From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: Marc Dietrich <marvin24@gmx.de>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Rob Herring <robh@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jonathan Hunter <jonathanh@nvidia.com>,
Bartosz Golaszewski <brgl@kernel.org>,
devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ARM: tegra: paz00: configure WiFi rfkill switch through device tree
Date: Wed, 25 Mar 2026 16:29:54 -0700 [thread overview]
Message-ID: <acRtWZohqfDLbMKE@google.com> (raw)
As of d64c732dfc9e ("net: rfkill: gpio: add DT support") rfkill-gpio
device can be instantiated via device tree.
Add the declaration there and drop board-paz00.c file and relevant
Makefile fragments.
Tested-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
V2:
- added Marc's Tested-by
V1:
- https://lore.kernel.org/r/aY_BpRQmLdqOOW2K@google.com
arch/arm/boot/dts/nvidia/tegra20-paz00.dts | 8 ++++
arch/arm/mach-tegra/Makefile | 2 -
arch/arm/mach-tegra/board-paz00.c | 56 ----------------------
arch/arm/mach-tegra/board.h | 2 -
arch/arm/mach-tegra/tegra.c | 4 --
5 files changed, 8 insertions(+), 64 deletions(-)
diff --git a/arch/arm/boot/dts/nvidia/tegra20-paz00.dts b/arch/arm/boot/dts/nvidia/tegra20-paz00.dts
index 1408e1e00759..d1093ad569e6 100644
--- a/arch/arm/boot/dts/nvidia/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-paz00.dts
@@ -706,6 +706,14 @@ vdd_pnl_reg: regulator-3v0 {
enable-active-high;
};
+ rfkill {
+ compatible = "rfkill-gpio";
+ label = "wifi_rfkill";
+ radio-type = "wlan";
+ reset-gpios = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio TEGRA_GPIO(K, 5) GPIO_ACTIVE_HIGH>;
+ };
+
sound {
compatible = "nvidia,tegra-audio-alc5632-paz00",
"nvidia,tegra-audio-alc5632";
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index a2bb55bc0081..9e3abb14fbc1 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -15,5 +15,3 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += pm-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_124_SOC) += pm-tegra30.o
-
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-paz00.o
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
deleted file mode 100644
index 3ec810b6f1a7..000000000000
--- a/arch/arm/mach-tegra/board-paz00.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-tegra/board-paz00.c
- *
- * Copyright (C) 2011 Marc Dietrich <marvin24@gmx.de>
- *
- * Based on board-harmony.c
- * Copyright (C) 2010 Google, Inc.
- */
-
-#include <linux/err.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio/property.h>
-#include <linux/platform_device.h>
-#include <linux/printk.h>
-#include <linux/property.h>
-
-#include "board.h"
-
-static const struct software_node tegra_gpiochip_node = {
- .name = "tegra-gpio",
-};
-
-static const struct property_entry wifi_rfkill_prop[] __initconst = {
- PROPERTY_ENTRY_STRING("name", "wifi_rfkill"),
- PROPERTY_ENTRY_STRING("type", "wlan"),
- PROPERTY_ENTRY_GPIO("reset-gpios",
- &tegra_gpiochip_node, 25, GPIO_ACTIVE_HIGH),
- PROPERTY_ENTRY_GPIO("shutdown-gpios",
- &tegra_gpiochip_node, 85, GPIO_ACTIVE_HIGH),
- { }
-};
-
-static const struct platform_device_info wifi_rfkill_info __initconst = {
- .name = "rfkill_gpio",
- .id = PLATFORM_DEVID_NONE,
- .properties = wifi_rfkill_prop,
-};
-
-void __init tegra_paz00_wifikill_init(void)
-{
- struct platform_device *pd;
- int err;
-
- err = software_node_register(&tegra_gpiochip_node);
- if (err) {
- pr_err("failed to register %s node: %d\n",
- tegra_gpiochip_node.name, err);
- return;
- }
-
- pd = platform_device_register_full(&wifi_rfkill_info);
- err = PTR_ERR_OR_ZERO(pd);
- if (err)
- pr_err("failed to register WiFi rfkill device: %d\n", err);
-}
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index 7b3ef0dc9be1..86c3ea0d6b30 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -19,6 +19,4 @@
void __init tegra_map_common_io(void);
void __init tegra_init_irq(void);
-void __init tegra_paz00_wifikill_init(void);
-
#endif
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index 9ef1dfa7b926..f324a7e491d8 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -83,10 +83,6 @@ static void __init tegra_dt_init(void)
static void __init tegra_dt_init_late(void)
{
- if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) &&
- of_machine_is_compatible("compal,paz00"))
- tegra_paz00_wifikill_init();
-
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) &&
of_machine_is_compatible("nvidia,tegra20"))
platform_device_register_simple("tegra20-cpufreq", -1, NULL, 0);
--
2.53.0.1018.g2bb0e51243-goog
--
Dmitry
next reply other threads:[~2026-03-25 23:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-25 23:29 Dmitry Torokhov [this message]
2026-03-26 10:16 ` [PATCH v2] ARM: tegra: paz00: configure WiFi rfkill switch through device tree Bartosz Golaszewski
2026-03-27 23:57 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=acRtWZohqfDLbMKE@google.com \
--to=dmitry.torokhov@gmail.com \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=marvin24@gmx.de \
--cc=robh@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.