From: Roland Dreier <rdreier@cisco.com>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org, Ingo Molnar <mingo@elte.hu>,
Thomas Mingarelli <thomas.mingarelli@hp.com>
Subject: Re: hpwdt oops in clflush_cache_range
Date: Wed, 27 Feb 2008 10:38:07 -0800 [thread overview]
Message-ID: <ada1w6y1bzk.fsf@cisco.com> (raw)
In-Reply-To: <alpine.LFD.1.00.0802271913050.7583@apollo.tec.linutronix.de> (Thomas Gleixner's message of "Wed, 27 Feb 2008 19:14:40 +0100 (CET)")
> Can you provide a full boot log please ?
Sure, below.
For this boot I blacklisted the hpwdt module and then loaded it by
hand at the very end, so the oops is the last thing.
[ 0.000000] Linux version 2.6.25-rc3 (rdreier@roland-xeon-1) (gcc version 4.2.3 (Debian 4.2.3-1)) #51 SMP Tue Feb 26 22:59:43 PST 2008
[ 0.000000] Command line: root=/dev/cciss/c0d0p6 ro console=ttyS0,57600
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe56000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe56000 - 00000000bfe5e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfe5e000 - 00000000bfe5f000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe5f000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001bffff000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 786006) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 786014, 786015) 2 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1835007) 3 entries of 3200 used
[ 0.000000] end_pfn_map = 1835007
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000F4F00, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT BFE567C0, 0074 (r1 HP ProLiant 2 Ò\x04 162E)
[ 0.000000] ACPI: FACP BFE56840, 00F4 (r3 HP ProLiant 2 Ò\x04 162E)
[ 0.000000] ACPI: DSDT BFE56940, 22E7 (r1 HP DSDT 1 INTL 20030228)
[ 0.000000] ACPI: FACS BFE56100, 0040
[ 0.000000] ACPI: SPCR BFE56140, 0050 (r1 HP SPCRRBSU 1 Ò\x04 162E)
[ 0.000000] ACPI: MCFG BFE561C0, 003C (r1 HP ProLiant 1 0)
[ 0.000000] ACPI: HPET BFE56200, 0038 (r1 HP ProLiant 2 Ò\x04 162E)
[ 0.000000] ACPI: SPMI BFE56240, 0040 (r5 HP ProLiant 1 Ò\x04 162E)
[ 0.000000] ACPI: ERST BFE56280, 01D0 (r1 HP ProLiant 1 Ò\x04 162E)
[ 0.000000] ACPI: APIC BFE56480, 009E (r1 HP ProLiant 2 0)
[ 0.000000] ACPI: FFFF BFE56540, 0176 (r1 HP ProLiant 1 Ò\x04 162E)
[ 0.000000] ACPI: BERT BFE566C0, 0030 (r1 HP ProLiant 1 Ò\x04 162E)
[ 0.000000] ACPI: HEST BFE56700, 00BC (r1 HP ProLiant 1 Ò\x04 162E)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001bffff000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 786006) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 786014, 786015) 2 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1835007) 3 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001bffff000
[ 0.000000] NODE_DATA [0000000000010000 - 0000000000016fff]
[ 0.000000] bootmap [0000000000017000 - 000000000004efff] pages 38
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[ 0.000000] early res: 2 [200000-9dce87] TEXT DATA BSS
[ 0.000000] early res: 3 [9f400-a03ff] EBDA
[ 0.000000] early res: 4 [8000-ffff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001400000 on node 0
[ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001800000 on node 0
[ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001c00000 on node 0
[ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810001e00000 on node 0
[ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002200000 on node 0
[ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002600000 on node 0
[ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002a00000 on node 0
[ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810002c00000 on node 0
[ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003000000 on node 0
[ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003400000 on node 0
[ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003800000 on node 0
[ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810003a00000 on node 0
[ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810003e00000 on node 0
[ 0.000000] [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004200000 on node 0
[ 0.000000] [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004400000 on node 0
[ 0.000000] [ffffe20002000000-ffffe200021fffff] PMD ->ffff810004800000 on node 0
[ 0.000000] [ffffe20002200000-ffffe200023fffff] PMD ->ffff810004c00000 on node 0
[ 0.000000] [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005000000 on node 0
[ 0.000000] [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005200000 on node 0
[ 0.000000] [ffffe20002800000-ffffe200029fffff] PMD ->ffff810005600000 on node 0
[ 0.000000] [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810005a00000 on node 0
[ 0.000000] [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810005e00000 on node 0
[ 0.000000] [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006000000 on node 0
[ 0.000000] [ffffe20003000000-ffffe200031fffff] PMD ->ffff810006400000 on node 0
