From: Roland Dreier <rdreier@cisco.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@osdl.org>, linux-kernel@vger.kernel.org
Subject: Re: [patch, -rc5-mm1] lock validator: fix RT_HASH_LOCK_SZ
Date: Tue, 30 May 2006 13:43:40 -0700 [thread overview]
Message-ID: <ada1wub6y6b.fsf@cisco.com> (raw)
In-Reply-To: <20060530202654.GA25720@elte.hu> (Ingo Molnar's message of "Tue, 30 May 2006 22:26:54 +0200")
[-- Attachment #1: Type: text/plain, Size: 283 bytes --]
> on lockdep we have a quite big spinlock_t, so keep the size down.
Yes, that builds fine.
However the kernel won't boot for me... it oopses early on in
save_stack_trace(). I'm attaching a bootlog, plus another try booting
with nmi_watchdog=0, plus my config.
Thanks,
Roland
[-- Attachment #2: lockdep-boot.txt --]
[-- Type: text/plain, Size: 21671 bytes --]
[ 0.000000] Bootdata ok (command line is root=/dev/sda3 ro console=ttyS0,38400 ) *
[ 0.000000] Linux version 2.6.17-rc5-mm1 (root@roland-microway-1) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #4 SMP Tue May 30 12:43:27 PDT 2006 *
[ 0.000000] BIOS-provided physical RAM map: *
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) *
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) *
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) *
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)*****
[ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfffe000 - 00000000e0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] DMI 2.3 present.
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1
[ 0.000000] SRAT: PXM 2 -> APIC 4 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 5 -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 6 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 7 -> Node 3
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] SRAT: Node 1 PXM 1 80000000-e0000000
[ 0.000000] SRAT: Node 2 PXM 2 120000000-1a0000000
[ 0.000000] SRAT: Node 3 PXM 3 1a0000000-220000000
[ 0.000000] SRAT: Node 1 PXM 1 80000000-120000000
[ 0.000000] SRAT: Node 0 PXM 0 0-80000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000080000000
[ 0.000000] Bootmem setup node 1 0000000080000000-0000000120000000
[ 0.000000] Bootmem setup node 2 0000000120000000-00000001a0000000
[ 0.000000] Bootmem setup node 3 00000001a0000000-0000000220000000
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:1 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:1 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] Processor #2 15:1 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] Processor #3 15:1 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] Processor #4 15:1 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] Processor #5 15:1 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] Processor #6 15:1 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] Processor #7 15:1 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x0d] address[0xfeafe000] gsi_base[40])
[ 0.000000] IOAPIC[1]: apic_id 13, version 17, address 0xfeafe000, GSI 40-46
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfeaff000] gsi_base[47])
[ 0.000000] IOAPIC[2]: apic_id 14, version 17, address 0xfeaff000, GSI 47-53
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
[ 0.000000] Built 4 zonelists
[ 0.000000] Kernel command line: root=/dev/sda3 ro console=ttyS0,38400
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 56.029324] Console: colour VGA+ 80x25
[ 57.128874] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 57.152019] ... MAX_LOCKDEP_SUBTYPES: 8
[ 57.164264] ... MAX_LOCK_DEPTH: 30
[ 57.176769] ... MAX_LOCKDEP_KEYS: 2048
[ 57.189794] ... TYPEHASH_SIZE: 1024
[ 57.202817] ... MAX_LOCKDEP_ENTRIES: 8192
[ 57.215842] ... MAX_LOCKDEP_CHAINS: 8192
[ 57.228865] ... CHAINHASH_SIZE: 4096
[ 57.241890] memory used by lock dependency info: 1120 kB
[ 57.258026] per task-struct memory footprint: 1440 bytes
[ 57.274164] ------------------------
[ 57.284852] | Locking API testsuite:
[ 57.295542] ----------------------------------------------------------------------------
[ 57.319722] | spin |wlock |rlock |mutex | wsem | rsem |
[ 57.343903] --------------------------------------------------------------------------
[ 57.368088] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 57.393240] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 57.418380] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 57.443526] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 57.468692] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 57.493903] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 57.519043] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 57.544190] double unlock: ok | ok | ok | ok | ok | ok |
[ 57.569355] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 57.594522] --------------------------------------------------------------------------
[ 57.618703] recursive read-lock: | ok | | ok |
[ 57.643348] --------------------------------------------------------------------------
[ 57.667529] non-nested unlock: ok | ok | ok | ok |
[ 57.688743] ------------------------------------------------------------
[ 57.709274] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 57.728516] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 57.747747] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 57.766997] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 57.786242] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 57.805466] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 57.824698] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 57.843948] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 57.863192] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 57.882424] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 57.901674] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 57.920918] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 57.940142] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 57.959374] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 57.978624] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 57.997869] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 58.017100] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 58.036350] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 58.055593] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 58.074819] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 58.094049] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 58.113300] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 58.132544] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 58.151776] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 58.171026] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 58.190270] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 58.209494] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 58.228726] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 58.247976] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 58.267221] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 58.286451] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 58.305702] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 58.324945] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 58.344171] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 58.363401] hard-irq lock-inversion/123: ok | ok | ok |
[ 58.382652] soft-irq lock-inversion/123: ok | ok | ok |
[ 58.401897] hard-irq lock-inversion/132: ok | ok | ok |
[ 58.421121] soft-irq lock-inversion/132: ok | ok | ok |
[ 58.440353] hard-irq lock-inversion/213: ok | ok | ok |
[ 58.459603] soft-irq lock-inversion/213: ok | ok | ok |
[ 58.478846] hard-irq lock-inversion/231: ok | ok | ok |
[ 58.498078] soft-irq lock-inversion/231: ok | ok | ok |
[ 58.517328] hard-irq lock-inversion/312: ok | ok | ok |
[ 58.536572] soft-irq lock-inversion/312: ok | ok | ok |
[ 58.555797] hard-irq lock-inversion/321: ok | ok | ok |
[ 58.575028] soft-irq lock-inversion/321: ok | ok | ok |
[ 58.594279] hard-irq read-recursion/123: ok |
[ 58.609579] soft-irq read-recursion/123: ok |
[ 58.624867] hard-irq read-recursion/132: ok |
[ 58.640174] soft-irq read-recursion/132: ok |
[ 58.655474] hard-irq read-recursion/213: ok |
[ 58.670762] soft-irq read-recursion/213: ok |
[ 58.686190] hard-irq read-recursion/231: ok |
[ 58.701473] soft-irq read-recursion/231: ok |
[ 58.716761] hard-irq read-recursion/312: ok |
[ 58.732061] soft-irq read-recursion/312: ok |
[ 58.747343] hard-irq read-recursion/321: ok |
[ 58.762631] soft-irq read-recursion/321: ok |
[ 58.777930] -------------------------------------------------------
[ 58.796645] Good, all 210 testcases passed! |
[ 58.809668] ---------------------------------
[ 58.828152] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 58.857504] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 58.880979] Checking aperture...
