All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gabriele Monaco <gmonaco@redhat.com>
To: wen.yang@linux.dev
Cc: Nam Cao <namcao@linutronix.de>,
	linux-trace-kernel@vger.kernel.org,
	 linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 4/4] rv/reactors: add KUnit tests for reactor registration and dispatch
Date: Wed, 12 Aug 2026 14:58:20 +0200	[thread overview]
Message-ID: <abff002f4287ccbaf80d098ce1b369012394627c.camel@redhat.com> (raw)
In-Reply-To: <2b91af9f6d045f7fdb8620ef5c66c3b3e189833b.1786294920.git.wen.yang@linux.dev>

On Mon, 2026-08-10 at 01:10 +0800, wen.yang@linux.dev wrote:
> From: Wen Yang <wen.yang@linux.dev>
> 
> Add KUnit tests covering the reactor register/unregister lifecycle
> (including duplicate and name-length rejection) and rv_react() dispatch
> (a no-op without a callback, exactly one invocation with one; the mdelay
> callback keeps the CPU busy so a timer interrupt exercises the LD_WAIT_SPIN
> lockdep context).  The Kconfig entry is tristate so the tests can be built
> as a module when CONFIG_KUNIT=m; only RV_REACTORS is required.
> 

Looks simple and good now.

> Suggested-by: Gabriele Monaco <gmonaco@redhat.com>

Same as before, you can leave only

Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>

Thanks
Gabriele

> Signed-off-by: Wen Yang <wen.yang@linux.dev>
> ---
>  kernel/trace/rv/Kconfig             |  12 +++
>  kernel/trace/rv/Makefile            |   1 +
>  kernel/trace/rv/rv_reactors_kunit.c | 119 ++++++++++++++++++++++++++++
>  3 files changed, 132 insertions(+)
>  create mode 100644 kernel/trace/rv/rv_reactors_kunit.c
> 
> diff --git a/kernel/trace/rv/Kconfig b/kernel/trace/rv/Kconfig
> index efa930f94ea4..9bfd429ffdea 100644
> --- a/kernel/trace/rv/Kconfig
> +++ b/kernel/trace/rv/Kconfig
> @@ -113,6 +113,18 @@ config RV_REACT_PANIC
>  	  Enables the panic reactor. The panic reactor emits a printk()
>  	  message if an exception is found and panic()s the system.
>  
> +config RV_REACTORS_KUNIT
> +	tristate "KUnit tests for RV reactors" if !KUNIT_ALL_TESTS
> +	depends on KUNIT
> +	depends on RV_REACTORS
> +	default KUNIT_ALL_TESTS
> +	help
> +	  Enable KUnit tests for RV reactor registration and dispatch.
> +	  These tests verify the register/unregister lifecycle, duplicate
> +	  rejection, and that rv_react() correctly invokes callbacks.
> +
> +	  If unsure, say N.
> +
>  config RV_MONITORS_KUNIT_TEST
>  	tristate "KUnit tests for RV monitors" if !KUNIT_ALL_TESTS
>  	depends on KUNIT && RV && RV_REACTORS
> diff --git a/kernel/trace/rv/Makefile b/kernel/trace/rv/Makefile
> index cdbf68c84f5a..c895d81dfdad 100644
> --- a/kernel/trace/rv/Makefile
> +++ b/kernel/trace/rv/Makefile
> @@ -25,4 +25,5 @@ obj-$(CONFIG_RV_MON_WAKEUP) += monitors/wakeup/wakeup.o
>  obj-$(CONFIG_RV_REACTORS) += rv_reactors.o
>  obj-$(CONFIG_RV_REACT_PRINTK) += reactor_printk.o
>  obj-$(CONFIG_RV_REACT_PANIC) += reactor_panic.o
> +obj-$(CONFIG_RV_REACTORS_KUNIT) += rv_reactors_kunit.o
>  obj-$(CONFIG_RV_MONITORS_KUNIT_TEST) += rv_monitors_test.o
> diff --git a/kernel/trace/rv/rv_reactors_kunit.c
> b/kernel/trace/rv/rv_reactors_kunit.c
> new file mode 100644
> index 000000000000..d5b731eb11f3
> --- /dev/null
> +++ b/kernel/trace/rv/rv_reactors_kunit.c
> @@ -0,0 +1,119 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * KUnit tests for RV reactor registration and dispatch.
> + */
> +
> +#include <kunit/test.h>
> +#include <linux/rv.h>
> +#include <linux/delay.h>
> +#include <linux/atomic.h>
> +#include "rv.h"
> +
> +static struct rv_reactor test_reactor = {
> +	.name		= "kunit_test_reactor",
> +	.description	= "KUnit test reactor",
> +};
> +
> +static void reactor_teardown(void *arg)
> +{
> +	rv_unregister_reactor(&test_reactor);
> +}
> +
> +static void register_test_reactor(struct kunit *test)
> +{
> +	KUNIT_ASSERT_EQ(test, rv_register_reactor(&test_reactor), 0);
> +	KUNIT_ASSERT_EQ(test,
> +			kunit_add_action_or_reset(test, reactor_teardown,
> NULL), 0);
> +}
> +
> +static void test_double_register(struct kunit *test)
> +{
> +	register_test_reactor(test);
> +	KUNIT_EXPECT_EQ(test, rv_register_reactor(&test_reactor), -EINVAL);
> +}
> +
> +/*
> + * Use a fixed-size array so sizeof() gives the exact byte count at
> + * compile time.
> + */
> +static const char long_reactor_name[] = "kunit_reactor_name_too_long_xxx_";
> +_Static_assert(sizeof(long_reactor_name) - 1 >= MAX_RV_REACTOR_NAME_SIZE,
> +	       "long_reactor_name must be at least MAX_RV_REACTOR_NAME_SIZE
> chars");
> +
> +static void test_name_too_long(struct kunit *test)
> +{
> +	static struct rv_reactor long_reactor = {
> +		.name = long_reactor_name,
> +	};
> +
> +	KUNIT_EXPECT_EQ(test, rv_register_reactor(&long_reactor), -EINVAL);
> +}
> +
> +static struct kunit_case rv_reactor_registration_cases[] = {
> +	KUNIT_CASE(test_double_register),
> +	KUNIT_CASE(test_name_too_long),
> +	{}
> +};
> +
> +static struct kunit_suite rv_reactor_registration_suite = {
> +	.name		= "rv_reactor_registration",
> +	.test_cases	= rv_reactor_registration_cases,
> +};
> +
> +static atomic_t react_call_count;
> +
> +__printf(1, 0) static void mock_react(const char *msg, va_list args)
> +{
> +	atomic_inc(&react_call_count);
> +	/*
> +	 * Hold the CPU for 5 ms so a timer interrupt is likely to fire
> +	 * inside rv_react()'s lockdep context, exercising the LD_WAIT_SPIN
> +	 * constraint.  mdelay() is a calibrated busy-wait with no scheduler
> +	 * interaction.
> +	 */
> +	mdelay(5);
> +}
> +
> +static void test_react_no_callback(struct kunit *test)
> +{
> +	struct rv_monitor monitor = {
> +		.name = "kunit_null_react",
> +	};
> +
> +	atomic_set(&react_call_count, 0);
> +	rv_react(&monitor, "no callback");
> +
> +	/*
> +	 * The only possible failure in this test case is a kernel panic.
> +	 * NULL react guard: callback must NOT have been invoked
> +	 */
> +	KUNIT_EXPECT_EQ(test, atomic_read(&react_call_count), 0);
> +}
> +
> +static void test_react_callback_invoked(struct kunit *test)
> +{
> +	struct rv_monitor monitor = {
> +		.name	= "kunit_dispatch_monitor",
> +		.react	= mock_react,
> +	};
> +
> +	atomic_set(&react_call_count, 0);
> +	rv_react(&monitor, "callback invocation test");
> +	KUNIT_EXPECT_EQ(test, atomic_read(&react_call_count), 1);
> +}
> +
> +static struct kunit_case rv_react_dispatch_cases[] = {
> +	KUNIT_CASE(test_react_no_callback),
> +	KUNIT_CASE(test_react_callback_invoked),
> +	{}
> +};
> +
> +static struct kunit_suite rv_react_dispatch_suite = {
> +	.name		= "rv_react_dispatch",
> +	.test_cases	= rv_react_dispatch_cases,
> +};
> +
> +kunit_test_suites(&rv_reactor_registration_suite, &rv_react_dispatch_suite);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("KUnit tests for RV reactor registration and dispatch");