[ 0.000000] [ffffe20003200000-ffffe200033fffff] PMD ->ffff810006800000 on node 0
[ 0.000000] [ffffe20003400000-ffffe200035fffff] PMD ->ffff810006a00000 on node 0
[ 0.000000] [ffffe20003600000-ffffe200037fffff] PMD ->ffff810006e00000 on node 0
[ 0.000000] [ffffe20003800000-ffffe200039fffff] PMD ->ffff810007200000 on node 0
[ 0.000000] [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007600000 on node 0
[ 0.000000] [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007800000 on node 0
[ 0.000000] [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007c00000 on node 0
[ 0.000000] [ffffe20004000000-ffffe200041fffff] PMD ->ffff810008000000 on node 0
[ 0.000000] [ffffe20005800000-ffffe200059fffff] PMD ->ffff810008400000 on node 0
[ 0.000000] [ffffe20005a00000-ffffe20005bfffff] PMD ->ffff810008600000 on node 0
[ 0.000000] [ffffe20005c00000-ffffe20005dfffff] PMD ->ffff810008a00000 on node 0
[ 0.000000] [ffffe20005e00000-ffffe20005ffffff] PMD ->ffff810008e00000 on node 0
[ 0.000000] [ffffe20006000000-ffffe200061fffff] PMD ->ffff810009000000 on node 0
[ 0.000000] [ffffe20006200000-ffffe200063fffff] PMD ->ffff810009400000 on node 0
[ 0.000000] [ffffe20006400000-ffffe200065fffff] PMD ->ffff810009800000 on node 0
[ 0.000000] [ffffe20006600000-ffffe200067fffff] PMD ->ffff810009c00000 on node 0
[ 0.000000] [ffffe20006800000-ffffe200069fffff] PMD ->ffff810009e00000 on node 0
[ 0.000000] [ffffe20006a00000-ffffe20006bfffff] PMD ->ffff81000a200000 on node 0
[ 0.000000] [ffffe20006c00000-ffffe20006dfffff] PMD ->ffff81000a600000 on node 0
[ 0.000000] [ffffe20006e00000-ffffe20006ffffff] PMD ->ffff81000aa00000 on node 0
[ 0.000000] [ffffe20007000000-ffffe200071fffff] PMD ->ffff81000ac00000 on node 0
[ 0.000000] [ffffe20007200000-ffffe200073fffff] PMD ->ffff81000b000000 on node 0
[ 0.000000] [ffffe20007400000-ffffe200075fffff] PMD ->ffff81000b400000 on node 0
[ 0.000000] [ffffe20007600000-ffffe200077fffff] PMD ->ffff81000b600000 on node 0
[ 0.000000] [ffffe20007800000-ffffe200079fffff] PMD ->ffff81000ba00000 on node 0
[ 0.000000] [ffffe20007a00000-ffffe20007bfffff] PMD ->ffff81000be00000 on node 0
[ 0.000000] [ffffe20007c00000-ffffe20007dfffff] PMD ->ffff81000c200000 on node 0
[ 0.000000] [ffffe20007e00000-ffffe20007ffffff] PMD ->ffff81000c400000 on node 0
[ 0.000000] [ffffe20008000000-ffffe200081fffff] PMD ->ffff81000c800000 on node 0
[ 0.000000] [ffffe20008200000-ffffe200083fffff] PMD ->ffff81000cc00000 on node 0
[ 0.000000] [ffffe20008400000-ffffe200085fffff] PMD ->ffff81000d000000 on node 0
[ 0.000000] [ffffe20008600000-ffffe200087fffff] PMD ->ffff81000d200000 on node 0
[ 0.000000] [ffffe20008800000-ffffe200089fffff] PMD ->ffff81000d600000 on node 0
[ 0.000000] [ffffe20008a00000-ffffe20008bfffff] PMD ->ffff81000da00000 on node 0
[ 0.000000] [ffffe20008c00000-ffffe20008dfffff] PMD ->ffff81000dc00000 on node 0
[ 0.000000] [ffffe20008e00000-ffffe20008ffffff] PMD ->ffff81000e000000 on node 0
[ 0.000000] [ffffe20009000000-ffffe200091fffff] PMD ->ffff81000e400000 on node 0
[ 0.000000] [ffffe20009200000-ffffe200093fffff] PMD ->ffff81000e800000 on node 0
[ 0.000000] [ffffe20009400000-ffffe200095fffff] PMD ->ffff81000ea00000 on node 0
[ 0.000000] [ffffe20009600000-ffffe200097fffff] PMD ->ffff81000ee00000 on node 0
[ 0.000000] [ffffe20009800000-ffffe200099fffff] PMD ->ffff81000f200000 on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1835007
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 786006
[ 0.000000] 0: 786014 -> 786015
[ 0.000000] 0: 1048576 -> 1835007
[ 0.000000] On node 0 totalpages: 1572341
[ 0.000000] DMA zone: 88 pages used for memmap
[ 0.000000] DMA zone: 2026 pages reserved
[ 0.000000] DMA zone: 1885 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 22440 pages used for memmap
[ 0.000000] DMA32 zone: 759471 pages, LIFO batch:31
[ 0.000000] Normal zone: 16895 pages used for memmap
[ 0.000000] Normal zone: 769536 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] Processor #6
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] Processor #7
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
[ 0.000000] PERCPU: Allocating 34848 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1530892
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/cciss/c0d0p6 ro console=ttyS0,57600
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000002] time.c: Detected 3000.010 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [ttyS0] enabled
[ 0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.004000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.004000] ... MAX_LOCK_DEPTH: 48
[ 0.004000] ... MAX_LOCKDEP_KEYS: 2048
[ 0.004000] ... CLASSHASH_SIZE: 1024
[ 0.004000] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.004000] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.004000] ... CHAINHASH_SIZE: 8192
[ 0.004000] memory used by lock dependency info: 1648 kB
[ 0.004000] per task-struct memory footprint: 2688 bytes
[ 0.004000] Checking aperture...
