From: Roland Dreier <rdreier@cisco.com>
To: linux-kernel@vger.kernel.org
Cc: tglx@linutronix.de
Subject: Hang early in boot with 2.6.27-git
Date: Wed, 22 Oct 2008 16:43:29 -0700 [thread overview]
Message-ID: <adaej28urfi.fsf@cisco.com> (raw)
Latest git (head 2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4) hangs early
in boot. One clue is that if I let it sit there for ~30 minutes, I get
a message about the tsc being unstable... the last messages are:
[ 2.255064] NET: Registered protocol family 2
[ 1528.453016] Clocksource tsc unstable (delta = 1499794012204 ns)
Any requests for debugging info or suggestions appreciated...
System is a dual-socket quad-core Xeon box. Full boot log below:
[ 0.000000] BIOS EBDA/lowmem at: 0009ec00/0009ec00
[ 0.000000] Linux version 2.6.27-dbg (rdreier@roland-1950-2) (gcc version 4.3.2 (Debian 4.3.2-1)8
[ 0.000000] Command line: root=/dev/sda1 ro console=ttyS0,115200n8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) ▮
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable)────┘
[ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI 2.4 present.m Corporation
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x3ffffffff804D B5C04F474331
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xcffa8 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping
[ 0.000000] last_map_addr: cffa8000 end: cffa8000
[ 0.000000] init_memory_mapping
[ 0.000000] last_map_addr: 230000000 end: 230000000
[ 0.000000] ACPI: RSDP 000F2900, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000F2980, 004C (r1 DELL PE_SC3 1 DELL 1)
[ 0.000000] ACPI: FACP 000F2A88, 00F4 (r3 DELL PE_SC3 1 DELL 1)
[ 0.000000] ACPI: DSDT CFFA8000, 2A90 (r1 DELL PE_SC3 1 MSFT 100000E)
[ 0.000000] ACPI: FACS CFFB7C00, 0040
[ 0.000000] ACPI: APIC 000F2B7C, 00C8 (r1 DELL PE_SC3 1 DELL 1)
[ 0.000000] ACPI: SPCR 000F2C5D, 0050 (r1 DELL PE_SC3 1 DELL 1)
[ 0.000000] ACPI: HPET 000F2CAD, 0038 (r1 DELL PE_SC3 1 DELL 1)
[ 0.000000] ACPI: MCFG 000F2CE5, 003C (r1 DELL PE_SC3 1 DELL 1)
[ 0.000000] ACPI: DMI detected: Dell PE 1950
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
[ 0.000000] bootmap [0000000000011000 - 0000000000056fff] pages 46
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000d4d508] TEXT DATA BSS ==> [0000200000 - 0000d4d508]
[ 0.000000] #3 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #4 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #5 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] 000fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x000cffa8
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64])
[ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec81000, GSI 64-87
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2044684
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda1 ro console=ttyS0,115200n8
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2660.062 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [ttyS0] enabled
[ 0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.004000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.004000] ... MAX_LOCK_DEPTH: 48
[ 0.004000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.004000] ... CLASSHASH_SIZE: 4096
[ 0.004000] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.004000] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.004000] ... CHAINHASH_SIZE: 8192
[ 0.004000] memory used by lock dependency info: 3839 kB
[ 0.004000] per task-struct memory footprint: 1920 bytes
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000
[ 0.004000] Memory: 8127060k/9175040k available (2643k kernel code, 260812k reserved, 1686k data)
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.12 B)
[ 0.013024] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.022443] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.026002] Mount-cache hash table entries: 256
[ 0.028909] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.033656] CPU: L2 cache: 4096K
[ 0.036005] CPU 0/0x0 -> Node 0
[ 0.040004] CPU: Physical Processor ID: 0
[ 0.044003] CPU: Processor Core ID: 0
[ 0.047647] CPU0: Thermal monitoring enabled (TM1)
[ 0.048004] using mwait in idle threads.
[ 0.052012] Freeing SMP alternatives: 18k freed
[ 0.056033] ACPI: Core revision 20080609
[ 0.066776] Setting APIC routing to flat
[ 0.068397] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.112782] CPU0: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07
[ 0.120001] lockdep: fixing up alternatives.