[ 58.890646] CPU 0: aperture @ 4000000 size 32 MB
[ 58.904442] Aperture too small (32 MB)
[ 58.920442] No AGP bridge found
[ 58.929815] Your BIOS doesn't leave a aperture memory hole
[ 58.946212] Please enable the IOMMU option in the BIOS setup
[ 58.963128] This costs you 64 MB of RAM
[ 59.019026] Mapping aperture over 65536 KB of RAM @ 4000000
[ 59.189225] Memory: 7987980k/8912896k available (2295k kernel code, 400176k reserved, 1237k data, 240k init)
[ 59.279159] Calibrating delay using timer specific routine.. 5202.67 BogoMIPS (lpj=2601335)
[ 59.304560] Security Framework v1.0.0 initialized
[ 59.318618] SELinux: Disabled at boot.
[ 59.330083] Capability LSM initialized
[ 59.341481] Mount-cache hash table entries: 256
[ 59.355549] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 59.376861] CPU: L2 Cache: 1024K (64 bytes/line)
[ 59.390661] CPU 0/0(2) -> Node 0 -> Core 0
[ 59.402918] Freeing SMP alternatives: 24k freed
[ 59.437194] Using local APIC timer interrupts.
[ 59.488839] result 12500042
[ 59.497183] Detected 12.500 MHz APIC timer.
[ 59.511667] lockdep: not fixing up alternatives.
[ 59.525490] Booting processor 1/8 APIC 0x1
[ 59.548003] Initializing CPU#1
[ 59.608395] Calibrating delay using timer specific routine.. 5199.26 BogoMIPS (lpj=2599631)
[ 59.608402] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 59.608404] CPU: L2 Cache: 1024K (64 bytes/line)
[ 59.608407] CPU 1/1(2) -> Node 0 -> Core 1
[ 59.608528] Dual Core AMD Opteron(tm) Processor 885 stepping 02
[ 59.609404] CPU 1: Syncing TSC to CPU 0.
[ 59.609554] CPU 1: synchronized TSC with CPU 0 (last diff 22 cycles, maxerr 944 cycles)
[ 59.610418] lockdep: not fixing up alternatives.
[ 59.758943] Booting processor 2/8 APIC 0x2
[ 59.781534] Initializing CPU#2
[ 59.841857] Calibrating delay using timer specific routine.. 5199.32 BogoMIPS (lpj=2599663)
[ 59.841865] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 59.841867] CPU: L2 Cache: 1024K (64 bytes/line)
[ 59.841870] CPU 2/2(2) -> Node 1 -> Core 0
[ 59.841986] Dual Core AMD Opteron(tm) Processor 885 stepping 02
[ 59.842874] CPU 2: Syncing TSC to CPU 0.
[ 59.843019] CPU 2: synchronized TSC with CPU 0 (last diff 155 cycles, maxerr 730 cycles)
[ 59.843862] lockdep: not fixing up alternatives.
[ 59.992620] Booting processor 3/8 APIC 0x3
[ 60.015131] Initializing CPU#3
[ 60.075319] Calibrating delay using timer specific routine.. 5199.33 BogoMIPS (lpj=2599665)
[ 60.075326] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 60.075329] CPU: L2 Cache: 1024K (64 bytes/line)
[ 60.075331] CPU 3/3(2) -> Node 1 -> Core 1
[ 60.075449] Dual Core AMD Opteron(tm) Processor 885 stepping 02
[ 60.076336] CPU 3: Syncing TSC to CPU 0.
[ 60.076482] CPU 3: synchronized TSC with CPU 0 (last diff -166 cycles, maxerr 1004 cycles)
[ 60.077496] lockdep: not fixing up alternatives.
[ 60.226736] Booting processor 4/8 APIC 0x4
[ 60.249256] Initializing CPU#4
[ 60.309778] Calibrating delay using timer specific routine.. 5199.32 BogoMIPS (lpj=2599663)
[ 60.309786] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 60.309788] CPU: L2 Cache: 1024K (64 bytes/line)
[ 60.309791] CPU 4/4(2) -> Node 2 -> Core 0
[ 60.309907] Dual Core AMD Opteron(tm) Processor 885 stepping 02
[ 60.310793] CPU 4: Syncing TSC to CPU 0.
[ 60.310940] CPU 4: synchronized TSC with CPU 0 (last diff 16 cycles, maxerr 1001 cycles)
[ 60.311951] lockdep: not fixing up alternatives.
[ 60.460683] Booting processor 5/8 APIC 0x5
[ 60.483272] Initializing CPU#5
[ 60.543240] Calibrating delay using timer specific routine.. 5199.32 BogoMIPS (lpj=2599663)
[ 60.543248] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 60.543250] CPU: L2 Cache: 1024K (64 bytes/line)
[ 60.543252] CPU 5/5(2) -> Node 2 -> Core 1
[ 60.543366] Dual Core AMD Opteron(tm) Processor 885 stepping 02
[ 60.544255] CPU 5: Syncing TSC to CPU 0.
[ 60.544400] CPU 5: synchronized TSC with CPU 0 (last diff 14 cycles, maxerr 1000 cycles)
[ 60.545438] lockdep: not fixing up alternatives.
[ 60.694228] Booting processor 6/8 APIC 0x6
[ 60.716743] Initializing CPU#6
[ 60.777700] Calibrating delay using timer specific routine.. 5199.34 BogoMIPS (lpj=2599670)
[ 60.777708] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 60.777711] CPU: L2 Cache: 1024K (64 bytes/line)
[ 60.777713] CPU 6/6(2) -> Node 3 -> Core 0
[ 60.777871] Dual Core AMD Opteron(tm) Processor 885 stepping 02
[ 60.778711] CPU 6: Syncing TSC to CPU 0.
[ 60.778953] CPU 6: synchronized TSC with CPU 0 (last diff -2 cycles, maxerr 1731 cycles)
[ 60.779972] lockdep: not fixing up alternatives.