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0xf483000 - 0x13483000
[ 0.004000] Memory: 6079208k/7340028k available (2193k kernel code, 210156k reserved, 1289k data, 320k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.080007] Calibrating delay using timer specific routine.. 6005.34 BogoMIPS (lpj=12010692)
[ 0.088699] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.096199] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.104343] Mount-cache hash table entries: 256
[ 0.108414] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.116009] CPU: L2 cache: 4096K
[ 0.120011] CPU 0/0 -> Node 0
[ 0.124010] CPU: Physical Processor ID: 0
[ 0.128010] CPU: Processor Core ID: 0
[ 0.132014] CPU0: Thermal monitoring enabled (TM2)
[ 0.136011] using mwait in idle threads.
[ 0.140018] Freeing SMP alternatives: 22k freed
[ 0.144027] ACPI: Core revision 20070126
[ 0.194208] Using local APIC timer interrupts.
[ 0.200014] APIC timer calibration result 20833408
[ 0.200015] Detected 20.833 MHz APIC timer.
[ 0.204233] lockdep: fixing up alternatives.
[ 0.208069] Booting processor 1/4 APIC 0x6
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 6000.15 BogoMIPS (lpj=12000301)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 1/6 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 3
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06
[ 0.300664] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.304123] lockdep: fixing up alternatives.
[ 0.308036] Booting processor 2/4 APIC 0x1
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 6000.11 BogoMIPS (lpj=12000237)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 2/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU2: Thermal monitoring enabled (TM2)
[ 0.004000] Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06
[ 0.404455] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.408167] lockdep: fixing up alternatives.
[ 0.412061] Booting processor 3/4 APIC 0x7
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 6000.18 BogoMIPS (lpj=12000364)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 3/7 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 3
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU3: Thermal monitoring enabled (TM2)
[ 0.004000] Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06
[ 0.504688] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.508059] Brought up 4 CPUs
[ 0.512136] CPU0 attaching sched-domain:
[ 0.512138] domain 0: span 05
[ 0.512139] groups: 01 04
[ 0.512141] domain 1: span 0f
[ 0.512142] groups: 05 0a
[ 0.512144] domain 2: span 0f
[ 0.512145] groups: 0f
[ 0.512148] CPU1 attaching sched-domain:
[ 0.512149] domain 0: span 0a
[ 0.512150] groups: 02 08
[ 0.512152] domain 1: span 0f
[ 0.512153] groups: 0a 05
[ 0.512154] domain 2: span 0f
[ 0.512156] groups: 0f
[ 0.512158] CPU2 attaching sched-domain:
[ 0.512159] domain 0: span 05
[ 0.512160] groups: 04 01
[ 0.512162] domain 1: span 0f
[ 0.512163] groups: 05 0a
[ 0.512165] domain 2: span 0f
[ 0.512166] groups: 0f
[ 0.512168] CPU3 attaching sched-domain:
[ 0.512169] domain 0: span 0a
[ 0.512170] groups: 08 02
[ 0.512172] domain 1: span 0f
[ 0.512173] groups: 0a 05
[ 0.512175] domain 2: span 0f
[ 0.512176] groups: 0f
[ 0.227144] net_namespace: 520 bytes
[ 0.228344] NET: Registered protocol family 16
[ 0.232459] ACPI: bus type pci registered
[ 0.236211] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[ 0.240026] PCI: Not using MMCONFIG.
[ 0.244026] PCI: Using configuration type 1
[ 0.250399] ACPI: EC: Look up EC in DSDT
[ 0.251877] ACPI: Interpreter enabled
[ 0.252027] ACPI: (supports S0 S5)
[ 0.257087] ACPI: Using IOAPIC for interrupt routing
[ 0.268969] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.303594] PCI: Transparent bridge - 0000:00:1e.0
[ 0.304086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.304348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
[ 0.304488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTA._PRT]
[ 0.304580] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTB._PRT]
[ 0.304672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]
[ 0.304740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT]
[ 0.304877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT]
[ 0.305053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE2._PRT]
[ 0.305229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE3._PRT]
[ 0.305384] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]
[ 0.305562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]
[ 0.305739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06._PRT]
[ 0.313999] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
[ 0.321200] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
[ 0.329196] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
[ 0.336669] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[ 0.344144] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
[ 0.352486] ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
[ 0.361728] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
[ 0.369200] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
[ 0.377044] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.380104] pnp: PnP ACPI init
[ 0.384048] ACPI: bus type pnp registered
[ 0.388231] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.388441] 00:01: calling quirk 0xffffffff803708e6: quirk_supermicro_h8dce_system+0x0/0xe1()
[ 0.388553] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.388665] pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active)
[ 0.388816] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.388920] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.389022] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.779506] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.779644] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.779756] pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active)
[ 0.780222] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.780617] pnp: PnP ACPI: found 10 devices
[ 0.784068] ACPI: ACPI bus type pnp unregistered
[ 0.788377] usbcore: registered new interface driver usbfs
[ 0.792196] usbcore: registered new interface driver hub
[ 0.800131] usbcore: registered new device driver usb
[ 0.804366] PCI: Using ACPI for IRQ routing
[ 0.808069] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.836111] PCI-GART: No AMD northbridge found.
[ 0.840074] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11
[ 0.846221] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.851882] Time: tsc clocksource has been installed.
