +
> +	/*
> +	 * The active request is now effectively the start of a new client
> +	 * stream, so give it the equivalent small priority bump to prevent
> +	 * it being gazumped a second time by another peer.
> +	 */
> +	if (!(prio & I915_PRIORITY_NEWCLIENT)) {
> +		prio |= I915_PRIORITY_NEWCLIENT;
> +		list_move_tail(&active->sched.link,
> +			       lookup_priolist(engine, prio));
>   	}
>   }
>   
> 

Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Regards,

Tvrtko
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2018-09-24 10:29 UTC|newest]

Thread overview: 106+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-19 19:55 [PATCH 01/40] drm: Use default dma_fence hooks where possible for null syncobj Chris Wilson
2018-09-19 19:55 ` [PATCH 02/40] drm: Fix syncobj handing of schedule() returning 0 Chris Wilson
2018-09-20 14:13   ` Tvrtko Ursulin
2018-09-19 19:55 ` [PATCH 03/40] drm/i915/selftests: Live tests emit requests and so require rpm Chris Wilson
2018-09-20 14:01   ` Tvrtko Ursulin
2018-09-20 14:47     ` Chris Wilson
2018-09-19 19:55 ` [PATCH 04/40] drm/i915: Park the GPU on module load Chris Wilson
2018-09-20 14:02   ` Tvrtko Ursulin
2018-09-20 14:52     ` Chris Wilson
2018-09-19 19:55 ` [PATCH 05/40] drm/i915: Handle incomplete Z_FINISH for compressed error states Chris Wilson
2018-09-19 19:55   ` Chris Wilson
2018-09-19 19:55 ` [PATCH 06/40] drm/i915: Clear the error PTE just once on finish Chris Wilson
2018-09-19 19:55 ` [PATCH 07/40] drm/i915: Cache the error string Chris Wilson
2018-09-19 19:55 ` [PATCH 08/40] drm/i915/execlists: Avoid kicking priority on the current context Chris Wilson
2018-09-19 19:55 ` [PATCH 09/40] drm/i915/selftests: Free the batch along the contexts error path Chris Wilson
2018-09-20  8:30   ` Mika Kuoppala
2018-09-20  8:36     ` Chris Wilson
2018-09-20  9:19       ` Mika Kuoppala
2018-09-19 19:55 ` [PATCH 10/40] drm/i915/selftests: Basic stress test for rapid context switching Chris Wilson
2018-09-20 10:38   ` Mika Kuoppala
2018-09-20 10:46     ` Chris Wilson
2018-09-19 19:55 ` [PATCH 11/40] drm/i915/execlists: Onion unwind for logical_ring_init() failure Chris Wilson
2018-09-20 14:18   ` Mika Kuoppala
2018-09-20 14:21   ` Tvrtko Ursulin
2018-09-20 19:59     ` Chris Wilson
2018-09-21 10:00       ` Tvrtko Ursulin
2018-09-21 10:01         ` Chris Wilson
2018-09-19 19:55 ` [PATCH 12/40] drm/i915/execlists: Assert the queue is non-empty on unsubmitting Chris Wilson
2018-09-24  9:07   ` Tvrtko Ursulin
2018-09-25  7:41     ` Chris Wilson
2018-09-25  8:51       ` Tvrtko Ursulin
2018-09-19 19:55 ` [PATCH 13/40] drm/i915: Reserve some priority bits for internal use Chris Wilson
2018-09-24  9:12   ` Tvrtko Ursulin
2018-09-19 19:55 ` [PATCH 14/40] drm/i915: Combine multiple internal plists into the same i915_priolist bucket Chris Wilson
2018-09-24 10:25   ` Tvrtko Ursulin
2018-09-25  7:55     ` Chris Wilson
2018-09-19 19:55 ` [PATCH 15/40] drm/i915: Priority boost for new clients Chris Wilson
2018-09-24 10:29   ` Tvrtko Ursulin [this message]
2018-09-25  8:01     ` Chris Wilson
2018-09-25  8:26       ` Chris Wilson
2018-09-25  8:57         ` Tvrtko Ursulin
2018-09-25  9:06           ` Chris Wilson
2018-09-25  9:08             ` Tvrtko Ursulin
2018-09-25 11:20         ` Michal Wajdeczko
2018-09-19 19:55 ` [PATCH 16/40] drm/i915: Pull scheduling under standalone lock Chris Wilson
2018-09-24 11:19   ` Tvrtko Ursulin
2018-09-25  8:19     ` Chris Wilson
2018-09-25  9:01       ` Tvrtko Ursulin
2018-09-25  9:10         ` Chris Wilson
2018-09-25  9:19           ` Tvrtko Ursulin
2018-09-19 19:55 ` [PATCH 17/40] drm/i915: Priority boost for waiting clients Chris Wilson
2018-09-24 11:29   ` Tvrtko Ursulin
2018-09-25  9:00     ` Chris Wilson
2018-09-25  9:07       ` Tvrtko Ursulin