[ 60.928707] Booting processor 7/8 APIC 0x7
[ 60.951227] Initializing CPU#7
[ 61.012159] Calibrating delay using timer specific routine.. 5199.32 BogoMIPS (lpj=2599663)
[ 61.012168] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 61.012170] CPU: L2 Cache: 1024K (64 bytes/line)
[ 61.012172] CPU 7/7(2) -> Node 3 -> Core 1
[ 61.012326] Dual Core AMD Opteron(tm) Processor 885 stepping 02
[ 61.013175] CPU 7: Syncing TSC to CPU 0.
[ 61.013417] CPU 7: synchronized TSC with CPU 0 (last diff 3 cycles, maxerr 1744 cycles)
[ 61.013431] Brought up 8 CPUs
[ 61.157095] lockdep: disabled NMI watchdog.
[ 61.158090] Uhhuh. NMI received for unknown reason 3d.
[ 61.158093] Do you have a strange power saving mode enabled?
[ 61.158094] Dazed and confused, but trying to continue
[ 61.162927] Uhhuh. NMI received for unknown reason 00.
[ 61.162931] Do you have a strange power saving mode enabled?
[ 61.162932] Dazed and confused, but trying to continue
[ 61.169946] Uhhuh. NMI received for unknown reason 00.
[ 61.169950] Do you have a strange power saving mode enabled?
[ 61.169951] Dazed and confused, but trying to continue
[ 61.176804] Uhhuh. NMI received for unknown reason 00.
[ 61.176807] Do you have a strange power saving mode enabled?
[ 61.176809] Dazed and confused, but trying to continue
[ 61.176827] Uhhuh. NMI received for unknown reason 00.
[ 61.176831] Do you have a strange power saving mode enabled?
[ 61.176833] Dazed and confused, but trying to continue
[ 61.227863] Uhhuh. NMI received for unknown reason 00.
[ 61.227866] Do you have a strange power saving mode enabled?
[ 61.227868] Dazed and confused, but trying to continue
[ 61.240686] Uhhuh. NMI received for unknown reason 00.
[ 61.240689] Do you have a strange power saving mode enabled?
[ 61.240691] Dazed and confused, but trying to continue
[ 61.259831] Uhhuh. NMI received for unknown reason 00.
[ 61.259834] Do you have a strange power saving mode enabled?
[ 61.259836] Dazed and confused, but trying to continue
[ 61.550383] Disabling vsyscall due to use of PM timer
[ 61.565483] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
[ 61.582653] time.c: Detected 2600.005 MHz processor.
[ 61.767031] migration_cost=368,399
[ 61.781565] NET: Registered protocol family 16
[ 61.794960] ACPI: bus type pci registered
[ 61.806947] PCI: Using configuration type 1
[ 61.819557] Unable to handle kernel paging request at 0000000100000007 RIP:
[ 61.833350] [<ffffffff8020c82b>] save_stack_trace+0x187/0x234
[ 61.858177] PGD 0
[ 61.864248] Oops: 0000 [1] SMP
[ 61.873744] last sysfs file:
[ 61.882617] CPU 2
[ 61.888688] Modules linked in:
[ 61.897873] Pid: 34, comm: khelper Not tainted 2.6.17-rc5-mm1 #4
[ 61.915825] RIP: 0010:[<ffffffff8020c82b>] [<ffffffff8020c82b>] save_stack_trace+0x187/0x234
[ 61.940837] RSP: 0000:ffff81019b51da48 EFLAGS: 00010046
[ 61.957259] RAX: 0000000000000001 RBX: ffff81019b51dab8 RCX: ffffffff805c85e8
[ 61.978585] RDX: 0000000000000001 RSI: 0000000000000009 RDI: ffff81019b51e000
[ 61.999911] RBP: ffff81019b51dab8 R08: 00000000ffffffff R09: 0000000000000000
[ 62.021238] R10: ffffffffffffffff R11: ffffffff805a4d18 R12: ffffffff807723f8
[ 62.042563] R13: ffff81011a295080 R14: ffff81011a295080 R15: 0000000000000000
[ 62.063890] FS: 0000000000000000(0000) GS:ffff81011a4d9e40(0000) knlGS:0000000000000000
[ 62.088068] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 62.105243] CR2: 0000000100000007 CR3: 0000000000201000 CR4: 00000000000006e0
[ 62.126571] Process khelper (pid: 34, threadinfo ffff81019b51c000, task ffff81011a295080)
[ 62.151008] Stack: 0000000000000003 ffff81019b51da58 ffff81019b51e000 ffffffff80248484
[ 62.174617] 0000000000000000 0000000000000001 ffffffff804bc5c8 ffff81019b51dab8
[ 62.198770] 0000000000000000 ffffffff807723f8
[ 62.214001] Call Trace:
[ 62.221866] [<ffffffff80248484>] __lockdep_acquire+0xa98/0xad2
[ 62.239612] [<ffffffff80246cab>] save_trace+0x3e/0xe6
[ 62.255020] [<ffffffff80246e43>] add_lock_to_list+0x79/0xa0
[ 62.271988] [<ffffffff8024837d>] __lockdep_acquire+0x991/0xad2
[ 62.289735] [<ffffffff8022bec4>] copy_process+0x1314/0x1816
[ 62.306676] [<ffffffff802488a5>] lockdep_acquire+0x82/0xa3
[ 62.323384] [<ffffffff8043af82>] _spin_lock+0x1c/0x28
[ 62.338794] [<ffffffff8022bec4>] copy_process+0x1314/0x1816
[ 62.355763] [<ffffffff8043b33f>] _spin_unlock_irq+0x28/0x2e
[ 62.372729] [<ffffffff8023f3cc>] alloc_pid+0x2b1/0x2d9
[ 62.388399] [<ffffffff8022c4c8>] do_fork+0x102/0x236
[ 62.403525] [<ffffffff8023f35e>] alloc_pid+0x243/0x2d9
[ 62.419170] [<ffffffff80247268>] mark_lock+0x3b/0x4fc
[ 62.434580] [<ffffffff80247268>] mark_lock+0x3b/0x4fc
[ 62.449993] [<ffffffff8020a51d>] kernel_thread+0x81/0xde
[ 62.466180] [<ffffffff8023e38b>] run_workqueue+0x17/0x10f
[ 62.482629] [<ffffffff8023df29>] ____call_usermodehelper+0x0/0x10e
[ 62.501386] [<ffffffff8020a57a>] child_rip+0x0/0x12
[ 62.516277] [<ffffffff8023ddc5>] __call_usermodehelper+0x32/0x4d
[ 62.534543] [<ffffffff8023e42d>] run_workqueue+0xb9/0x10f
[ 62.550990] [<ffffffff8023dd93>] __call_usermodehelper+0x0/0x4d
[ 62.568996] [<ffffffff8023e539>] worker_thread+0x0/0x128
[ 62.585185] [<ffffffff8023e62e>] worker_thread+0xf5/0x128
[ 62.601635] [<ffffffff802276bf>] default_wake_function+0x0/0xf
[ 62.619381] [<ffffffff8023e539>] worker_thread+0x0/0x128
[ 62.635569] [<ffffffff80241cba>] kthread+0xd1/0xfb
[ 62.650201] [<ffffffff8023e539>] worker_thread+0x0/0x128
[ 62.666389] [<ffffffff8020a582>] child_rip+0x8/0x12
[ 62.681282] [<ffffffff8043b33f>] _spin_unlock_irq+0x28/0x2e
[ 62.698224] [<ffffffff80209bcf>] restore_args+0x0/0x30
[ 62.713896] [<ffffffff80241be9>] kthread+0x0/0xfb
[ 62.728267] [<ffffffff8020a57a>] child_rip+0x0/0x12
[ 62.743132]
[ 62.747595]
[ 62.747595] Code: 4d 8b 50 08 75 1b 41 8b 14 24 49 8b 4c 24 08 49 8d 42 ff 89
[ 62.774758] RIP [<ffffffff8020c82b>] save_stack_trace+0x187/0x234 RSP <ffff81019b51da48>
[ 62.799301] CR2: 0000000100000007
[-- Attachment #3: lockdep-boot-nonmi.txt --]
[-- Type: text/plain, Size: 20261 bytes --]
[ 0.000000] Bootdata ok (command line is root=/dev/sda3 ro console=ttyS0,38400 nmi_watchdog=0)
[ 0.000000] Linux version 2.6.17-rc5-mm1 (root@roland-microway-1) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #4 SMP Tue May 30 12:43:27 PDT 2006 *
[ 0.000000] BIOS-provided physical RAM map: *
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) *
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) *
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) *
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)*****
[ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfffe000 - 00000000e0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] DMI 2.3 present.