[ 0.848066] Switched to high resolution mode on CPU 1
[ 0.404041] Switched to high resolution mode on CPU 3
[ 0.856079] Switched to high resolution mode on CPU 0
[ 0.528058] Switched to high resolution mode on CPU 2
[ 0.868081] pnp: the driver 'system' has been registered
[ 0.868094] system 00:01: ioport range 0x408-0x40f has been reserved
[ 0.872074] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.876074] system 00:01: ioport range 0x700-0x71f has been reserved
[ 0.880074] system 00:01: ioport range 0x800-0x83f has been reserved
[ 0.884074] system 00:01: ioport range 0x900-0x97f has been reserved
[ 0.888074] system 00:01: ioport range 0xc80-0xc83 has been reserved
[ 0.892075] system 00:01: ioport range 0xcd4-0xcd7 has been reserved
[ 0.896075] system 00:01: ioport range 0xf50-0xf58 has been reserved
[ 0.900075] system 00:01: ioport range 0xca0-0xca1 has been reserved
[ 0.904075] system 00:01: ioport range 0xca4-0xca5 has been reserved
[ 0.908076] system 00:01: ioport range 0x2f8-0x2ff has been reserved
[ 0.912076] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.916076] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 0.920077] system 00:01: driver attached
[ 0.921724] PCI: Bridge: 0000:0a:00.0
[ 0.924076] IO window: disabled.
[ 0.928169] MEM window: disabled.
[ 0.932123] PREFETCH window: disabled.
[ 0.936215] PCI: Bridge: 0000:0f:04.0
[ 0.940077] IO window: disabled.
[ 0.944170] MEM window: disabled.
[ 0.948124] PREFETCH window: disabled.
[ 0.952216] PCI: Bridge: 0000:0e:00.0
[ 0.956080] IO window: 4000-4fff
[ 0.960170] MEM window: 0xfde00000-0xfdefffff
[ 0.964125] PREFETCH window: disabled.
[ 0.968216] PCI: Bridge: 0000:0a:01.0
[ 0.972079] IO window: 4000-4fff
[ 0.976171] MEM window: 0xfde00000-0xfdefffff
[ 0.980125] PREFETCH window: disabled.
[ 0.984218] PCI: Bridge: 0000:0a:02.0
[ 0.988079] IO window: disabled.
[ 0.992172] MEM window: disabled.
[ 0.996126] PREFETCH window: disabled.
[ 1.000218] PCI: Bridge: 0000:09:00.0
[ 1.004081] IO window: 4000-4fff
[ 1.008173] MEM window: 0xfde00000-0xfdefffff
[ 1.012127] PREFETCH window: disabled.
[ 1.016219] PCI: Bridge: 0000:09:00.3
[ 1.020081] IO window: disabled.
[ 1.024174] MEM window: disabled.
[ 1.028128] PREFETCH window: disabled.
[ 1.032220] PCI: Bridge: 0000:00:02.0
[ 1.036083] IO window: 4000-4fff
[ 1.040085] MEM window: 0xfdd00000-0xfdefffff
[ 1.044084] PREFETCH window: disabled.
[ 1.048086] PCI: Bridge: 0000:00:03.0
[ 1.052083] IO window: disabled.
[ 1.056087] MEM window: disabled.
[ 1.060085] PREFETCH window: disabled.
[ 1.064087] PCI: Bridge: 0000:00:04.0
[ 1.068084] IO window: disabled.
[ 1.072087] MEM window: 0xfdf00000-0xfdffffff
[ 1.076087] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 1.080088] PCI: Bridge: 0000:00:05.0
[ 1.084085] IO window: disabled.
[ 1.088088] MEM window: disabled.
[ 1.092087] PREFETCH window: disabled.
[ 1.096089] PCI: Bridge: 0000:00:06.0
[ 1.100086] IO window: disabled.
[ 1.104089] MEM window: disabled.
[ 1.108088] PREFETCH window: disabled.
[ 1.112090] PCI: Bridge: 0000:00:07.0
[ 1.116087] IO window: disabled.
[ 1.120090] MEM window: disabled.
[ 1.124089] PREFETCH window: disabled.
[ 1.128091] PCI: Bridge: 0000:02:00.0
[ 1.132088] IO window: disabled.
[ 1.136093] MEM window: 0xf8000000-0xf9ffffff
[ 1.140092] PREFETCH window: disabled.
[ 1.144095] PCI: Bridge: 0000:00:1c.0
[ 1.148089] IO window: disabled.
[ 1.152093] MEM window: 0xf8000000-0xf9ffffff
[ 1.156092] PREFETCH window: disabled.
[ 1.160094] PCI: Bridge: 0000:04:00.0
[ 1.164090] IO window: disabled.
[ 1.168095] MEM window: 0xfa000000-0xfbffffff
[ 1.172094] PREFETCH window: disabled.
[ 1.176097] PCI: Bridge: 0000:00:1c.1
[ 1.180091] IO window: disabled.
[ 1.184095] MEM window: 0xfa000000-0xfbffffff
[ 1.188095] PREFETCH window: disabled.