[ 0.120080] Booting processor 1 APIC 0x4 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5320.01 BogoMIPS (lpj=10640028)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 1/0x4 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.217398] CPU1: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07
[ 0.225239] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.228574] lockdep: fixing up alternatives.
[ 0.232029] Booting processor 2 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 5320.00 BogoMIPS (lpj=10640008)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 2/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU2: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.329382] CPU2: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07
[ 0.337239] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.340598] lockdep: fixing up alternatives.
[ 0.344040] Booting processor 3 APIC 0x5 ip 0x6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 5320.01 BogoMIPS (lpj=10640025)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 3/0x5 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU3: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.441408] CPU3: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07
[ 0.449236] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.452537] lockdep: fixing up alternatives.
[ 0.456029] Booting processor 4 APIC 0x2 ip 0x6000
[ 0.004000] Initializing CPU#4
[ 0.004000] Calibrating delay using timer specific routine.. 5319.99 BogoMIPS (lpj=10639996)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 4/0x2 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.004000] CPU4: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
[ 0.553451] CPU4: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07
[ 0.561239] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.564533] lockdep: fixing up alternatives.
[ 0.568036] Booting processor 5 APIC 0x6 ip 0x6000
[ 0.004000] Initializing CPU#5
[ 0.004000] Calibrating delay using timer specific routine.. 5320.00 BogoMIPS (lpj=10640018)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 5/0x6 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 2
[ 0.004000] CPU5: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
[ 0.665503] CPU5: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07
[ 0.673238] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.676537] lockdep: fixing up alternatives.
[ 0.680032] Booting processor 6 APIC 0x3 ip 0x6000
[ 0.004000] Initializing CPU#6
[ 0.004000] Calibrating delay using timer specific routine.. 5319.98 BogoMIPS (lpj=10639975)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 6/0x3 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.004000] CPU6: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
[ 0.777455] CPU6: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07
[ 0.785239] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.788551] lockdep: fixing up alternatives.
[ 0.792029] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.004000] Initializing CPU#7
[ 0.004000] Calibrating delay using timer specific routine.. 5320.01 BogoMIPS (lpj=10640024)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 7/0x7 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 3
[ 0.004000] CPU7: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
[ 0.889418] CPU7: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07
[ 0.897239] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.900016] Brought up 8 CPUs
[ 0.902969] Total of 8 processors activated (42560.16 BogoMIPS).
[ 0.904298] net_namespace: 1056 bytes
[ 0.908506] NET: Registered protocol family 16
[ 0.916301] No dock devices found.
[ 0.920167] ACPI: bus type pci registered
[ 0.924022] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.932005] PCI: MCFG area at e0000000 reserved in E820
[ 0.952507] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.960005] PCI: Using configuration type 1 for base access
[ 0.964005] PCI: Dell PowerEdge 1950 detected, enabling pci=bfsort.
[ 0.984015] ACPI: Interpreter enabled
[ 0.988013] ACPI: (supports S0 S5)
[ 0.992559] ACPI: Using IOAPIC for interrupt routing
[ 1.008401] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.016196] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.020028] pci 0000:00:00.0: PME# disabled
[ 1.024058] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 1.032006] pci 0000:00:02.0: PME# disabled
[ 1.036060] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.040006] pci 0000:00:03.0: PME# disabled
[ 1.044056] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 1.052006] pci 0000:00:04.0: PME# disabled
[ 1.056054] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 1.060006] pci 0000:00:05.0: PME# disabled
[ 1.064059] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 1.072006] pci 0000:00:06.0: PME# disabled
[ 1.076055] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.084006] pci 0000:00:07.0: PME# disabled
[ 1.088251] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.092007] pci 0000:00:1c.0: PME# disabled
[ 1.096297] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.104008] pci 0000:00:1d.7: PME# disabled
[ 1.109591] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 1.116052] pci 0000:05:00.0: PME# disabled
[ 1.121746] pci 0000:05:00.3: PME# supported from D0 D3hot D3cold
[ 1.128051] pci 0000:05:00.3: PME# disabled
[ 1.132784] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pc'
[ 1.145239] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 1.152052] pci 0000:06:00.0: PME# disabled
[ 1.157651] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
[ 1.164052] pci 0000:06:01.0: PME# disabled
[ 1.171895] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 1.176052] pci 0000:07:00.0: PME# disabled
[ 1.180510] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pc'
[ 1.197559] pci 0000:08:00.0: PME# supported from D3hot D3cold
[ 1.204052] pci 0000:08:00.0: PME# disabled
[ 1.214936] pci 0000:01:00.0: PXH quirk detected; SHPC device MSI disabled
[ 1.220028] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.228007] pci 0000:01:00.0: PME# disabled
[ 1.232028] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pc'
[ 1.240519] pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pc'
[ 1.253110] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.260008] pci 0000:03:00.0: PME# disabled
[ 1.264024] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pc'
[ 1.272177] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 1.280008] pci 0000:04:00.0: PME# disabled
[ 1.284256] pci 0000:00:1e.0: transparent bridge
[ 1.308326] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 *6 7 10 11 12)
[ 1.317298] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 1.324384] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 1.332386] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 *5 6 7 10 11 12)
[ 1.340100] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
[ 1.346308] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
[ 1.353761] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 1.361727] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 1.369655] SCSI subsystem initialized
[ 1.376227] usbcore: registered new interface driver usbfs
[ 1.380107] usbcore: registered new interface driver hub
[ 1.388080] usbcore: registered new device driver usb
[ 1.392145] PCI: Using ACPI for IRQ routing
[ 1.408118] PCI-GART: No AMD northbridge found.