  reply	other threads:[~2026-08-12 12:58 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-09 17:10 [PATCH v3 0/4] rv/reactors: fix lockdep warning and add KUnit tests wen.yang
2026-08-09 17:10 ` [PATCH v3 1/4] rv/reactors: use context-sensitive lockdep wait type in rv_react() wen.yang
2026-08-12 12:34   ` Gabriele Monaco
2026-08-17  8:18     ` Nam Cao
2026-08-19  7:12       ` Gabriele Monaco
2026-08-19  9:24         ` Thomas Weißschuh
2026-08-19 17:28           ` Wen Yang
2026-08-09 17:10 ` [PATCH v3 2/4] rv/reactors: propagate rv_register_reactor() error from reactor init wen.yang
2026-08-17 10:54   ` Nam Cao
2026-08-09 17:10 ` [PATCH v3 3/4] rv/reactors: export rv_register_reactor() and rv_unregister_reactor() wen.yang
2026-08-09 17:10 ` [PATCH v3 4/4] rv/reactors: add KUnit tests for reactor registration and dispatch wen.yang
2026-08-12 12:58   ` Gabriele Monaco [this message]
2026-08-17 10:52   ` Nam Cao
2026-08-17 11:05     ` Gabriele Monaco

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=abff002f4287ccbaf80d098ce1b369012394627c.camel@redhat.com \
    --to=gmonaco@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-trace-kernel@vger.kernel.org \
    --cc=namcao@linutronix.de \
    --cc=wen.yang@linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.