[ 1.192097] PCI: Bridge: 0000:00:1e.0
[ 1.196093] IO window: 2000-3fff
[ 1.200096] MEM window: 0xf7e00000-0xf7ffffff
[ 1.204095] PREFETCH window: 0x00000000c8000000-0x00000000cfffffff
[ 1.208108] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 1.208569] PCI: Setting latency timer of device 0000:09:00.0 to 64
[ 1.209121] ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.216141] PCI: Setting latency timer of device 0000:0a:00.0 to 64
[ 1.216691] ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 1.224141] PCI: Setting latency timer of device 0000:0a:01.0 to 64
[ 1.228184] PCI: Setting latency timer of device 0000:0e:00.0 to 64
[ 1.229055] ACPI: PCI Interrupt 0000:0a:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 1.236142] PCI: Setting latency timer of device 0000:0a:02.0 to 64
[ 1.240368] PCI: Setting latency timer of device 0000:09:00.3 to 64
[ 1.240421] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 1.240430] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 1.240439] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 1.240448] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 1.240456] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 1.240472] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.248098] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.248120] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 1.248137] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 1.256098] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.256120] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 1.256131] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 1.256141] NET: Registered protocol family 2
[ 1.304433] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.312526] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.323370] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 1.328265] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.332129] TCP reno registered
[ 1.348600] sysctl table check failed: /kernel/vsyscall64 No proc_handler
[ 1.360103] Pid: 1, comm: swapper Not tainted 2.6.25-rc3 #51
[ 1.364104]
[ 1.364104] Call Trace:
[ 1.368108] [<ffffffff802442eb>] set_fail+0x3f/0x47
[ 1.372105] [<ffffffff802447a5>] sysctl_check_table+0x4b2/0x501
[ 1.376105] [<ffffffff802447bf>] sysctl_check_table+0x4cc/0x501
[ 1.380106] [<ffffffff80234d3f>] __register_sysctl_paths+0xea/0x142
[ 1.384107] [<ffffffff805a1aca>] vsyscall_init+0x49/0x62
[ 1.388106] [<ffffffff8059b6cd>] kernel_init+0x159/0x2c8
[ 1.392108] [<ffffffff8041e1fa>] trace_hardirqs_on_thunk+0x35/0x3a
[ 1.396106] [<ffffffff8024a6be>] trace_hardirqs_on+0xef/0x113
[ 1.400107] [<ffffffff8020cda8>] child_rip+0xa/0x12
[ 1.404107] [<ffffffff8020c4bf>] restore_args+0x0/0x30
[ 1.408107] [<ffffffff8059b574>] kernel_init+0x0/0x2c8
[ 1.412107] [<ffffffff8020cd9e>] child_rip+0x0/0x12
[ 1.416106]
[ 1.513556] audit: initializing netlink socket (disabled)
[ 1.516129] type=2000 audit(1204128294.981:1): initialized
[ 1.520691] Total HugeTLB memory allocated, 0
[ 1.529894] io scheduler noop registered
[ 1.532102] io scheduler anticipatory registered (default)
[ 1.536101] io scheduler deadline registered
[ 1.540290] io scheduler cfq registered
[ 1.560157] pci 0000:01:03.0: Boot video device
[ 1.561200] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 1.561239] assign_interrupt_mode Found MSI capability
[ 1.564130] Allocate Port Service[0000:00:02.0:pcie00]
[ 1.564264] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 1.564303] assign_interrupt_mode Found MSI capability
[ 1.568127] Allocate Port Service[0000:00:03.0:pcie00]
[ 1.568260] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 1.568298] assign_interrupt_mode Found MSI capability
[ 1.572128] Allocate Port Service[0000:00:04.0:pcie00]
[ 1.572260] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 1.572299] assign_interrupt_mode Found MSI capability
[ 1.576128] Allocate Port Service[0000:00:05.0:pcie00]
[ 1.576263] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 1.576301] assign_interrupt_mode Found MSI capability
[ 1.580127] Allocate Port Service[0000:00:06.0:pcie00]
[ 1.580257] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 1.580296] assign_interrupt_mode Found MSI capability
[ 1.584128] Allocate Port Service[0000:00:07.0:pcie00]
[ 1.584263] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.584301] assign_interrupt_mode Found MSI capability
[ 1.588136] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.588270] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.588307] assign_interrupt_mode Found MSI capability
[ 1.592136] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.592505] PCI: Setting latency timer of device 0000:09:00.0 to 64
[ 1.596285] PCI: Setting latency timer of device 0000:0a:00.0 to 64
[ 1.597566] assign_interrupt_mode Found MSI capability
[ 1.607169] PCI: Setting latency timer of device 0000:0a:01.0 to 64
[ 1.608423] assign_interrupt_mode Found MSI capability
[ 1.618026] PCI: Setting latency timer of device 0000:0a:02.0 to 64
[ 1.619307] assign_interrupt_mode Found MSI capability
[ 1.625787] vga16fb: initializing
[ 1.625790] vga16fb: mapped to 0xffff8100000a0000
[ 1.818777] Console: switching to colour frame buffer device 80x30
[ 1.828120] fb0: VGA16 VGA frame buffer device
[ 1.696484] Real Time Clock Driver v1.12ac
[ 1.700440] hpet_resources: 0xfed00000 is busy
[ 1.700722] intel_rng: FWH not detected
[ 1.892183] Linux agpgart interface v0.103
[ 1.896172] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.729127] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.732329] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.736493] pnp: the driver 'serial' has been registered
[ 1.737018] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.740212] serial 00:09: driver attached
[ 1.741923] brd: module loaded
[ 1.744114] HP CISS Driver (v 3.6.14)