[ 1.416052] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.420915] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.469330] pnp: PnP ACPI init
[ 1.472391] ACPI: bus type pnp registered
[ 1.486292] pnp: PnP ACPI: found 12 devices
[ 1.490483] ACPI: ACPI bus type pnp unregistered
[ 1.495125] system 00:08: ioport range 0x800-0x87f has been reserved
[ 1.501472] system 00:08: ioport range 0x880-0x8bf has been reserved
[ 1.507816] system 00:08: ioport range 0x8c0-0x8df has been reserved
[ 1.514166] system 00:08: ioport range 0x8e0-0x8e3 has been reserved
[ 1.520510] system 00:08: ioport range 0xc00-0xc7f has been reserved
[ 1.526855] system 00:08: ioport range 0xca0-0xca7 has been reserved
[ 1.533199] system 00:08: ioport range 0xca9-0xcab has been reserved
[ 1.539541] system 00:08: ioport range 0xcad-0xcaf has been reserved
[ 1.545894] system 00:09: ioport range 0xca8-0xca8 has been reserved
[ 1.552237] system 00:09: ioport range 0xcac-0xcac has been reserved
[ 1.558588] system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
[ 1.573263] pci 0000:07:00.0: PCI bridge, secondary bus 0000:08
[ 1.579174] pci 0000:07:00.0: IO window: disabled
[ 1.584136] pci 0000:07:00.0: MEM window: 0xf4000000-0xf7ffffff
[ 1.590265] pci 0000:07:00.0: PREFETCH window: disabled
[ 1.595792] pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
[ 1.601702] pci 0000:06:00.0: IO window: disabled
[ 1.606663] pci 0000:06:00.0: MEM window: 0xf4000000-0xf7ffffff
[ 1.612804] pci 0000:06:00.0: PREFETCH window: disabled
[ 1.618332] pci 0000:06:01.0: PCI bridge, secondary bus 0000:09
[ 1.624241] pci 0000:06:01.0: IO window: disabled
[ 1.629203] pci 0000:06:01.0: MEM window: disabled
[ 1.634206] pci 0000:06:01.0: PREFETCH window: disabled
[ 1.639734] pci 0000:05:00.0: PCI bridge, secondary bus 0000:06
[ 1.645643] pci 0000:05:00.0: IO window: disabled
[ 1.650605] pci 0000:05:00.0: MEM window: 0xf4000000-0xf7ffffff
[ 1.656734] pci 0000:05:00.0: PREFETCH window: disabled
[ 1.662260] pci 0000:05:00.3: PCI bridge, secondary bus 0000:0a
[ 1.668167] pci 0000:05:00.3: IO window: disabled
[ 1.673128] pci 0000:05:00.3: MEM window: disabled
[ 1.678132] pci 0000:05:00.3: PREFETCH window: disabled
[ 1.683658] pci 0000:00:02.0: PCI bridge, secondary bus 0000:05
[ 1.689566] pci 0000:00:02.0: IO window: disabled
[ 1.694438] pci 0000:00:02.0: MEM window: 0xf2000000-0xf7ffffff
[ 1.700533] pci 0000:00:02.0: PREFETCH window: disabled
[ 1.707009] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
[ 1.712921] pci 0000:01:00.0: IO window: 0xe000-0xefff
[ 1.718226] pci 0000:01:00.0: MEM window: 0xfc900000-0xfcafffff
[ 1.724309] pci 0000:01:00.0: PREFETCH window: disabled
[ 1.729701] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
[ 1.735612] pci 0000:00:03.0: IO window: 0xe000-0xefff
[ 1.740929] pci 0000:00:03.0: MEM window: 0xfc800000-0xfcafffff