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1
[ 0.000000] SRAT: PXM 2 -> APIC 4 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 5 -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 6 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 7 -> Node 3
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] SRAT: Node 1 PXM 1 80000000-e0000000
[ 0.000000] SRAT: Node 2 PXM 2 120000000-1a0000000
[ 0.000000] SRAT: Node 3 PXM 3 1a0000000-220000000
[ 0.000000] SRAT: Node 1 PXM 1 80000000-120000000
[ 0.000000] SRAT: Node 0 PXM 0 0-80000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000080000000
[ 0.000000] Bootmem setup node 1 0000000080000000-0000000120000000
[ 0.000000] Bootmem setup node 2 0000000120000000-00000001a0000000
[ 0.000000] Bootmem setup node 3 00000001a0000000-0000000220000000
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:1 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:1 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] Processor #2 15:1 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] Processor #3 15:1 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] Processor #4 15:1 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] Processor #5 15:1 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] Processor #6 15:1 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] Processor #7 15:1 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x0d] address[0xfeafe000] gsi_base[40])
[ 0.000000] IOAPIC[1]: apic_id 13, version 17, address 0xfeafe000, GSI 40-46
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfeaff000] gsi_base[47])
[ 0.000000] IOAPIC[2]: apic_id 14, version 17, address 0xfeaff000, GSI 47-53
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
[ 0.000000] Built 4 zonelists
[ 0.000000] Kernel command line: root=/dev/sda3 ro console=ttyS0,38400 nmi_watchdog=0
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 63.998993] Console: colour VGA+ 80x25
[ 65.106316] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 65.129462] ... MAX_LOCKDEP_SUBTYPES: 8
[ 65.141707] ... MAX_LOCK_DEPTH: 30
[ 65.154212] ... MAX_LOCKDEP_KEYS: 2048
[ 65.167237] ... TYPEHASH_SIZE: 1024
[ 65.180261] ... MAX_LOCKDEP_ENTRIES: 8192
[ 65.193284] ... MAX_LOCKDEP_CHAINS: 8192
[ 65.206308] ... CHAINHASH_SIZE: 4096
[ 65.219332] memory used by lock dependency info: 1120 kB
[ 65.235537] per task-struct memory footprint: 1440 bytes
[ 65.251659] ------------------------
[ 65.262348] | Locking API testsuite:
[ 65.273036] ----------------------------------------------------------------------------
[ 65.297217] | spin |wlock |rlock |mutex | wsem | rsem |
[ 65.321397] --------------------------------------------------------------------------
[ 65.345583] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 65.370735] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 65.395874] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 65.421014] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 65.446161] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 65.471326] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 65.496538] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 65.521677] double unlock: ok | ok | ok | ok | ok | ok |
[ 65.546825] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 65.571990] --------------------------------------------------------------------------
[ 65.596172] recursive read-lock: | ok | | ok |
[ 65.620818] --------------------------------------------------------------------------
[ 65.644999] non-nested unlock: ok | ok | ok | ok |
[ 65.666213] ------------------------------------------------------------
[ 65.686742] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 65.705985] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 65.725209] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 65.744441] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 65.763692] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 65.782935] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 65.802159] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 65.821391] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 65.840641] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 65.859885] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 65.879117] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 65.898368] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 65.917611] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 65.936836] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 65.956067] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 65.975318] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 65.994561] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 66.013792] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 66.033043] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 66.052288] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 66.071512] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 66.090744] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 66.109994] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 66.129237] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 66.148468] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 66.167720] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 66.186963] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 66.206188] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 66.225419] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 66.244670] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 66.263914] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 66.283145] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 66.302396] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 66.321873] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 66.341104] hard-irq lock-inversion/123: ok | ok | ok |
[ 66.360355] soft-irq lock-inversion/123: ok | ok | ok |
[ 66.379598] hard-irq lock-inversion/132: ok | ok | ok |
[ 66.398830] soft-irq lock-inversion/132: ok | ok | ok |
[ 66.418081] hard-irq lock-inversion/213: ok | ok | ok |
[ 66.437324] soft-irq lock-inversion/213: ok | ok | ok |
[ 66.456549] hard-irq lock-inversion/231: ok | ok | ok |
[ 66.475780] soft-irq lock-inversion/231: ok | ok | ok |
[ 66.495030] hard-irq lock-inversion/312: ok | ok | ok |
[ 66.514275] soft-irq lock-inversion/312: ok | ok | ok |
[ 66.533506] hard-irq lock-inversion/321: ok | ok | ok |
[ 66.552756] soft-irq lock-inversion/321: ok | ok | ok |
[ 66.572000] hard-irq read-recursion/123: ok |
[ 66.587282] soft-irq read-recursion/123: ok |
[ 66.602569] hard-irq read-recursion/132: ok |
[ 66.617870] soft-irq read-recursion/132: ok |
[ 66.633151] hard-irq read-recursion/213: ok |
[ 66.648438] soft-irq read-recursion/213: ok |
[ 66.663745] hard-irq read-recursion/231: ok |
[ 66.679046] soft-irq read-recursion/231: ok |
[ 66.694333] hard-irq read-recursion/312: ok |
[ 66.709641] soft-irq read-recursion/312: ok |
[ 66.724941] hard-irq read-recursion/321: ok |
[ 66.740229] soft-irq read-recursion/321: ok |
[ 66.755536] -------------------------------------------------------
[ 66.774269] Good, all 210 testcases passed! |
[ 66.787292] ---------------------------------
[ 66.805780] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 66.835368] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 66.858851] Checking aperture...