[ 1.748483] ACPI: PCI Interrupt 0000:0f:08.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 1.768430] cciss0: <0x3238> at PCI 0000:0f:08.0 IRQ 500 using DAC
[ 1.784121] blocks= 143305920 block_size= 512
[ 1.792121] heads=255, sectors=32, cylinders=17562
[ 1.792122]
[ 1.800121] blocks= 143305920 block_size= 512
[ 1.808122] heads=255, sectors=32, cylinders=17562
[ 1.808123]
[ 1.812361] blocks= 143305920 block_size= 512
[ 1.816256] heads=255, sectors=32, cylinders=17562
[ 1.816257]
[ 1.820121] cciss/c0d0: p2 < p5 p6 >
[ 1.829411] blocks= 143305920 block_size= 512
[ 1.832264] heads=255, sectors=32, cylinders=17562
[ 1.832265]
[ 1.836123] cciss/c0d1: unknown partition table
[ 1.852299] console [netcon0] enabled
[ 1.860143] netconsole: network logging started
[ 1.860145] pnp: the driver 'i8042 kbd' has been registered
[ 1.864134] i8042 kbd 00:06: driver attached
[ 1.864204] pnp: the driver 'i8042 aux' has been registered
[ 1.864220] i8042 aux 00:07: driver attached
[ 1.864290] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 5.535092] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.536381] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.540642] mice: PS/2 mouse device common for all mice
[ 5.544535] usbcore: registered new interface driver usbhid
[ 5.548366] /scratch/Ksrc/linux-git/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 5.552751] TCP bic registered
[ 5.556494] NET: Registered protocol family 1
[ 5.560378] NET: Registered protocol family 17
[ 1.960126] kjournald starting. Commit interval 5 seconds
[ 2.228143] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.228143] VFS: Mounted root (ext3 filesystem) readonly.
[ 2.228143] Freeing unused kernel memory: 320k freed
[ 3.194476] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 6.763225] Uniform Multi-Platform E-IDE driver
[ 6.764447] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 6.800398] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
[ 6.804456] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 6.804460] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.809424] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 6.817250] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.820453] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 6.820469] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf7df0000
[ 3.198464] USB Universal Host Controller Interface driver v3.0
[ 6.844454] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.844895] usb usb1: configuration #1 chosen from 1 choice
[ 6.845090] hub 1-0:1.0: USB hub found
[ 6.845182] hub 1-0:1.0: 8 ports detected
[ 3.248456] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.256244] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.256249] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.260307] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.264237] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000
[ 3.268409] usb usb2: configuration #1 chosen from 1 choice
[ 3.272252] hub 2-0:1.0: USB hub found
[ 3.276292] hub 2-0:1.0: 2 ports detected
[ 7.071027] input: Power Button (FF) as /devices/virtual/input/input1
[ 7.092474] ACPI: Power Button (FF) [PWRF]
[ 3.368327] ACPI: ACPI0007:00 is registered as cooling_device0
[ 3.372298] ACPI: ACPI0007:01 is registered as cooling_device1
[ 3.376419] ACPI: ACPI0007:06 is registered as cooling_device2
[ 3.802987] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 3.803001] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.803005] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.803092] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.803131] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020
[ 3.803325] usb usb3: configuration #1 chosen from 1 choice
[ 3.803366] hub 3-0:1.0: USB hub found
[ 3.803376] hub 3-0:1.0: 2 ports detected
[ 3.380350] ACPI: ACPI0007:07 is registered as cooling_device3
[ 3.904445] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.912259] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.912262] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.916604] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.920290] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040
[ 3.928342] usb usb4: configuration #1 chosen from 1 choice
[ 3.932279] hub 4-0:1.0: USB hub found
[ 3.936257] hub 4-0:1.0: 2 ports detected
[ 7.300901] ipmi message handler version 39.1
[ 6.652425] IPMI System Interface driver.
[ 6.652430] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[ 4.016457] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 4.016472] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 4.016475] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.016530] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 4.016568] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060
[ 4.016702] usb usb5: configuration #1 chosen from 1 choice
[ 4.016730] hub 5-0:1.0: USB hub found
[ 4.016737] hub 5-0:1.0: 2 ports detected
[ 4.120436] ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 22
[ 4.128272] uhci_hcd 0000:01:04.4: UHCI Host Controller
[ 4.132318] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6
[ 4.136275] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
[ 4.141136] uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800
[ 4.144619] usb usb6: configuration #1 chosen from 1 choice
[ 4.148306] hub 6-0:1.0: USB hub found
[ 4.152274] hub 6-0:1.0: 2 ports detected
[ 7.649203] ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
[ 7.656537] IPMI kcs interface initialized
[ 7.660512] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 4.260515] ESB2: IDE controller (0x8086:0x269e rev 0x09) at PCI slot 0000:00:1f.1
[ 4.260528] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 17
[ 4.260538] ESB2: not 100% native mode: will probe irqs later
[ 4.260556] ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:DMA, hdb:PIO
[ 4.260569] ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:PIO, hdd:PIO
[ 4.260578] Probing IDE interface ide0...
