Re: [PATCH v3 3/3] drm: renesas: rzg2l_mipi_dsi: Fix deassert/assert of CMN_RSTB signal

[Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>]

Hi Biju,
Thanks for your patch.

On Mon, Mar 30, 2026 at 11:44:46AM +0100, Biju wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
> 
> The RZ/G2L hardware manual (Rev. 1.50, May 2025), Section 34.4.2.1,
> requires deasserting the CMN_RSTB signal after setting the Link registers.
> Move the reset_control_deassert() call from rzg2l_mipi_dsi_dphy_init() to
> rzg2l_mipi_dsi_startup(), placing it after the Link register writes. This
> reset signal is optional for RZ/V2H SoCs, so add a NULL check. Drop the
> unused ret variable from rzg2l_mipi_dsi_dphy_init().
> 
> The CMN_RSTB signal is not required for reading PHY registers in the
> probe. Move reset_control_assert() from rzg2l_mipi_dsi_dphy_exit() to
> rzg2l_mipi_dsi_stop(), placing it before the dphy_exit() call. Since this
> reset signal is optional for RZ/V2H, the call is a no-op on that SoC.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>

Looks good to me, thanks.
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>

Kind Regards,
Tommaso

> ---
> v2->v3:
>  * Merged patch#2 and patch#3 to avoid breakage.
>  * Updated commit description
> v1->v2:
>  * Updated commit header and description
>  * Moved the code from rzg2l_mipi_dsi_dphy_init() to rzg2l_mipi_dsi_startup()
>  * Moved the check before calling reset_control_deassert(), so that it will be
>    skipped for RZ/V2H SoC
> ---
>  drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> index 9d9f77d8f949..715872130780 100644
> --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> @@ -484,7 +484,6 @@ static int rzg2l_mipi_dsi_dphy_init(struct rzg2l_mipi_dsi *dsi,
>  	u32 dphytim1;
>  	u32 dphytim2;
>  	u32 dphytim3;
> -	int ret;
>  
>  	/* All DSI global operation timings are set with recommended setting */
>  	for (i = 0; i < ARRAY_SIZE(rzg2l_mipi_dsi_global_timings); ++i) {
> @@ -524,12 +523,6 @@ static int rzg2l_mipi_dsi_dphy_init(struct rzg2l_mipi_dsi *dsi,
>  	rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYTIM2, dphytim2);
>  	rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYTIM3, dphytim3);
>  
> -	ret = reset_control_deassert(dsi->rstc);
> -	if (ret < 0)
> -		return ret;
> -
> -	fsleep(1000);
> -
>  	return 0;
>  }
>  
> @@ -541,8 +534,6 @@ static void rzg2l_mipi_dsi_dphy_exit(struct rzg2l_mipi_dsi *dsi)
>  
>  	dphyctrl0 &= ~(DSIDPHYCTRL0_EN_LDO1200 | DSIDPHYCTRL0_EN_BGR);
>  	rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYCTRL0, dphyctrl0);
> -
> -	reset_control_assert(dsi->rstc);
>  }
>  
>  static int rzg2l_dphy_conf_clks(struct rzg2l_mipi_dsi *dsi, unsigned long mode_freq,
> @@ -811,6 +802,14 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
>  	FIELD_MODIFY(DSISETR_MRPSZ, &dsisetr, RZG2L_DCS_BUF_SIZE);
>  	rzg2l_mipi_dsi_link_write(dsi, DSISETR, dsisetr);
>  
> +	if (dsi->rstc) {
> +		ret = reset_control_deassert(dsi->rstc);
> +		if (ret < 0)
> +			goto err_phy;
> +
> +		fsleep(1000);
> +	}
> +
>  	return 0;
>  
>  err_phy:
> @@ -822,6 +821,7 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
>  
>  static void rzg2l_mipi_dsi_stop(struct rzg2l_mipi_dsi *dsi)
>  {
> +	reset_control_assert(dsi->rstc);
>  	dsi->info->dphy_exit(dsi);
>  	pm_runtime_put(dsi->dev);
>  }
> -- 
> 2.43.0
>