[ 66.868500] CPU 0: aperture @ 8016000000 size 32 MB
[ 66.883078] Aperture too small (32 MB)
[ 66.899307] No AGP bridge found
[ 66.908685] Your BIOS doesn't leave a aperture memory hole
[ 66.925081] Please enable the IOMMU option in the BIOS setup
[ 66.941997] This costs you 64 MB of RAM
[ 66.997926] Mapping aperture over 65536 KB of RAM @ 4000000
[ 67.168352] Memory: 7987980k/8912896k available (2295k kernel code, 400176k reserved, 1237k data, 240k init)
[ 67.257820] Calibrating delay using timer specific routine.. 5202.67 BogoMIPS (lpj=2601339)
[ 67.283222] Security Framework v1.0.0 initialized
[ 67.297280] SELinux: Disabled at boot.
[ 67.308744] Capability LSM initialized
[ 67.320144] Mount-cache hash table entries: 256
[ 67.334212] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 67.355523] CPU: L2 Cache: 1024K (64 bytes/line)
[ 67.369324] CPU 0/0(2) -> Node 0 -> Core 0
[ 67.381581] Freeing SMP alternatives: 24k freed
[ 67.415858] Using local APIC timer interrupts.
[ 67.467501] result 12500031
[ 67.475844] Detected 12.500 MHz APIC timer.
[ 67.490346] lockdep: not fixing up alternatives.
[ 67.504180] Booting processor 1/8 APIC 0x1
[ 67.526690] Initializing CPU#1
[ 67.587056] Calibrating delay using timer specific routine.. 5199.33 BogoMIPS (lpj=2599668)
[ 67.587063] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 67.587065] CPU: L2 Cache: 1024K (64 bytes/line)
[ 67.587068] CPU 1/1(2) -> Node 0 -> Core 1
[ 67.587188] Dual Core AMD Opteron(tm) Processor 885 stepping 02
[ 67.588070] CPU 1: Syncing TSC to CPU 0.
[ 67.588218] CPU 1: synchronized TSC with CPU 0 (last diff 1 cycles, maxerr 985 cycles)
[ 67.589100] lockdep: not fixing up alternatives.
[ 67.737528] Booting processor 2/8 APIC 0x2
[ 67.760036] Initializing CPU#2
[ 67.820518] Calibrating delay using timer specific routine.. 5199.25 BogoMIPS (lpj=2599628)
[ 67.820525] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 67.820527] CPU: L2 Cache: 1024K (64 bytes/line)
[ 67.820530] CPU 2/2(2) -> Node 1 -> Core 0
[ 67.820646] Dual Core AMD Opteron(tm) Processor 885 stepping 02
[ 67.821530] CPU 2: Syncing TSC to CPU 0.
[ 67.821674] CPU 2: synchronized TSC with CPU 0 (last diff 159 cycles, maxerr 732 cycles)
[ 67.822534] lockdep: not fixing up alternatives.
[ 67.971260] Booting processor 3/8 APIC 0x3
[ 67.993768] Initializing CPU#3
[ 68.053980] Calibrating delay using timer specific routine.. 5199.33 BogoMIPS (lpj=2599665)
[ 68.053987] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 68.053989] CPU: L2 Cache: 1024K (64 bytes/line)
[ 68.053992] CPU 3/3(2) -> Node 1 -> Core 1
[ 68.054109] Dual Core AMD Opteron(tm) Processor 885 stepping 02
[ 68.054992] CPU 3: Syncing TSC to CPU 0.
[ 68.055138] CPU 3: synchronized TSC with CPU 0 (last diff 17 cycles, maxerr 1019 cycles)
[ 68.056166] lockdep: not fixing up alternatives.
[ 68.204907] Booting processor 4/8 APIC 0x4
[ 68.227421] Initializing CPU#4
[ 68.287441] Calibrating delay using timer specific routine.. 5199.25 BogoMIPS (lpj=2599628)
[ 68.287449] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 68.287451] CPU: L2 Cache: 1024K (64 bytes/line)
[ 68.287454] CPU 4/4(2) -> Node 2 -> Core 0
[ 68.287570] Dual Core AMD Opteron(tm) Processor 885 stepping 02
[ 68.288454] CPU 4: Syncing TSC to CPU 0.
[ 68.288599] CPU 4: synchronized TSC with CPU 0 (last diff 156 cycles, maxerr 728 cycles)
[ 68.289627] lockdep: not fixing up alternatives.
[ 68.438361] Booting processor 5/8 APIC 0x5
[ 68.460866] Initializing CPU#5
[ 68.520903] Calibrating delay using timer specific routine.. 5199.33 BogoMIPS (lpj=2599666)
[ 68.520911] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 68.520913] CPU: L2 Cache: 1024K (64 bytes/line)
[ 68.520915] CPU 5/5(2) -> Node 2 -> Core 1
[ 68.521030] Dual Core AMD Opteron(tm) Processor 885 stepping 02
[ 68.521913] CPU 5: Syncing TSC to CPU 0.
[ 68.522059] CPU 5: synchronized TSC with CPU 0 (last diff -157 cycles, maxerr 1002 cycles)
[ 68.523119] lockdep: not fixing up alternatives.
[ 68.672370] Booting processor 6/8 APIC 0x6
[ 68.694888] Initializing CPU#6
[ 68.755363] Calibrating delay using timer specific routine.. 5199.26 BogoMIPS (lpj=2599632)
[ 68.755372] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 68.755373] CPU: L2 Cache: 1024K (64 bytes/line)
[ 68.755376] CPU 6/6(2) -> Node 3 -> Core 0
[ 68.755505] Dual Core AMD Opteron(tm) Processor 885 stepping 02
[ 68.756372] CPU 6: Syncing TSC to CPU 0.