[ 7.664540] ipmi_si: duplicate interface
[ 3.938311] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 3.940419] ACPI: Thermal Zone [THM0] (8 C)
[ 4.080334] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 4.103056] usb 6-1: configuration #1 chosen from 1 choice
[ 7.920905] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/input/input2
[ 7.960562] input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
[ 7.975689] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/input/input3
[ 8.024609] input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
[ 8.268548] usb 6-2: new full speed USB device using uhci_hcd and address 3
[ 4.928583] hda: HL-DT-STDVD-ROM GDR-8084N, ATAPI CD/DVD-ROM drive
[ 4.937745] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.940534] hda: UDMA/33 mode selected
[ 4.948566] Probing IDE interface ide1...
[ 4.816319] usb 6-2: new full speed USB device using uhci_hcd and address 4
[ 4.876309] usb 6-2: configuration #1 chosen from 1 choice
[ 4.880321] hub 6-2:1.0: USB hub found
[ 4.890148] hub 6-2:1.0: 7 ports detected
[ 5.372692] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.129606] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.4 (February 18, 2008)
[ 8.096515] ib_mthca: Mellanox InfiniBand HCA driver v0.08 (February 14, 2006)
[ 8.096515] ib_mthca: Initializing 0000:13:00.0
[ 8.096515] ACPI: PCI Interrupt 0000:13:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 8.096515] PCI: Setting latency timer of device 0000:13:00.0 to 64
[ 5.132363] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 5.620925] eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:17:a4:47:2d:6e
[ 5.624396] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 6.024769] eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 17, node addr 00:17:a4:47:2d:6c
[ 9.159266] ib_mthca 0000:13:00.0: HCA FW version 5.1.400 is old (5.3.000 is current).
[ 9.160584] ib_mthca 0000:13:00.0: If you have problems, try updating your HCA FW.
[ 9.190121] ACPI: PCI Interrupt 0000:01:04.6[A] -> GSI 21 (level, low) -> IRQ 21
[ 9.196588] ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 21
[ 9.284668] Using irq 21
[ 10.176653] ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
[ 10.176678] IPMI kcs interface initialized
[ 9.437541] hda: ATAPI 24X DVD-ROM drive, 2048kB Cache
[ 9.447381] Uniform CD-ROM driver Revision: 3.20
[ 7.070327] Adding 2931820k swap on /dev/cciss/c0d0p5. Priority:-1 extents:1 across:2931820k
[ 10.184646] EXT3 FS on cciss/c0d0p6, internal journal
[ 8.240321] loop: module loaded
[ 8.198109] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 12.018913] fuse init (API version 7.9)
[ 8.932576] bnx2: eth1: using MSI
[ 9.200587] bnx2: eth0: using MSI
[ 12.423214] NET: Registered protocol family 10
[ 12.429057] lo: Disabled Privacy Extensions
[ 12.434391] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.437208] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 10.078646] bnx2: eth1 NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
[ 10.094122] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 13.244838] bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex
[ 13.249800] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.455984] RPC: Registered udp transport module.
[ 12.456790] RPC: Registered tcp transport module.
[ 15.080954] eth1: no IPv6 routers present
[ 21.545362] eth0: no IPv6 routers present
[ 1404.978545] ADDRCONF(NETDEV_UP): ib0: link is not ready
[ 2974.004057] ADDRCONF(NETDEV_CHANGE): ib0: link becomes ready
[ 2980.970490] ib0: no IPv6 routers present
[ 4313.025931] bnx2: eth1 NIC Copper Link is Down
[ 7336.422963] bnx2: eth1 NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
[ 8425.910898] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 8425.915097] hpwdt: New timer passed in is 30 seconds.
[ 8425.915139] BUG: unable to handle kernel paging request at ffffc20001a0a000
[ 8425.919087] IP: [<ffffffff8021dacc>] clflush_cache_range+0xc/0x25
[ 8425.919087] PGD 1bf80e067 PUD 1bf80f067 PMD 1bb497067 PTE 80000047000ee17b
[ 8425.919087] Oops: 0009 [1] SMP
[ 8425.919087] CPU 0
[ 8425.919087] Modules linked in: hpwdt(+) rdma_ucm rdma_cm iw_cm ib_addr ib_uverbs ib_ipoib ib_cm ib_sa nfs lockd nfs_acl sunrpc fan ac battery ipv6 fuse dm_snapshot dm_mirror dm_mod loop ide_cd_mod cdrom ide_pci_generic ib_mthca thermal ib_mad bnx2 piix evdev zlib_inflate ipmi_si ipmi_msghandler container processor button ib_core uhci_hcd ehci_hcd ide_core serio_raw psmouse pcspkr