[ 1.747012] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.752403] pci 0000:00:04.0: PCI bridge, secondary bus 0000:0b
[ 1.758311] pci 0000:00:04.0: IO window: disabled
[ 1.763181] pci 0000:00:04.0: MEM window: 0xfc600000-0xfc7fffff
[ 1.769266] pci 0000:00:04.0: PREFETCH window: 0x000000d8800000-0x000000d8ffffff
[ 1.776824] pci 0000:00:05.0: PCI bridge, secondary bus 0000:0c
[ 1.782731] pci 0000:00:05.0: IO window: disabled
[ 1.787602] pci 0000:00:05.0: MEM window: disabled
[ 1.792559] pci 0000:00:05.0: PREFETCH window: disabled
[ 1.797952] pci 0000:00:06.0: PCI bridge, secondary bus 0000:0d
[ 1.803862] pci 0000:00:06.0: IO window: disabled
[ 1.808733] pci 0000:00:06.0: MEM window: 0xfc300000-0xfc5fffff
[ 1.814818] pci 0000:00:06.0: PREFETCH window: 0x000000d8000000-0x000000d87fffff
[ 1.822377] pci 0000:00:07.0: PCI bridge, secondary bus 0000:0e
[ 1.828284] pci 0000:00:07.0: IO window: disabled
[ 1.833156] pci 0000:00:07.0: MEM window: disabled
[ 1.838112] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.843503] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[ 1.849411] pci 0000:03:00.0: IO window: disabled
[ 1.854285] pci 0000:03:00.0: MEM window: 0xf8000000-0xfbffffff
[ 1.860371] pci 0000:03:00.0: PREFETCH window: disabled
[ 1.865767] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 1.871675] pci 0000:00:1c.0: IO window: disabled
[ 1.876557] pci 0000:00:1c.0: MEM window: 0xf8000000-0xfbffffff
[ 1.882642] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.888037] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0f
[ 1.893948] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 1.899252] pci 0000:00:1e.0: MEM window: 0xfc100000-0xfc2fffff
[ 1.905338] pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 1.912909] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.919697] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.926618] pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.933813] pci 0000:06:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.940876] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.947584] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.954290] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.960997] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.967709] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.972491] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 1.978401] bus: 05 index 0 mmio: [0x0-0x0]
[ 1.982576] bus: 05 index 1 mmio: [0xf2000000-0xf7ffffff]
[ 1.987965] bus: 05 index 2 mmio: [0x0-0x0]
[ 1.992139] bus: 05 index 3 mmio: [0x0-0x0]
[ 1.996325] bus: 06 index 0 mmio: [0x0-0x0]
[ 2.000500] bus: 06 index 1 mmio: [0xf4000000-0xf7ffffff]
[ 2.005889] bus: 06 index 2 mmio: [0x0-0x0]
[ 2.010064] bus: 06 index 3 mmio: [0x0-0x0]
[ 2.014238] bus: 07 index 0 mmio: [0x0-0x0]
[ 2.018413] bus: 07 index 1 mmio: [0xf4000000-0xf7ffffff]
[ 2.023800] bus: 07 index 2 mmio: [0x0-0x0]