[ 68.756607] CPU 6: synchronized TSC with CPU 0 (last diff -2 cycles, maxerr 1731 cycles)
[ 68.757636] lockdep: not fixing up alternatives.
[ 68.906332] Booting processor 7/8 APIC 0x7
[ 68.928851] Initializing CPU#7
[ 68.989822] Calibrating delay using timer specific routine.. 5199.26 BogoMIPS (lpj=2599631)
[ 68.989831] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 68.989833] CPU: L2 Cache: 1024K (64 bytes/line)
[ 68.989836] CPU 7/7(2) -> Node 3 -> Core 1
[ 68.989963] Dual Core AMD Opteron(tm) Processor 885 stepping 02
[ 68.990839] CPU 7: Syncing TSC to CPU 0.
[ 68.991078] CPU 7: synchronized TSC with CPU 0 (last diff 3 cycles, maxerr 1731 cycles)
[ 68.991091] Brought up 8 CPUs
[ 69.134637] lockdep: disabled NMI watchdog.
[ 69.147145] Disabling vsyscall due to use of PM timer
[ 69.162245] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
[ 69.179418] time.c: Detected 2600.003 MHz processor.
[ 70.126641] migration_cost=394,475
[ 70.141165] NET: Registered protocol family 16
[ 70.154564] ACPI: bus type pci registered
[ 70.166550] PCI: Using configuration type 1
[ 70.179152] Unable to handle kernel paging request at 0000000100000007 RIP:
[ 70.192949] [<ffffffff8020c82b>] save_stack_trace+0x187/0x234
[ 70.217778] PGD 0
[ 70.223849] Oops: 0000 [1] SMP
[ 70.233344] last sysfs file:
[ 70.242217] CPU 2
[ 70.248288] Modules linked in:
[ 70.257474] Pid: 34, comm: khelper Not tainted 2.6.17-rc5-mm1 #4
[ 70.275425] RIP: 0010:[<ffffffff8020c82b>] [<ffffffff8020c82b>] save_stack_trace+0x187/0x234
[ 70.300435] RSP: 0000:ffff81019b51da48 EFLAGS: 00010046
[ 70.316884] RAX: 0000000000000001 RBX: ffff81019b51dab8 RCX: ffffffff805c86b8
[ 70.338210] RDX: 0000000000000001 RSI: 0000000000000009 RDI: ffff81019b51e000
[ 70.359537] RBP: ffff81019b51dab8 R08: 00000000ffffffff R09: 0000000000000000
[ 70.380862] R10: ffffffffffffffff R11: ffffffff805a4d18 R12: ffffffff807723f8
[ 70.402190] R13: ffff81011a295080 R14: ffff81011a295080 R15: 0000000000000000
[ 70.423514] FS: 0000000000000000(0000) GS:ffff81011a4d9e40(0000) knlGS:0000000000000000
[ 70.447694] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 70.464869] CR2: 0000000100000007 CR3: 0000000000201000 CR4: 00000000000006e0
[ 70.486196] Process khelper (pid: 34, threadinfo ffff81019b51c000, task ffff81011a295080)
[ 70.510635] Stack: 0000000000000003 ffff81019b51da58 ffff81019b51e000 ffffffff80248484
[ 70.534243] 0000000000000000 0000000000000001 ffffffff804bc5c8 ffff81019b51dab8
[ 70.558422] 0000000000000000 ffffffff807723f8
[ 70.573652] Call Trace:
[ 70.581545] [<ffffffff80248484>] __lockdep_acquire+0xa98/0xad2
[ 70.599289] [<ffffffff80246cab>] save_trace+0x3e/0xe6
[ 70.614698] [<ffffffff80246e43>] add_lock_to_list+0x79/0xa0
[ 70.631666] [<ffffffff8024837d>] __lockdep_acquire+0x991/0xad2
[ 70.649413] [<ffffffff8022bec4>] copy_process+0x1314/0x1816
[ 70.666380] [<ffffffff802488a5>] lockdep_acquire+0x82/0xa3
[ 70.683063] [<ffffffff8043af82>] _spin_lock+0x1c/0x28
[ 70.698471] [<ffffffff8022bec4>] copy_process+0x1314/0x1816
[ 70.715441] [<ffffffff8043b33f>] _spin_unlock_irq+0x28/0x2e
[ 70.732407] [<ffffffff8023f3cc>] alloc_pid+0x2b1/0x2d9
[ 70.748052] [<ffffffff8022c4c8>] do_fork+0x102/0x236
[ 70.763201] [<ffffffff8023f35e>] alloc_pid+0x243/0x2d9
[ 70.778874] [<ffffffff80247268>] mark_lock+0x3b/0x4fc
[ 70.794284] [<ffffffff80247268>] mark_lock+0x3b/0x4fc
[ 70.809670] [<ffffffff8020a51d>] kernel_thread+0x81/0xde
[ 70.825859] [<ffffffff8023e38b>] run_workqueue+0x17/0x10f
[ 70.842306] [<ffffffff8023df29>] ____call_usermodehelper+0x0/0x10e
[ 70.861088] [<ffffffff8020a57a>] child_rip+0x0/0x12
[ 70.875983] [<ffffffff8023ddc5>] __call_usermodehelper+0x32/0x4d
[ 70.894246] [<ffffffff8023e42d>] run_workqueue+0xb9/0x10f
[ 70.910694] [<ffffffff8023dd93>] __call_usermodehelper+0x0/0x4d
[ 70.928701] [<ffffffff8023e539>] worker_thread+0x0/0x128
[ 70.944889] [<ffffffff8023e62e>] worker_thread+0xf5/0x128
[ 70.961314] [<ffffffff802276bf>] default_wake_function+0x0/0xf
[ 70.979058] [<ffffffff8023e539>] worker_thread+0x0/0x128
[ 70.995247] [<ffffffff80241cba>] kthread+0xd1/0xfb
[ 71.009880] [<ffffffff8023e539>] worker_thread+0x0/0x128
[ 71.026068] [<ffffffff8020a582>] child_rip+0x8/0x12
[ 71.040959] [<ffffffff8043b33f>] _spin_unlock_irq+0x28/0x2e
[ 71.057929] [<ffffffff80209bcf>] restore_args+0x0/0x30
[ 71.073599] [<ffffffff80241be9>] kthread+0x0/0xfb
[ 71.087970] [<ffffffff8020a57a>] child_rip+0x0/0x12
[ 71.102861]
[ 71.107324]
[ 71.107324] Code: 4d 8b 50 08 75 1b 41 8b 14 24 49 8b 4c 24 08 49 8d 42 ff 89
[ 71.134383] RIP [<ffffffff8020c82b>] save_stack_trace+0x187/0x234 RSP <ffff81019b51da48>
[ 71.158926] CR2: 0000000100000007
[-- Attachment #4: lockdep-config.txt --]
[-- Type: text/plain, Size: 39350 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17-rc5-mm1
# Tue May 30 13:37:32 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
# CONFIG_SWAP_PREFETCH is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_UTS_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_KLIBC_ERRLIST=y
CONFIG_KLIBC_ZLIB=y
CONFIG_UID16=y
CONFIG_VM86=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_UNALIGNED_ZONE_BOUNDARIES is not set
# CONFIG_ADAPTIVE_READAHEAD is not set
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y
CONFIG_NR_CPUS=32