[ 8425.919087] Pid: 3508, comm: modprobe Not tainted 2.6.25-rc3 #51
[ 8425.919087] RIP: 0010:[<ffffffff8021dacc>] [<ffffffff8021dacc>] clflush_cache_range+0xc/0x25
[ 8425.919087] RSP: 0000:ffff8101b5c25bc0 EFLAGS: 00010293
[ 8425.919087] RAX: ffff8101bb497050 RBX: 0000000000000000 RCX: 00000001bb497001
[ 8425.919087] RDX: ffffc20001a0afff RSI: 0000000000001000 RDI: ffffc20001a0a000
[ 8425.919087] RBP: ffffc20001a0a000 R08: ffff810000000000 R09: 00003ffffffff000
[ 8425.919087] R10: ffffc20001a0a000 R11: 000000008827b350 R12: ffff8101b5c25bf4
[ 8425.919087] R13: 0000000000000000 R14: 0000000000000001 R15: 800000000000017b
[ 8425.919087] FS: 00007f0136de96e0(0000) GS:ffffffff80567000(0000) knlGS:0000000000000000
[ 8425.919087] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 8425.919087] CR2: ffffc20001a0a000 CR3: 00000001b659c000 CR4: 00000000000006e0
[ 8425.919087] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8425.919087] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 8425.919087] Process modprobe (pid: 3508, threadinfo ffff8101b5c24000, task ffff8101b99d8000)
[ 8425.919087] Stack: ffffffff8021e60b ffffc20001a0b000 0000000000000018 0000000000000000
[ 8425.919087] 0000000100000001 00000000047000ee 0000000100001000 0000000000001000
[ 8425.919087] ffffc20001a0a000 00240047000ee000 ffff8101bb4c5c80 00240047000ee000
[ 8425.919087] Call Trace:
[ 8425.919087] [<ffffffff8021e60b>] ? change_page_attr_set_clr+0x140/0x18b
[ 8425.919087] [<ffffffff8021d94c>] ? __ioremap+0x197/0x1cd
[ 8425.919087] [<ffffffff88279566>] ? :hpwdt:hpwdt_init_one+0x1c3/0x386
[ 8425.919087] [<ffffffff803351fe>] ? pci_device_probe+0xb3/0xfb
[ 8425.919087] [<ffffffff80393ffe>] ? driver_probe_device+0xb5/0x132
[ 8425.919087] [<ffffffff8039411d>] ? __driver_attach+0x0/0x93
[ 8425.919087] [<ffffffff80394177>] ? __driver_attach+0x5a/0x93
[ 8425.919087] [<ffffffff803933fa>] ? bus_for_each_dev+0x47/0x72
[ 8425.919087] [<ffffffff80393c1e>] ? bus_add_driver+0xb1/0x1fb
[ 8425.919087] [<ffffffff80394391>] ? driver_register+0x59/0xce
[ 8425.919087] [<ffffffff80335487>] ? __pci_register_driver+0x5a/0x8b
[ 8425.919087] [<ffffffff802526a1>] ? sys_init_module+0x18ff/0x1a08
[ 8425.919087] [<ffffffff8023ea31>] ? param_get_int+0x0/0x14
[ 8425.919087] [<ffffffff8024a6be>] ? trace_hardirqs_on+0xef/0x113
[ 8425.919087] [<ffffffff8041e1fa>] ? trace_hardirqs_on_thunk+0x35/0x3a
[ 8425.919087] [<ffffffff8020be5b>] ? system_call_after_swapgs+0x7b/0x80
[ 8425.919087]
[ 8425.919087]
[ 8425.919087] Code: 00 e8 de 09 02 00 31 d2 48 85 c0 74 0d 48 8b 40 08 b2 01 48 89 83 80 00 00 00 5b 89 d0 c3 90 89 f6 48 8d 54 37 ff 0f ae f0 eb 0d <0f> ae 3f 0f b7 05 4e ce 36 00 48 01 c7 48 39 d7 72 ee 0f ae 3a
[ 8425.919087] RIP [<ffffffff8021dacc>] clflush_cache_range+0xc/0x25
[ 8425.919087] RSP <ffff8101b5c25bc0>
[ 8425.919087] CR2: ffffc20001a0a000
[ 8425.927907] ---[ end trace d0c1967e01c1d63f ]---
next prev parent reply other threads:[~2008-02-27 18:38 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-27 17:08 hpwdt oops in clflush_cache_range Roland Dreier
2008-02-27 17:37 ` Mingarelli, Thomas
2008-02-27 18:14 ` Thomas Gleixner
2008-02-27 18:38 ` Roland Dreier [this message]
2008-02-27 19:48 ` Thomas Gleixner
2008-02-27 20:36 ` Ingo Molnar
2008-02-27 20:42 ` Thomas Gleixner
2008-02-27 20:44 ` Ingo Molnar
2008-02-27 20:59 ` Thomas Gleixner
2008-02-27 21:14 ` Ingo Molnar
2008-02-27 21:17 ` Roland Dreier
2008-02-27 21:35 ` Roland Dreier
2008-02-27 23:44 ` Mingarelli, Thomas
2008-02-28 0:12 ` Roland Dreier
2008-02-28 3:09 ` Mingarelli, Thomas
[not found] ` <E14D1C2A44812C4F9C3ED321127EDF6505829D5D6C@G3W0854.americas.hpqcorp.net>
2008-02-28 17:38 ` [PATCH] [WATCHDOG] Fix declaration of struct smbios_entry_point in hpwdt Roland Dreier
2008-02-28 17:48 ` [PATCH for 2.6.26] [WATCHDOG] Fix return value warning " Roland Dreier
2008-02-28 20:34 ` [PATCH] [WATCHDOG] hpwdt: Use dmi_walk() instead of own copy Roland Dreier
2008-02-28 21:24 ` Mingarelli, Thomas
2008-02-28 21:26 ` Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ada1w6y1bzk.fsf@cisco.com \
--to=rdreier@cisco.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=thomas.mingarelli@hp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.