2018-09-19 19:55 ` [PATCH 18/40] drm/i915: Report the number of closed vma held by each context in debugfs Chris Wilson
2018-09-24 11:57   ` Tvrtko Ursulin
2018-09-25 12:20     ` Chris Wilson
2018-09-19 19:55 ` [PATCH 19/40] drm/i915: Remove debugfs/i915_ppgtt_info Chris Wilson
2018-09-24 12:03   ` Tvrtko Ursulin
2018-09-19 19:55 ` [PATCH 20/40] drm/i915: Track all held rpm wakerefs Chris Wilson
2018-09-19 19:55 ` [PATCH 21/40] drm/i915: Markup paired operations on wakerefs Chris Wilson
2018-09-19 19:55 ` [PATCH 22/40] drm/i915: Syntatic sugar for using intel_runtime_pm Chris Wilson
2018-09-24 12:08   ` Tvrtko Ursulin
2018-09-19 19:55 ` [PATCH 23/40] drm/i915: Markup paired operations on display power domains Chris Wilson
2018-09-19 19:55 ` [PATCH 24/40] drm/i915: Track the wakeref used to initialise " Chris Wilson
2018-09-19 19:55 ` [PATCH 25/40] drm/i915/dp: Markup pps lock power well Chris Wilson
2018-09-19 19:55 ` [PATCH 26/40] drm/i915: Complain if hsw_get_pipe_config acquires the same power well twice Chris Wilson
2018-09-19 19:55 ` [PATCH 27/40] drm/i915: Mark up Ironlake ips with rpm wakerefs Chris Wilson
2018-09-19 19:55 ` [PATCH 28/40] drm/i915: Serialise concurrent calls to i915_gem_set_wedged() Chris Wilson
2018-09-19 19:55 ` [PATCH 29/40] drm/i915: Differentiate between ggtt->mutex and ppgtt->mutex Chris Wilson
2018-09-24 13:04   ` Tvrtko Ursulin
2018-09-19 19:55 ` [PATCH 30/40] drm/i915: Pull all the reset functionality together into i915_reset.c Chris Wilson
2018-09-19 19:55 ` [PATCH 31/40] drm/i915: Make all GPU resets atomic Chris Wilson
2018-09-19 19:55 ` [PATCH 32/40] drm/i915: Introduce the i915_user_extension_method Chris Wilson
2018-09-24 13:20   ` Tvrtko Ursulin
2018-09-19 19:55 ` [PATCH 33/40] drm/i915: Extend CREATE_CONTEXT to allow inheritance ala clone() Chris Wilson
2018-09-24 17:22   ` Tvrtko Ursulin
2018-09-19 19:55 ` [PATCH 34/40] drm/i915: Allow contexts to share a single timeline across all engines Chris Wilson
2018-09-25  8:45   ` Tvrtko Ursulin
2018-09-19 19:55 ` [PATCH 35/40] drm/i915: Fix I915_EXEC_RING_MASK Chris Wilson
2018-09-25  8:46   ` [Intel-gfx] " Tvrtko Ursulin
2018-09-19 19:55 ` [PATCH 36/40] drm/i915: Re-arrange execbuf so context is known before engine Chris Wilson
2018-09-19 19:55 ` [PATCH 37/40] drm/i915: Allow a context to define its set of engines Chris Wilson
2018-09-27 11:28   ` Tvrtko Ursulin
2018-09-28 20:22     ` Chris Wilson
2018-10-01  8:30       ` Tvrtko Ursulin
2018-09-19 19:55 ` [PATCH 38/40] drm/i915/execlists: Flush the CS events before unpinning Chris Wilson
2018-10-01 10:51   ` Tvrtko Ursulin
2018-10-01 11:06     ` Chris Wilson
2018-10-01 13:15       ` Tvrtko Ursulin
2018-10-01 13:26         ` Chris Wilson
2018-10-01 14:03           ` Tvrtko Ursulin
2018-09-19 19:55 ` [PATCH 39/40] drm/i915/execlists: Refactor out can_merge_rq() Chris Wilson
2018-09-27 11:32   ` Tvrtko Ursulin
2018-09-28 20:11     ` Chris Wilson
2018-10-01  8:14       ` Tvrtko Ursulin
2018-10-01  8:18         ` Chris Wilson
2018-10-01 10:18           ` Tvrtko Ursulin
2018-09-19 19:55 ` [PATCH 40/40] drm/i915: Load balancing across a virtual engine Chris Wilson
2018-10-01 11:37   ` Tvrtko Ursulin
2018-09-19 21:54 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [01/40] drm: Use default dma_fence hooks where possible for null syncobj Patchwork
2018-09-19 22:08 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-09-19 22:17 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-09-20 13:34 ` [PATCH 01/40] " Tvrtko Ursulin
2018-09-20 13:40   ` Chris Wilson
2018-09-20 13:54     ` Tvrtko Ursulin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aa7c660a-2fd2-d44c-68d5-d65f6124926c@linux.intel.com \
    --to=tvrtko.ursulin@linux.intel.com \
    --cc=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.