# CONFIG_HOTPLUG_CPU is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_REORDER is not set
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_ASUS=m
# CONFIG_ACPI_ATLAS is not set
CONFIG_ACPI_IBM=m
# CONFIG_ACPI_IBM_DOCK is not set
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_SONY is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_ACPI_CPUFREQ=m
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
#
# TCP congestion control
#
CONFIG_TCP_CONG_BIC=y
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
CONFIG_IPV6_TUNNEL=m
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_SECMARK is not set
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_H323 is not set
CONFIG_IP_NF_QUEUE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2 is not set
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=y
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_YAM=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_DOMAIN_ATTRS is not set
#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
CONFIG_SCSI_SATA_AHCI=m
# CONFIG_SCSI_PATA_ALI is not set
# CONFIG_SCSI_PATA_AMD is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_PATA_TRIFLEX is not set
# CONFIG_SCSI_PATA_MPIIX is not set
# CONFIG_SCSI_PATA_OLDPIIX is not set
CONFIG_SCSI_ATA_PIIX=m
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_PATA_NETCELL is not set
CONFIG_SCSI_SATA_NV=y
# CONFIG_SCSI_PATA_OPTI is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_PATA_PDC2027X is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_PATA_SIL680 is not set
# CONFIG_SCSI_PATA_SIS is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_PATA_VIA is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SRP=m
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
# CONFIG_SMSC_PHY is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
CONFIG_B44=m
CONFIG_FORCEDETH=m
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
CONFIG_DL2K=m
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
# CONFIG_R8169_VLAN is not set
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKY2 is not set
CONFIG_SK98LIN=m
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
#
# Ethernet (10000 Mbit)
#
CONFIG_CHELSIO_T1=m
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
CONFIG_PC300_MLPPP=y
CONFIG_FARSYNC=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
# CONFIG_ITCO_WDT is not set
CONFIG_SC1200_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=m
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_OCORES is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L1 is not set
# CONFIG_VIDEO_V4L1_COMPAT is not set
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_CX88 is not set
#
# Encoders and Decoders
#
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_CX25840 is not set
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
#
# V4L USB devices
#
# CONFIG_USB_QUICKCAM_MESSENGER is not set
#
# Radio Adapters
#
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_INTEL is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
CONFIG_FB_SAVAGE=m
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_VIRTUAL=m
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ANYDATA=m
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_IPATH_CORE=m
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
# CONFIG_INFINIBAND_ISER is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
CONFIG_9P_FS=m
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_MUTEX_ALLOC=y
CONFIG_DEBUG_MUTEX_DEADLOCKS=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_PROVE_SPIN_LOCKING=y
CONFIG_PROVE_RW_LOCKING=y
CONFIG_PROVE_MUTEX_LOCKING=y
CONFIG_PROVE_RWSEM_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_PROFILE_LIKELY=y
# CONFIG_WANT_EXTRA_DEBUG_INFORMATION is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SECLVL=m
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
next prev parent reply other threads:[~2006-05-30 20:43 UTC|newest]
Thread overview: 123+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-30 9:29 2.6.17-rc5-mm1 Andrew Morton
2006-05-30 9:42 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 10:05 ` [patch, -rc5-mm1] genirq: ia64 build fix Ingo Molnar
2006-05-30 10:09 ` [patch, -rc5-mm1] lock validator, irqtrace: support non-x86 architectures Ingo Molnar
2006-05-30 10:11 ` [patch, -rc5-mm1] lock validator: rwsem build fix for " Ingo Molnar
2006-05-30 10:12 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 10:48 ` BUG: possible deadlock detected! (sound) [Was: 2.6.17-rc5-mm1] Jiri Slaby
2006-05-30 10:48 ` Jiri Slaby
2006-05-30 11:06 ` Arjan van de Ven
2006-05-30 11:06 ` Arjan van de Ven
2006-05-30 12:44 ` Takashi Iwai
2006-05-30 12:59 ` Arjan van de Ven
2006-05-30 12:59 ` Arjan van de Ven
2006-05-30 13:09 ` Jiri Slaby
2006-05-30 13:09 ` Jiri Slaby
2006-06-01 15:28 ` Jiri Slaby
2006-06-01 15:28 ` Jiri Slaby
2006-05-30 12:44 ` Takashi Iwai
2006-05-30 11:02 ` BUG: warning at ... (netlink) " Jiri Slaby
2006-05-30 11:55 ` [patch, -rc5-mm1] lock validator: remove softirq.c WARN_ON Ingo Molnar
2006-05-30 16:00 ` Alexey Kuznetsov
2006-05-30 16:05 ` Arjan van de Ven
2006-05-30 16:15 ` Alexey Kuznetsov
2006-05-30 11:11 ` [patch, -rc5-mm1] lock validator, fix NULL type->name bug Ingo Molnar
2006-05-30 11:58 ` Mike Galbraith
2006-05-30 12:02 ` Ingo Molnar
2006-05-30 12:06 ` Mike Galbraith
2006-05-30 12:05 ` Mike Galbraith