[ 2.027976] bus: 07 index 3 mmio: [0x0-0x0]
[ 2.032150] bus: 08 index 0 mmio: [0x0-0x0]
[ 2.036324] bus: 08 index 1 mmio: [0xf4000000-0xf7ffffff]
[ 2.041714] bus: 08 index 2 mmio: [0x0-0x0]
[ 2.045889] bus: 08 index 3 mmio: [0x0-0x0]
[ 2.050064] bus: 09 index 0 mmio: [0x0-0x0]
[ 2.054239] bus: 09 index 1 mmio: [0x0-0x0]
[ 2.058414] bus: 09 index 2 mmio: [0x0-0x0]
[ 2.062588] bus: 09 index 3 mmio: [0x0-0x0]
[ 2.066762] bus: 0a index 0 mmio: [0x0-0x0]
[ 2.070939] bus: 0a index 1 mmio: [0x0-0x0]
[ 2.075113] bus: 0a index 2 mmio: [0x0-0x0]
[ 2.079288] bus: 0a index 3 mmio: [0x0-0x0]
[ 2.083463] bus: 01 index 0 io port: [0xe000-0xefff]
[ 2.088418] bus: 01 index 1 mmio: [0xfc800000-0xfcafffff]
[ 2.093806] bus: 01 index 2 mmio: [0x0-0x0]
[ 2.097980] bus: 01 index 3 mmio: [0x0-0x0]
[ 2.102155] bus: 02 index 0 io port: [0xe000-0xefff]
[ 2.107110] bus: 02 index 1 mmio: [0xfc900000-0xfcafffff]
[ 2.112498] bus: 02 index 2 mmio: [0x0-0x0]
[ 2.116672] bus: 02 index 3 mmio: [0x0-0x0]
[ 2.120848] bus: 0b index 0 mmio: [0x0-0x0]
[ 2.125032] bus: 0b index 1 mmio: [0xfc600000-0xfc7fffff]
[ 2.130420] bus: 0b index 2 mmio: [0xd8800000-0xd8ffffff]
[ 2.135808] bus: 0b index 3 mmio: [0x0-0x0]
[ 2.139984] bus: 0c index 0 mmio: [0x0-0x0]
[ 2.144158] bus: 0c index 1 mmio: [0x0-0x0]
[ 2.148333] bus: 0c index 2 mmio: [0x0-0x0]
[ 2.152509] bus: 0c index 3 mmio: [0x0-0x0]
[ 2.156684] bus: 0d index 0 mmio: [0x0-0x0]
[ 2.160858] bus: 0d index 1 mmio: [0xfc300000-0xfc5fffff]
[ 2.166246] bus: 0d index 2 mmio: [0xd8000000-0xd87fffff]
[ 2.171636] bus: 0d index 3 mmio: [0x0-0x0]
[ 2.175812] bus: 0e index 0 mmio: [0x0-0x0]
[ 2.179986] bus: 0e index 1 mmio: [0x0-0x0]
[ 2.184162] bus: 0e index 2 mmio: [0x0-0x0]
[ 2.188337] bus: 0e index 3 mmio: [0x0-0x0]
[ 2.192513] bus: 03 index 0 mmio: [0x0-0x0]
[ 2.196687] bus: 03 index 1 mmio: [0xf8000000-0xfbffffff]
[ 2.202077] bus: 03 index 2 mmio: [0x0-0x0]
[ 2.206253] bus: 03 index 3 mmio: [0x0-0x0]
[ 2.210428] bus: 04 index 0 mmio: [0x0-0x0]
[ 2.214604] bus: 04 index 1 mmio: [0xf8000000-0xfbffffff]
[ 2.219992] bus: 04 index 2 mmio: [0x0-0x0]
[ 2.224166] bus: 04 index 3 mmio: [0x0-0x0]
[ 2.228343] bus: 0f index 0 io port: [0xd000-0xdfff]
[ 2.233299] bus: 0f index 1 mmio: [0xfc100000-0xfc2fffff]
[ 2.238687] bus: 0f index 2 mmio: [0xd0000000-0xd7ffffff]
[ 2.244077] bus: 0f index 3 io port: [0x00-0xffff]
[ 2.248859] bus: 0f index 4 mmio: [0x000000-0xffffffffffffffff]
[ 2.255064] NET: Registered protocol family 2
[ 1528.453016] Clocksource tsc unstable (delta = 1499794012204 ns)
next reply other threads:[~2008-10-22 23:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-22 23:43 Roland Dreier [this message]
2008-10-23 0:03 ` Hang early in boot with 2.6.27-git Yinghai Lu
2008-10-23 0:15 ` Roland Dreier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=adaej28urfi.fsf@cisco.com \
--to=rdreier@cisco.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.