2006-05-30 12:06 ` Ingo Molnar
2006-05-30 12:17 ` Mike Galbraith
2006-05-30 12:19 ` Ingo Molnar
2006-05-30 12:28 ` Mike Galbraith
2006-05-30 12:29 ` [patch, -rc5-mm1] lock validator: disable NMI watchdog if CONFIG_LOCKDEP, i386 Ingo Molnar
2006-05-30 12:34 ` [patch, -rc5-mm1] lock validator: fix NMI-disabling on x86_64 Ingo Molnar
2006-05-30 12:44 ` [patch, -rc5-mm1] lock validator: disable NMI watchdog if CONFIG_LOCKDEP, i386 Mike Galbraith
2006-05-30 19:14 ` Andi Kleen
2006-05-30 19:47 ` Ingo Molnar
2006-05-30 20:05 ` Ingo Molnar
2006-05-30 19:54 ` Andrew Morton
2006-05-31 4:34 ` Keith Owens
2006-05-30 12:14 ` [patch, -rc5-mm1] lock validator, fix NULL type->name bug Arjan van de Ven
2006-05-30 12:46 ` 2.6.17-rc5-mm1 Michal Piotrowski
2006-05-30 19:13 ` 2.6.17-rc5-mm1 Arjan van de Ven
2006-05-30 15:59 ` 2.6.17-rc5-mm1 Michal Piotrowski
2006-05-30 16:08 ` 2.6.17-rc5-mm1 Arjan van de Ven
2006-05-30 18:51 ` 2.6.17-rc5-mm1 Michal Piotrowski
2006-05-30 16:16 ` 2.6.17-rc5-mm1 Michal Piotrowski
2006-05-30 19:28 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 19:48 ` 2.6.17-rc5-mm1 Michal Piotrowski
2006-05-30 18:39 ` 2.6.17-rc5-mm1 Michal Piotrowski
2006-05-30 19:04 ` 2.6.17-rc5-mm1 Arjan van de Ven
2006-05-31 14:56 ` [patch 1/1] selinux: fix sb_lock/sb_security_lock nesting (Was: Re: 2.6.17-rc5-mm1) Stephen Smalley
2006-05-31 15:49 ` James Morris
2006-05-30 19:55 ` 2.6.17-rc5-mm1 Arjan van de Ven
2006-05-30 20:20 ` 2.6.17-rc5-mm1 Dave Jones
2006-05-30 20:32 ` 2.6.17-rc5-mm1 Arjan van de Ven
2006-05-30 18:55 ` 2.6.17-rc5-mm1 Michal Piotrowski
2006-05-30 18:57 ` Fwd: 2.6.17-rc5-mm1 Michal Piotrowski
2006-05-30 19:42 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 21:57 ` 2.6.17-rc5-mm1 Michal Piotrowski
2006-05-30 22:09 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 22:18 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 22:26 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 22:29 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 22:31 ` 2.6.17-rc5-mm1 Michal Piotrowski
2006-05-30 22:32 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-31 10:56 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 22:59 ` 2.6.17-rc5-mm1 Michal Piotrowski
2006-05-30 23:05 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 23:06 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 23:49 ` 2.6.17-rc5-mm1 Michal Piotrowski
2006-05-31 3:08 ` 2.6.17-rc5-mm1 Steven Rostedt
2006-05-30 19:59 ` Fwd: 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 19:45 ` 2.6.17-rc5-mm1 Andrew Morton
2006-05-31 13:51 ` 2.6.17-rc5-mm1 Michal Piotrowski
2006-05-31 14:02 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-31 14:05 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-31 14:12 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-31 15:05 ` 2.6.17-rc5-mm1 Michal Piotrowski
2006-05-31 15:20 ` [patch, -rc5-mm1] lock validator: irqflags-trace entry.S fix Ingo Molnar
2006-05-30 19:43 ` 2.6.17-rc5-mm1 Roland Dreier
2006-05-30 20:26 ` [patch, -rc5-mm1] lock validator: fix RT_HASH_LOCK_SZ Ingo Molnar
2006-05-30 20:43 ` Roland Dreier [this message]
2006-05-30 20:49 ` Ingo Molnar
2006-05-30 20:58 ` Roland Dreier
2006-05-30 21:01 ` Arjan van de Ven
2006-05-30 21:03 ` Roland Dreier
2006-05-30 21:14 ` Roland Dreier
2006-05-30 21:55 ` [Patch -rc5-mm1] Lockdep annotate rpc_populate for child-relationship of its mutex Arjan van de Ven
2006-05-30 21:19 ` [combo patch] lock validator -V2 Ingo Molnar
2006-05-30 21:07 ` 2.6.17-rc5-mm1 Brice Goglin
2006-05-30 21:07 ` 2.6.17-rc5-mm1 Laurent Riffard
2006-05-30 21:24 ` 2.6.17-rc5-mm1 Arjan van de Ven
2006-05-30 21:43 ` 2.6.17-rc5-mm1 Mel Gorman
2006-05-30 21:24 ` 2.6.17-rc5-mm1 Roland Dreier
2006-05-30 22:45 ` 2.6.17-rc5-mm1 Andrew Morton
2006-05-30 22:49 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 22:52 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 22:58 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 23:05 ` 2.6.17-rc5-mm1 Thomas Gleixner
2006-05-30 23:14 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-30 23:32 ` 2.6.17-rc5-mm1 Roland Dreier
2006-05-30 23:15 ` 2.6.17-rc5-mm1 Benjamin Herrenschmidt
2006-05-30 23:53 ` 2.6.17-rc5-mm1 Greg KH
2006-05-30 23:53 ` 2.6.17-rc5-mm1 Michal Piotrowski
2006-05-31 3:17 ` 2.6.17-rc5-mm1 Steven Rostedt
2006-05-31 4:14 ` 2.6.17-rc5-mm1 Andrew Morton
2006-05-31 6:31 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-31 11:50 ` 2.6.17-rc5-mm1 Steven Rostedt
2006-05-31 11:55 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-31 6:39 ` 2.6.17-rc5-mm1 Arjan van de Ven
2006-05-31 16:48 ` 2.6.17-rc5-mm1 Jesse Brandeburg
2006-05-31 23:08 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-05-31 17:39 ` 2.6.17-rc5-mm1 Laurent Riffard
2006-05-31 18:09 ` 2.6.17-rc5-mm1 Andrew Morton
2006-06-01 22:07 ` 2.6.17-rc5-mm1 Andrew Morton
2006-06-02 7:49 ` 2.6.17-rc5-mm1 Jan Beulich
2006-06-01 1:25 ` 2.6.17-rc5-mm1 Randy.Dunlap
2006-06-01 1:40 ` 2.6.17-rc5-mm1 Siddha, Suresh B
2006-06-01 2:17 ` 2.6.17-rc5-mm1 Randy.Dunlap
2006-06-01 1:43 ` 2.6.17-rc5-mm1 Andrew Morton
2006-06-01 6:14 ` 2.6.17-rc5-mm1 Ingo Molnar
2006-06-01 15:12 ` 2.6.17-rc5-mm1 Randy.Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ada1wub6y6b.fsf@cisco.com \
--to=rdreier@cisco.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.